Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
|
New Rosco CSV Chip Spreader for Sale Serving as the most advanced chip spreader in our product line, the Rosco CSV continues our company’s commitment to the preservation industry. The variable width spread hopper and smaller overall footprint provide flexibility that enables chipping within confined areas such as urban routes. Special consideration has been given to the operator’s comfort, safety and visibility making this equipment extremely enjoyable to operate. Given the raw power of this unit, the quality of the finished product remains the same even in areas with rough, steep terrain.
|
| Conveyor | |
|---|---|
| Conveyor Belt Width | 20” |
| Belt Conveyor | Two independently operated, aggregate feed conveyors Adjustable tail pulleys with pillow block style bearings, grease zerks for each bearing Auto and manual system controlled from touch pad system integrated with Plus+1 system Sonic sensors when in auto mode |
| Belt Conveyor Speed | 0 to 550’ per minute (167.64 m per minute) |
| Body | |
|---|---|
| Steering | Fully hydraulic, orbital type Independent of drive system |
| Dimensions | |
|---|---|
| Length | 25’10” |
| Width | 8’6” |
| Height | 8’8”, beacon retracted |
| Weight | Unloaded: 23,720 lbs. Loaded: 36,000 lbs., 16’ wide |
| Wheelbase | 12’10.5” |
| Ground Clearance | 7” |
| Turning Radius | Outside: 26’ Inside: 22’3” |
| Axle Oscillation | Front: 52,900 lbs (23,995 kg) rated capacity, oscillating type |
| Shipping Length | 25'10" |
| Shipping Width | 8'6" w/hopper |
| Shipping Height | 8'8" |
| Engine | |
|---|---|
| Engine Make | Cummins |
| Engine Type | Tier 4 Final, diesel turbocharged engine |
| Horsepower | 275 HP |
| Air Cleaner | Dry type dual air cleaner system with indicator |
| Fuel Type | Fuel filter, fuel water separator filter |
| Fuel Tank Capacity | 65 Gallons |
| Battery | 12 volt negative ground system; 12 volt batteries |
| Alternator | Dual 1000 amp |
| Fan Drive Type | Proportional: maximize HP, reduce noise and automatic cleanout 45 cc/rev pump to provide optimal flow to the fan drive and steering circuit 1,325 psi orbital steering |
| Aggregate Delivery | Variable Width |
| Control System | Hydrostatic control system Manual mode: Operator can vary forward/reverse speeds of unit with joystick Speed ranges: 0 to 20 mph (0 to 32.1 kph), high range 0 to 10 mph (0 to 16 kph), low and reverse ranges Application rate control: - Computer monitors the actual speed of the spreader, varies gate opening to maintain the set application rate - Plus+1 CAN Bus system with auto-rate control monitors actual speed of the spreader regardless of load conditions - Programmable application rate in lbs per sq. yard - Include rock size, type, chipping width, feet per minute and accumulative totals - Ability to access memory settings service screens, system faults, engine faults, machine settings, calibration settings and display units in English or metric - Control switches for the working lights, turn/hazard signals and beacon |
| Drivetrain | |
|---|---|
| Drive | Proportional hydraulic fan drive: maximize hp (kw), reduce noise and automatic cleanout Fuel filter, fuel water separator filter Electrical variable controlled engine throttle |
| Track Width | 6'3" (Front) 6'9" (Rear) |
| Drive Type | Hydrostatic Front Wheel Drive Propel System |
| Hydrostatic Drive | Hydrostatic Pump Single H1 electric controlled pump 10.07 cubic in (165,017 cubic mm) rev designed to provide optimum traction for two or four wheel drive system Hydraulic pump has pressure compensating pump for auxiliary systems |
| Hydraulic | |
|---|---|
| Pump | Single H1 electric controlled variable displacement pump Front wheel drive is standard Two or four wheel drive system 10.07 cubic in rev designed to provide optimum traction for two or four wheel drive system Pressure compensating pump for auxiliary systems |
| Hydraulic Capacity | 75 gallons |
| Operational | |
|---|---|
| Front Axle | 24.97:1 ratio, wet disc brakes, 5,400 lbs (2,449 kg) application Powered by 9.82 cubic in (160,921 cubic mm), rev two-speed hydraulic drive motor Automotive type, drive shaft axle connection between axle and hydraulic drive motor |
| Rear Axle | Two-wheel drive system Minimum 22,500 lbs (10,205 kg) rated capacity 16.5” (.419 m) diameter, 7” (177.8 mm) wide brakes, manual slack adjusters Drum type brakes, spring applied and hydraulic released Minimum 7” (177.8 mm) ground clearance |
| Hopper | Spread: 0’ to 16’ (0 to 4.87 m) hopper Individual gate controls that are operated from the control station via electric over hydraulic 12” (.304 m) augers Rear: Two independent manual flow control gates easily accessible from operator’s station for the conveyors Skirting in the receiving hopper to minimize spillage Operator controlled folding hopper wings |
| Hopper Capacity | Spread: 1 cubic yards per side Rear: 3.5 cubic yards struck |
| Spreader Width | 8'-16' |
| Hitch | Truck: Electric over hydraulically adjustable Electronically controlled from the driver’s station Electronic over hydraulic released locking mechanism Spring loaded, hydraulically adjustable with hydraulic release |
| Spreader/Auger | 1” |
| Transport Width | 8'6" |
| Hopper Opening | Maximum opening of 1”; Full length rejection screen on the spread hopper |
| Hopper Width | 10’-6’6” (receiving rear hopper) |
| Operator Area | One full console on left side, 15” (38.1 cm) slide out platform for optional field of view Right hand remote operator control Appropriate foot brake control Parking brake electronically controlled on main control console Access to engine and hydraulic components accessible from operator’s deck Cushioned and adjustable seat |
| Hopper Spread Wall | Spread roll 0.25” (6.35 mm) thick wall |
| Auxiliary Pump | Capacity to operate the hydraulic gate cylinder, hopper extension, augers, conveyors and spread roll on aggregate hopper Auxiliary circuits have minimum 500 psi relief setting for the hydraulic gate cylinder 2,500 PSI conveyor |
| Hopper Diameter | 6.625" (spread roll) (Spread Roll) |
| Hopper Speed | 150 RPMS Hydraulically driven spread roll |
| Brakes/Wheels/Tires | |
|---|---|
| Brakes | Two wheel drive: Front axle hydraulic multiple wet disc type Rear axle hydraulic actuated brakes, spring applied and hydraulic released |
| Tires | 385/65R 22.5 |
| Wheels | Budd-disc style |
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Rosco |
| MODEL | CSV |
Do you want to know if renting makes more economical sense?
Call us and find out today.
