Wirtgen KMA 240i

New Wirtgen for Sale

New Wirtgen KMA 240i Mixer for Sale

The mobile cold recycling mixing plant is simple to transport and quick to set up in the direct vicinity of the operation site. The robust twin-shaft compulsory mixer achieves high mixing performance levels. Microprocessor-controlled injection systems for the addition of a wide range of binding agents ensure that the materials are mixed precisely to formula. The slewing discharge conveyor with its wide range of motion enables the processed cold mix to be stockpiled or continually loaded onto transport vehicles.

Effective and environmentally friendly mix preparation

  • The KMA 240i high-performance cold recycling mixing plant is designed for the resource-friendly production of high-quality mix at a massive mixing capacity of more than 265 t (240 tons) per hour.
  • The KMA 240i is capable of processing a wide variety of base materials, such as recycled construction materials, milled asphalt material, demolished concrete, or virgin road construction materials, as well as binding agents, such as cement, bitumen emulsion, or foamed bitumen.
  • The mix is ideally suited for any type of construction project, e.g. for cement-treated or long-lasting bituminous base layers in road and path construction, parking lots, and industrial areas.
  • The mobile design of the cold recycling mixing plant allows the machine to be transported directly to the job site, saving both time and money.
  • The ability to completely recycle materials in combination with cold processing results in significant CO2 and energy savings with minimal construction costs and project periods.
Dimensions
Length Excluding Cabin: 49’3”
Including Cabin: 49’3”
Width 8’2”
Height 13’1”
Weight 70,217 lbs.
Max. Particle Size 1.8
Engine/Drivetrain
Engine Make Deutz
Engine Model TCD 6.1 L6
Engine Type Engine Type
Cylinders 6
Horsepower 173 HP
Displacement 370 in³
Fuel Consumption 8.7 gal/h
Fuel Tank Capacity 106 gallons
Operational
Hopper 2 x 212 ft³
Capacity Conveyor:
-Feeding auger for hydraulic binding agents: 34 yd³
-Added water: 53 gal/min
-Added emulsion: 48 gal/min
-Added hot bitumen for foamed bitumen: 42 gal/min
-Heating for hot bitumen system: 42 V
Feed Height 11'10"
Swing Discharge conveyor (right/left): 20°/35°
Belt Conveyor Width Conveyor to mixer: 3'3"
Discharge Conveyor: 2'7"
Mixer Design Twin-shaft pugmill
Mixer Operating Principle Continuous Mixer
Mixing Capacity 265 t/h
Mixer Engine Power 2 x 30 kW
Wear Protection Wear lining on all sides
Feed Width 12'2"
Mixer Type Twin-shaft compulsory mixer
Electrical
Voltage 24 V
  • Exhaust emissions category: EU Stage 5/US EPA Tier 4f
  • Design: Twin-shaft pugmill
  • Operating weight, CE: 70.217 lbs
  • Width: 8 ft 2 in
  • Feeding width: 12 ft 2 in
  • Feeding height (average): 11 ft 10 in
  • Operating principle: Continuous mixer
  • Height: 13 ft 1 in
  • Displacement: 370 in³
  • Length excluding cabin / including cabin: 49 ft 3 in / 49 ft 3 in
  • Power: 129 kW / 173 hp
  • Max. particle size: 1.8 in
  • Mixing performance: 265 t/hr

 

Standard Equipment

  • Basic Machine
    • Base Machine with engine
    • Mixing plant capacity of 265 t/h (240 t/h) for producing cold mixes using granulated asphalt, recycled concrete granulate and/or new mineral aggregate mixtures
    • Simple transport because the entire unit is mounted on a trailer
    • Semi-trailer with three air suspension axles and an automatic, load-dependent dual-circuit air brake with EBS (electronic braking system)
    • Registered according to European road transport directives
    • Hydraulic and mechanical supports enable the mixing plant to be set up quickly and easily
    • Large proportioning hopper, vertically divided to enable double-sided loading of two different raw materials with a capacity of 2 x 212 ft³ (2 x 6 m³).  The composition of the material is adjusted via sliders on the outlet of the proportioning hopper and monitored by laser scanners.  When working with just one raw material, the entire 242 ft³ (12 m³) volume of the proportioning hopper can be made use of.  The filling process can be carried out from both sides or just from one
    • Oversize grain separation by shaker grids on the dosing unit for maximum grain size of 2 in (45 mm).  The grids can be folded up hydraulically for cleaning
  • Mixing Unit
    • Integrated belt conveyor scales for continuous recording of the minerals
    • Twin-shaft continuous mixer with wear lining ensures that the mix is processed homogeneously
    • Adjustable metering gate for optimizing the mixer filler level
  • Spraying Unit/Binding Agent Addition
    • Regulated feeding auger for hydraulic binding agents (cement/lime).  Maximum feeding volume: 34 yd³/h (26 m³/h)
    • Connection for binder addition from a silo
    • Double trough system to ensure that the hydraulic binding agent is accurately measured and dosed.  The two trough auger conveyors are alternately weighed and emptied
    • A spraying system for adding water.  Equipped with an eccentric auger pump (max. 53 gal/min (200 l/min)), flow-through meter and a spray bar
    • Automatic monitoring and regulation system for the predefined feeding quantities of binding agents and aggregates
    • Load limitation regulator ensures optimum plant performance throughout the entire mixing and dosing process
  • Operator’s Platform
    • Clearly arranged main control panel with a material flow diagram
    • Multifunctional control color display showing important process parameters
    • Detailed machine diagnostics on the control display
    • Detailed visualization of job data and site-related logging
    • In service mode, the individual drive and control units can be activated manually
    • Operator’s platform with cabin
  • Miscellaneous
    • Hydraulically swiveling loading conveyor for transport onto a stock-pile or for direct loading onto a truck
    • The loading conveyor can be folded in hydraulically for transporting the plant
    • Comprehensive LED lighting system for night operations
    • Safety package with emergency stop switches
    • Tool box with extensive set of tools for maintenance and servicing
    • Pre-fitting for installing the WITOS FleetView control unit
    • Numerous, easily accessible storage spaces

 

Standard Equipment, can be replaced with optional equipment if desired

  • Spraying Unit/Binding Agent Addition
    • Locking parts in place of additional spraying units
  • Miscellaneous
    • Standard painting in RAL 9001 (cream)
    • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Spraying Unit/Binding Agent Addition
    • Spraying system for bitumen emulsion
    • Spraying system for foamed bitumen/bitumen emulsion
    • Loading funnel for loading the cement auger conveyor with cement bags
    • Binder monitoring and aeration in the transfer silo
  • Operator’s Platform
    • Air conditioner
    • Cabin heater
    • Printer for logging the job data
    • USB interface for retrieving the job data
  • Miscellaneous
    • Painting in one special color (RAL)
    • Painting in two special colors (RAL)
    • Model without WITOS FleetView
    • Loading conveyor stripping-off brush
    • Adjustable deflector plate on the discharge conveyor
    • High-pressure cleaner 5.3 gal/min (20 l/min), 2,901 psi (200 bar)
    • Diesel tank filling pump with suction hose
    • Monitor system with 2 cameras, monitor and extra LED working lights
    • Pre-fitting for LED lighting balloons
    • LED lighting balloon, 24 volt
    • Central lubrication unit for the mixer and the discharge conveyor
    • Connection hose for water or bitumen emulsion
    • Heated connection hose for hot bitumen

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE Wirtgen
MODEL KMA 240i

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

Wirtgen KMA 240i

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Wirtgen KMA 240i Mixer for Sale

The mobile cold recycling mixing plant is simple to transport and quick to set up in the direct vicinity of the operation site. The robust twin-shaft compulsory mixer achieves high mixing performance levels. Microprocessor-controlled injection systems for the addition of a wide range of binding agents ensure that the materials are mixed precisely to formula. The slewing discharge conveyor with its wide range of motion enables the processed cold mix to be stockpiled or continually loaded onto transport vehicles.

Effective and environmentally friendly mix preparation

  • The KMA 240i high-performance cold recycling mixing plant is designed for the resource-friendly production of high-quality mix at a massive mixing capacity of more than 265 t (240 tons) per hour.
  • The KMA 240i is capable of processing a wide variety of base materials, such as recycled construction materials, milled asphalt material, demolished concrete, or virgin road construction materials, as well as binding agents, such as cement, bitumen emulsion, or foamed bitumen.
  • The mix is ideally suited for any type of construction project, e.g. for cement-treated or long-lasting bituminous base layers in road and path construction, parking lots, and industrial areas.
  • The mobile design of the cold recycling mixing plant allows the machine to be transported directly to the job site, saving both time and money.
  • The ability to completely recycle materials in combination with cold processing results in significant CO2 and energy savings with minimal construction costs and project periods.
GENERAL INFORMATION
Manufacturer
Wirtgen
Model Year
Model
KMA 240i
Condition
NEW
Dimensions
Length
Excluding Cabin: 49’3” Including Cabin: 49’3”
Width
8’2”
Height
13’1”
Weight
70,217 lbs.
Max. Particle Size
1.8
Engine/Drivetrain
Engine Make
Deutz
Engine Model
TCD 6.1 L6
Engine Type
Engine Type
Cylinders
6
Horsepower
173 HP
Displacement
370 in³
Fuel Consumption
8.7 gal/h
Fuel Tank Capacity
106 gallons
Operational
Hopper
2 x 212 ft³
Capacity
Conveyor: -Feeding auger for hydraulic binding agents: 34 yd³ -Added water: 53 gal/min -Added emulsion: 48 gal/min -Added hot bitumen for foamed bitumen: 42 gal/min -Heating for hot bitumen system: 42 V
Feed Height
11'10"
Swing
Discharge conveyor (right/left): 20°/35°
Belt Conveyor Width
Conveyor to mixer: 3'3" Discharge Conveyor: 2'7"
Mixer Design
Twin-shaft pugmill
Mixer Operating Principle
Continuous Mixer
Mixing Capacity
265 t/h
Mixer Engine Power
2 x 30 kW
Wear Protection
Wear lining on all sides
Feed Width
12'2"
Mixer Type
Twin-shaft compulsory mixer
Electrical
Voltage
24 V

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT