Allmand Night-Lite GR-Series Chain

New Allmand Light Tower for Rent

New Allmand Night-Lite GR-Series Chain Light Tower for Rental

Simpler, lighter, and lower cost, the Night-Lite™ GR-Series Chain towable light towers are the most easily deployed and easy-to-maneuver units in its class. Flexibility in power is inherent with this unit allowing for any power source with 15 amp or 20 amp connections to illuminate a jobsite. To increase the impact of the Night-Lite™ GR-Series Chain light tower, the ability to daisy chain units is a built-in feature. Four LED light fixtures with 147,344 total lumens lighting will provide plenty of brightness for any space. This unit saves money immediately with the size capability to ship 20 units on a truck.

Body
Frame Formed welded steel design
Axles Tubular design w/1.5”-2” camber
Tire Inflation Pressure 36 PSI (cold)
Light Tower Structure Four-section tubular steel design
Dimensions
Width 4 (packaged)
7’10” (outriggers deployed)
Height 23’ (tower fully elevated)
Gross Vehicle Wt Rating (GVWR) 1,200 lbs.
Transport Length 9’6” (towing)
Transport Height 8’2”
Transport Width 4’¼” (towing)
Gross Axle Wt Rating (GAWR) 2200 lbs.
Shipping Weight 835 lbs.
Operating Length 6.4’
Engine
Engine Speed 20 MPH Off-Road
65 MPH On-Road
Power Consumption 250 W per Fixture
Operational
Voltage 60 HZ – 120/50 Hz – 220
Amps 60 Hz – 16.7/50 Hz – 15
Tires ST175/80R13 Load Range ‘C’
Frequency 60 Hz/50 Hz
Mast Height 8.2” (lowered in)
23” (raised in)
Lumens 36,836 (per lamp)
147,344 total
Shipping 20 units on a 48’ flatbed trailer 22 units on a 53’ flatbed trailer
Light Tower Actuation Standard – Manual winch
Tower Rotation Complete tower rotates 345°

  • Mast: Flexible lighting with a vertical mast extending to 23 feet and can rotate 359 degrees.
  • Compact Design: Fit 20 units on a 48 ft flatbed, 22 units on a 53 ft flatbed more units for the same shipping cost
  • Foldable Tongue: Takes up less space on the job-site and in your yard
  • Heavy-duty Leveling Jacks
  • Vertical Tower: Is easy to raise and lower with a dual‑handle manual winch
  • Controls: Simple, easy to use
  • Easy Access: Wide area rear door for ease of access maintenance
  • CSA Approved
  • SMD Style LEDs
  • Forklift Pockets: Easily load and unload equipment
  • Lifting Eye
  • 359 Degree Rotation: Increase flexibility in light spread
  • Standard Trailer Coupler 2” Ball
  • Stabilizers: Steel tongue jack foldable with dual pins, 3 point outriggers
  • Chaining Capability: Up to two units off a single power source
  • 15amp Connector
  • 20amp Connector
  • Welded Steel Frame With Lockable Door
  • Removable Storage Box: Cord and other tool storage
  • Space For Inverter:
  • Remove storage box for space to store a power source on the unit Timer – programmable on/off functionality
  • Photocell: Dawn to dust on/off functionality
  • (4) LED Light Fixtures 250W Each lamp

Request A Quote

All machines are not available at all locations.

View Brochure

Main Technical Specifications
MAKE Allmand
MODEL Night-Lite GR-Series Chain

Allmand Night-Lite GR-Series Chain

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Allmand Night-Lite GR-Series Chain Light Tower for Rental

Simpler, lighter, and lower cost, the Night-Lite™ GR-Series Chain towable light towers are the most easily deployed and easy-to-maneuver units in its class. Flexibility in power is inherent with this unit allowing for any power source with 15 amp or 20 amp connections to illuminate a jobsite. To increase the impact of the Night-Lite™ GR-Series Chain light tower, the ability to daisy chain units is a built-in feature. Four LED light fixtures with 147,344 total lumens lighting will provide plenty of brightness for any space. This unit saves money immediately with the size capability to ship 20 units on a truck.
GENERAL INFORMATION
Manufacturer
Allmand
Model Year
Model
Night-Lite GR-Series Chain
Condition
NEW
Body
Frame
Formed welded steel design
Axles
Tubular design w/1.5”-2” camber
Tire Inflation Pressure
36 PSI (cold)
Light Tower Structure
Four-section tubular steel design
Dimensions
Width
4 (packaged) 7’10” (outriggers deployed)
Height
23’ (tower fully elevated)
Gross Vehicle Wt Rating (GVWR)
1,200 lbs.
Transport Length
9’6” (towing)
Transport Height
8’2”
Transport Width
4’¼” (towing)
Gross Axle Wt Rating (GAWR)
2200 lbs.
Shipping Weight
835 lbs.
Operating Length
6.4’
Engine
Engine Speed
20 MPH Off-Road 65 MPH On-Road
Power Consumption
250 W per Fixture
Operational
Voltage
60 HZ – 120/50 Hz – 220
Amps
60 Hz – 16.7/50 Hz – 15
Tires
ST175/80R13 Load Range ‘C’
Frequency
60 Hz/50 Hz
Mast Height
8.2” (lowered in) 23” (raised in)
Lumens
36,836 (per lamp) 147,344 total
Shipping
20 units on a 48’ flatbed trailer 22 units on a 53’ flatbed trailer
Light Tower Actuation
Standard – Manual winch
Tower Rotation
Complete tower rotates 345°

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
All machines are not available at all locations.