New Hitachi ZW160-7 Loader for Sale
EASY CONTROL. ENHANCED PERFORMANCE.
An easy-to-use hydrostatic transmission and larger cab with seat-mounted armrests that include ergononic electric hydraulic controls put you in command for increased productivity.
| Dimensions | |
|---|---|
| Wheelbase | 9‘10” |
| Ground Clearance | 1’5” |
| Turning Radius | 16’8” (centerline of outside tire) 9’5” (inside of tires) |
| Overall Length | 25’2”-26’9” Wo/bucket: 21’1”-22’8” |
| Overall Height | 10’9” |
| Operating Weight | 28,467-29,983 lbs. |
| Steering Angle | Each direction 40°; total 80° |
| Rear Axle | Trunnion support |
| Final Drive | Heavy-duty planetary, mounted inboard |
| Reach | 3’4”-4’5” |
| Width over Tires | 8’2” |
| Tire Size | 20.5 R25 (L3) |
| Tread | 6’4” |
| Loader Clearance Radius | 19’6”-20’ (bucket in carry position) |
| Steering Type | Articulated frame steering |
| Height of Bucket Pin | 1’3” at carry position |
| Engine | |
|---|---|
| Engine Make | Cummins |
| Engine Model | B4.5 |
| Engine Type | Air-cooled, Direct injection |
| Cylinders | Double-acting piston type |
| Net Horsepower | 169 HP |
| Bore x Stroke | 4.2” x 4.9” |
| Air Cleaner | Two element dry type with restriction indicator |
| Battery | 2 x 12 V |
| Aspiration | Turbocharger and intercooled |
| Cycles | 4 |
| Piston Displacement | 273.4 cu. in. |
| After-Treatment | DPF+SCR system |
| Travel Speed | (Forward/Reverse) 1st: 8.1/8.1 mph 2nd: 8.1/8.1 mph 3rd: 12.4/12.4 mph 4th: 24.2/24.2 mph |
| Cooling Method | Forced circulation type |
| Drivetrain | |
|---|---|
| Axles | Semi-floating |
| Transmission | Electrical-controlled 2 motor hydrostatic transmission with summation gear box. Gear box: Fixed gear ratio, powershift countershaft type |
| Torque | 755 Nm |
| Drive System | Four-wheel drive system |
| Brakes | Service: Inboard mounted fully hydraulic 4 wheel wet disc brakes. Front and rear independent brake circuit, HST (Hydr Static Transmission) system provides additional hydraulic braking capacity Parking: Spring applied, hydraulically released, wet disc type |
| Hydraulic | |
|---|---|
| Hydraulic System | Arm & bucket are controlled by multifunction lever Arm controls: Four position valve; Raise, hold, lower, float Bucket Controls w/automatic bucket return-to-dig control Three position valve; Roll back, hold, dump |
| Hydraulic Cylinders | Double acting type |
| Number of Cylinders | 4 |
| Hydraulic Cycle Time | Lift arm raise: 6.4 seconds Lift arm lower: 3.8 seconds Bucket Dump: 1.6 seconds Total: 11.8 seconds |
| Hydraulic Filter | Full-flow 10 micron return filter in reservoir |
| Hydraulic Bore x Stroke | Arm: 2 x 4.9” x 30” Bucket: 1 x 5.9 x 19.5” |
| Operational | |
|---|---|
| Bucket Width | 8’4” |
| Dig Depth | 0’3”-0’9” |
| Bucket Capacity | Heaped: 2.6-4.7 yd³ Struck: 2.1-2.6 yd³ |
| Height to Bucket Pin | 12’7”-13’10” (hinge fully raised) |
| Front Axle | Fixed to the front frame |
| Flow | Main Pump: 51.2 gallons Brake and fan and pilot oil Pump: 11.9 gallons |
| Breakout Force | 22,311 lbf |
| Oscillation Angle | Total 20° (+10°, -10°) |
| Pump Type | Main & Brake/fan/pilot oil Pump: Gear type |
| Rollback Angle | Carry Position: 46°-47° Ground Level: 43°-45° Full Height: 54°-59° |
| Dump Clearance | 8’6”-12’11” |
| Static Tipping Load | Straight: 18,387-23,391 lbs. Full Turn: 15,851-20,305 lbs. |
| Operating Height | 16’6”-17’9” |
| Steering Bore x Stroke | 2 x 2.6” x 16.5” (No. Bore x Stroke) |
| Pressure | Main Pump: 2989 PSI Brake and fan and pilot oil Pump: 2248 PSI |
| Lift Arm Clearance | 11’8”-12’11” |
| Reduction and Differential Gear | Two stage reduction with limited slip differential |
ENGINE
BRAKE SYSTEM
HYDRAULIC SYSTEM
CAB
MONITORING SYSTEM
ELECTRICAL SYSTEM
LIGHTS
TIRES
MISCELLANEOUS
POWER TRAIN
ENGINE
CAB
LIGHTS
MISCELLANEOUS
POWER TRAIN
