Hitachi ZW220-6 Loader
With substantial loading capacity, powerful digging force and impressive travel speeds, the Hitachi ZW-6 wheel loaders offer exceptional levels of performance, without compromising on efficiency—thanks to low levels of fuel consumption.
The innovative engineering, reliable features and durable components on the ZW220‑6 and ZW250‑6 demonstrate Hitachi’s capability for manufacturing construction machinery of the highest quality. It is also extremely versatile to meet the diverse needs of North American customers.
RELIABILITY
VERSATILITY
QUALITY
TECHNOLOGY
| Dimensions | |
|---|---|
| Length | 27’3” (Standard Arm) 28’11” (High Lift Arm) |
| Width | 9’2” |
| Height | 11.0’ |
| Weight | 38,912 lbs. (Standard Arm) 39,352 lbs. (High Lift Arm) |
| Wheelbase | 10’10” |
| Ground Clearance | 1’6” |
| Turning Radius | 19.7’ |
| Steering Angle | Each direction 37 degrees; total 74 degrees |
| Engine | |
|---|---|
| Engine Make | Cummins |
| Engine Model | QSB6.7 |
| Engine Type | Diesel engine, direct injection w/turbocharger and air cooled intercooler |
| Gross Horsepower | 200 HP |
| Net Horsepower | 194 HP |
| Cooling | Water-cooled Module type: Hydraulic-driven, suction-type fan, pressurized radiator |
| Bore x Stroke | 4.2” x 4.9” |
| Displacement | 408.2 in³ |
| Speed - Foreward | 1st: 3.85 mph 2nd: 6.6 mph 3rd: 9.9 mph 4th: 25.0 mph 5th: 22.4 mph |
| Speed - Reverse | 1st: 3.85 mph 2nd: 6.6 mph 3rd: 9.9 mph 4th: 25.0 mph 5th: 22.4 mph |
| Gears | Reduction & differential: Two-stage reduction with limited slip differential Final Reduction: Inboard mounted, heavy duty planetary gear |
| Air Cleaner | Dry type (double element) |
| Fuel Type | #2 Diesel (Requires ultra-low sulfur fuel) |
| Fuel Tank Capacity | 67.4 gal |
| Starter | DC 24V-10.6 HP |
| Battery | DC 12V-1,000 CCA, 2 units |
| Alternator | DC 24V-65A |
| Governor | All speed electrical type |
| Rated RPM | 1600 RPM |
| Aspiration | Turbocharger and intercooled |
| Cycles | 4 |
| Torque Converter | 3-element, single-stage, 1-phase |
| Drivetrain | |
|---|---|
| Axles | Semi-floating type |
| Transmission Type | Countershaft type, Full power shift |
| Torque | 929 NM at 1 500 min |
| Drive System | Four-wheel drive system |
| Brakes | Service: Inboard mounted fully hydraulic 4-wheel wet disc brake. Front and rear independent brake circuit Parking/Emergency: Spring-applied, hydraulically-released, dry disc type with external output shaft. Located on driveline |
| Tires | 23.5-25-20PR (L-3) Tubeless 23.5R25 (L-3) Radial |
| Hydraulic | |
|---|---|
| Pump | Electronically controlled, common rail type (Fuel Injection Pump) |
| Std Pump Flow | Main pump-72.6 gal/min at 2200 min Fan pump-16.5 gal/min at 2200 min |
| Hydraulic Cylinders | Lift (Boom): Two (2) double-acting piston type: 5.1” x 34.7” Tilt (Bucket): One (1) double-acting piston type: 6.496” x 20.078” Steering: Two (2) double-acting piston type: 2.8” x 17.4” |
| Number of Cylinders | 6 |
| Hydraulic Cycle Time | Front end loading, Z bar linkage system Lifting time (at full load): 5.9 seconds (Normal Mode); 5.6 seconds (Power Mode) Lowering time (empty): 3.3 seconds Bucket Dumping Time: 1.6 seconds (Normal Mode); 1.5 seconds (Power Mode) Total: 10.8 seconds (Normal Mode); 10.4 seconds (Power Mode) |
| Hydraulic Pressure | Main Pump (serve as steering pump): 27.4 MPa Fan Pump: 18.2 MPa |
| Relief Valve Setting | 3974 PSI |
| Hydraulic Pump | Main Oil: 710 PSI Pilot Oil: 570 PSI |
| Operational | |
|---|---|
| Bucket Width | 9.6’ |
| Dig Depth | 4”-7” |
| Bucket Capacity | 4.2-4.7 yd3 |
| Height to Bucket Pin | 17’10” (Standard Arm) 19’2” (High Lift Arm) |
| Dump Reach | 3’8” (Standard Arm) 4’3” (High Lift Arm) |
| Steering | Articulated frame steering Mechanism: Hydraulic power steering unit, pilot operated type |
| Travel Speed - Forward | 1st: 3.9 MPH (Normal Mode); 4.0 MPH (Power Mode) 2nd: 6.6 MPH (Normal Mode); 6.9 MPH (Power Mode) 3rd: 9.9 MPH (Normal Mode); 10.4 MPH (Power Mode) 4th: 14.8 MPH (Normal Mode); 15.5 MPH (Power Mode) 5th: 22.4 MPH |
| Travel Speed - Reverse | 1ST: 4.0 MPH (Normal Mode); 4.2 MPH (Power Mode) 2nd: 6.9 MPH (Normal Mode); 7.3 MPH (Power Mode) 3rd: 15.5 MPH (Normal Mode); 16.3 MPH (Power Mode) |
| Max. Reach | Standard arm General Purpose Bolt on Cutting Edge: 3.8’ Standard arm General Purpose Teeth and Segments: 4.0’ Standard arm Material Handling Bolt on Cutting Edge: 3.1’ High lift arm Material Handling Bolt on Cutting Edge: 4.2’ |
| Breakout Force | 34,171 lbs. (Standard Arm) 31,248 lbs. (High Lift Arm) |
| Oscillation | Angle: Total 24 (+12,-12)° |
| Rollback Angle | 50 deg |
| Dump Clearance | 9’3”-10’10” |
| Hinge Pin Height | 13’5”-14’9” |
| Clearance Circle | 22’10” (Standard Arm) 23’6” (High Lift Arm) |
| Bucket Tilt | 43-44 deg (at ground position) |
| Static Tipping Load | 32,849 lbs. (Standard Arm) 26,191 lbs. (High Lift Arm) |
ENGINE
POWERTRAIN
HYDRAULIC SYSTEM
ELECTRICAL
CAB
OTHERS
ALARMS, GAUGES, INDICATORS
OPTIONAL EQUIPMENT
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
