Multiquip ST2037/ST2037F

New Multiquip ST2037/ST2037F Electric Submersible Clean-Water Pump for Sale

Versatile pumps with a wide variety of applications that support Construction Contractors, Utilities Managers, Municipalities, and Home Owners.

Compact, rugged, trusted ~ Multiquip Submersible Pump Line is ideal for removing water from well casings, construction sites, cofferdams, manholes, basements, fountains, basins, rooftops, and excavations.

Powerful Single and Three Phase models perfect for removing water from confined areas. The compact design and high performance engineering ensures professional results for every application. Single Phase model discharge sizes range from 1.125” to 3”. Three Phase model discharge sizes range from 3” to 6”.

Popular, and versatile, the ST2037 is a low maintenance pump that is designed for long hard industrial pump applications. Features include oil-filled dual shaft seals, aluminum housing, streamline shape, powerful 115V motor, internal thermal protection, and provides UL/CUL certifications. Model ST2037F comes with attached industrial float switch.

This lightweight, compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. This is a powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, Municipalities, and Homeowners. Further, the ST2037 incorporates a rugged cast aluminum housing, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller and molded 25’ Power Cable with strain relief. Model ST2037F is available that provides a tethered industrial mechanical float switch assembly.

• 1.0HP, 115V/9.8A, 1Ø, UL & CUL Listed Electric Motor.
• Built-in Overload Protection.
• 2” (NPT) Female Discharge Port.
• Reliable double mechanical oil-filled seals.
• Cast iron/steel motor casing serves as heat conductor.
• Pumps Liquid Up To 120° F.
• 25’ of molded power cord w/strain relief
• Dewaters Flat Surfaces Up To 1/2” Levels.

This compact submersible centrifugal pump is ideal for moving water in multiple confined and open area applications. This is a powerful, versatile, low maintenance pump that is perfect for a wide range of operations supporting Contractors, Service Utilities, Municipalities, and Homeowners.

Multiquip offers the following Optional Accessories for the ST2037:

• Float Switch ~ SW1A: Mechanically activated, wide-angle design single ON/OFF float switch that is not sensitive to rotation or turbulence.  A 120V “piggy-back” plug provides convenient operational set-up. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.
  • SW1A Features
    • 120/230V 50/60Hz Single Phase
    • Rated for 13A running and 85A start-up.
    • Adjustable activation range 6” to 18”.
    • High impact PVC, corrosion resistant float housing.
    • Operates up to 140° F.
    • Heavy duty electrical contacts.
    • UL/CL Listed.
    • Passed NSF Standard 61 Protocol.
    • 16 gauge, 2-conductor water resistant cable - 20’ cord length.
    • Includes standard mounting cable & pipe clamps.
• Control Box ~ CB3: 120V 50/60 Hz Single Phase Controller w/two mechanically activated wide angle ON/OFF float switches (SW1WOPA). This box is selected if the operations call for a manual ON/OFF/AUTO Switch. Housing manufactured from polyester reinforced fiberglass, water resistant, UL/CSA Certified. Use with any 115V or 120V model submersible pump. For all Multiquip submersible single phase, 115V Pumps, and other comparable pump models.
• Double Float Switch ~ SW2A: Consists of two mechanically activated wide-angle ON/OFF float switches and a splice tube. The slice tube contains a Holding Relay which enables the floats to function in series. It is well suited for confined applications requiring an accurate pumping range. A Holding Relay eliminates pump chatter in turbulent water conditions. (Deactivation point @ 4” below mounting – Activation point @ 4” above mounting).
  • SW2A Features
    • 120/230V 50/60Hz Single Phase
    • Rated for 13A running and 78A start-up.
    • Adjustable activation range 2” to 48”.
    • High impact PP, corrosion resistant float housing.
    • Operates up to 140° F.
    • Heavy duty electrical contacts.
    • UL/CSA Certified.
    • Passed NSF Standard 61 Protocol.
    • Cable attached to Float Housings: 16 gauge, 2-conductor water resistant
    • Cable above Splice: 14 gauge 3 conductor w/‘piggy-back’ 120V plug w/20’ cord Length.
    • Includes standard mounting cable & pipe clamps.
  • Discharge Hose – NPT Thread
    • HD250 - (50’ L 2” Diameter)
  • Discharge Hose – Quick Disconnect Couplers
    • HDQ250 - (50’ L 2” Diameter)