Komatsu XT430-5

Komatsu XT430-5 Tracked Feller Buncher/Harvester for Sale

This is available as both Tracked Feller Buncher & Tracked Harvester

Tracked Feller Buncher

Your production partner

Our goal is for you to be most productive, even in the tightest felling areas. That is where the XT430-5 tracked feller buncher’s small, light footprint and smart design is most efficient. The state-of-the-art cab and controls ensure your ultimate comfort and efficiency while enhanced servicing features minimize maintenance downtime.

• Significantly greater lift capacity at full reach*
• 10% more horsepower/16% more torque/5% lower fuel consumption*
• Maximized uptime with optimized serviceability + Komtrax + Komatsu Care

Features and Benefits

• Outstanding serviceability: Gull-wing engine hood folds down for easy access to all engine service points, and doubles as an elevated work platform. Four additional swing-out doors open wide to provide easy servicing of all key components. All major service points can be easily and quickly accessed.
• Exceptional maneuverability and multifunctioning: Easily work through dense forests with a short-tail swing. Cut close to the tracks with the proven set-back boom design. Powerful swing torque for demanding applications. Closed-loop track drive with dedicated pumps allows simultaneous operation of travel, swing, boom and tools for increased productivity.
• Increased lift capacity: Due to refined boom and arm geometry, significantly greater lift capacity is achieved at full reach vs. previous models. Plus, this machine has excellent balance between boom lift and arm holding capacity. Can be equipped with a wide selection of Quadco high-speed disc saws.
• Engineered modern forestry cab: Excellent comfort and visibility for total operator capability all day long. Positioned on the left side with superior visibility, especially of the tracks. Sloped roofline adds headroom for the operator. High-capacity automatic air conditioner, heater and defroster. Premium optional seat is ergonomic and heated/cooled.
• Customizable operator controls: Advanced IQAN-MD4 digital control system enables customized control patterns and rates for up to three different operators. Helps to ensure precision and maximize multioperator productivity.
• Rugged undercarriage: Using Komatsu engineering expertise, the tough and robust undercarriage provides significantly longer service life and day-to-day reliability.
• Powerful, fuel-efficient engine: Get more done with the powerful and efficient Cummins QSL9 engine. 10% more horsepower; 16% more torque; up to 5% lower fuel consumption compared to XT-3 models. EPA Tier 4 final emissions certified.
• Hydraulic protection: Robust forestry-specific guarding system covers the boom/arm/rear hydraulic tubes and hoses to help protect them from productivity-robbing operational hazards and debris.
• Quadco high-speed disc saws: Can be factory-equipped with a broad selection of the legendary Quadco high-speed disc saws.
• Reduced hydraulic oil needs: Innovative new hydraulic tank system design requires 55% less hydraulic oil compared to the XT-3 models which lowers your maintenance costs.
• Standard Komtrax: Easily monitor vehicle usage insights that can boost productivity and aid in controlling cost with our standard telematics system. Monitors and records data such as location, operation map and fuel consumption. Notifies you when maintenance is due and helps keep your machine running at peak performance.
• Komatsu Care: Every new Komatsu XT-5 is covered by our Komatsu Care maintenance program, so you can keep your machine producing at its best. For the first three years or 2,000 hours (whichever occurs first) we take care of most regular service, inspection, filter and fluid replacement, and labor – at your location, and using only genuine Komatsu fluids and filters.

Tracked Harvester

Designed to optimize productivity

You need high productivity and minimal downtime in even the tightest harvesting areas. That’s what the XT430-5 tracked harvester is designed to do, with its small footprint, smart design and enhanced servicing features. Operators benefit from a state-of-the-art cab and controls.

• Significantly greater lift capacity*
• 10% more horsepower/16% more torque*
• 5% lower fuel consumption*
• Excellent uptime and serviceability

Features and Benefits

• Helps reduce servicing downtime: The faster you can service your machines, the faster they can get back to work. Komatsu’s engine gull-wing and wide swing-out doors offer quick and easy access to all engine service points and all key components.
• Equipped to multi-task: Closed-loop system allows operators to simultaneously travel, cut, delimb, harvest and swing timber — all in one powerful and agile machine. Engineered with hydraulic lines for each function, driving performance while helping to prevent machine damage.
• Maneuvers in dense terrain: Work better through dense forests and clear-cutting environments with a short-tail swing design. Cut close to the undercarriage and tracks with set-back boom engineering. Powerful swing torque for demanding applications.
• Better lift capacity: Handling trees with the arm fully extended is even easier with a design that significantly increases lift capacity compared to previous models. Excellent balance between boom lift and arm holding capacity. Can be equipped with a wide selection of harvesting saw heads.
• Designed for operator comfort: Help reduce fatigue and support productivity by giving your operators a roomy, comfortable work environment. Features include superior visibility - especially to the tracks - and provides powerful heating, cooling and defrosting systems.
• Customizable for each operator: When working shifts switch, the controls can be swapped by adjusting to each operator’s preference (up to three setting) to help maximize productivity. Set preferences for joystick, boom, stick, tool tilt, swing, cab leveling and more.
• Adapts to long or short reach: Adapt your equipment to the job with two different working ranges. Use the short reach and larger-scaled head when the job demands it. Switch to a longer reach and more compact designed head when working in restricted spaces.
• Powerful and fuel-efficient: Get more done with the powerful and efficient Cummins QSL9 engine that delivers more horsepower and torque while using less fuel consumption compared to XT-3 models. EPA Tier 4 final emissions certified.
• Stands up to debris: Forestry conditions pose debris hazards that can slow operations and reduce productivity. Komatsu’s harvesters help minimize that risk with various design specific forestry guarding.
• Promoting stability on slopes: Operators can work with confidence even on sloped terrains. A heavy-duty, four-way leveling system promotes front/rear/side leveling for exceptional stability. The fuel tank placement lowers the center gravity to offer even more enhanced stability.
• Designed to meet your job demands: Forestry harvesting demands vary widely, so Komatsu tracked harvesters are designed to adapt. You can factory-equip your machine with a broad selection of harvesting saw heads — to match the type of performance your job sites require.
• Promote lower maintenance costs: Save on maintenance costs with an innovative hydraulic tank system design that requires 55% less hydraulic oil compared to the XT-3 models. Plus, pumps are equipped with hydro-nucleation to help prevent pump cavitation and are 17% larger* to help extend component life by operating 500 rpms slower. *17% larger than the XT-3.

Models

• XT430-5 Tracked Feller Buncher
• XT430-5 Tracked Harvester

• Alternator, 100 ampere, 24V
• Air cleaner, dry type with air intake pre-cleaner
• Auto-idle shutdown system
• Automatic air conditioner, heater & defroster with pressurization and 6 adjustable vents
• Batteries, 2 x 12V, 1000 AH
• Cab, ROPS/OPS/FOPS/TOPS/FOG/WCB/Oregon OSHA certified forestry:
  • 2 x 12V power outlets
  • Cellphone holder
  • Coat hook, magnetic and moveable base
  • Cupholder, fold-down/up
  • Literature box with cover
  • Lockable door
  • Insulated drink bottle & lunch box cooler
  • Ventilation fan
• Carbody, wide gauge with storage trunk
• Continuous swing rotation
• Control handles, Sure Grip
• Cooling:
  • Engine temperature-sensing auto-reversing fan
  • Hydraulic oil cooler temperature-sensing auto-reversing fan
  • Charge air cooler temperature-sensing auto-reversing fan
• Electrical system master disconnect switch
• Electrical joystick/foot pedal controls
• Emergency escapes, 3 (front window, side door and roof hatch)
• Engine, Cummins QSL9, 9 Liter, 331 HP Peak @ 1600 rpm
• Engine compartment service light
• Engine interface monitoring system
• Final drives, Komatsu with spring-applied oil released track brakes
• Fire extinguisher, 10 lb. handheld
• Fuel water separator
• Heater, charge oil relief
• Horn, electric
• Hydraulic system, load sensing
• Hydraulic tank oil refill pump, 24V
• Hydraulic tank vacuum pump
• Instrument panel with switches, dials, LED warning lights, and engine stop button
• IQANMD4 Digital Control System with 7” LED color touch screen display
• KOMTRAX monitoring system
• Leveling, 4way HD cab leveling (XT445L5/XT465L5)
• Light, interior dome LED
• Muffler with blanket
• Operator Identification System
• Premium seat, vented and heated
• Pumps:
  • Attachment, 1 x VDPP, 53 gpm
  • Implement, 1 x VDPP, 86 gpm
  • Saw drive, 1 x VDPP, 38 gpm
  • Track drive, 2 x VDPP, 44 gpm each
  • Fan, 2 x Gear, 11 gpm each
  • Charge, 1 x Gear, 25 gpm
• Radio AM/FM Weather Band stereo with iPod/MP3 input jack
• Rear view monitoring system (1 camera)
• Rubber debris skirt
• Seat, adjustable high back suspension
• Seat belt, 3" retractable
• Swing bearing, HD 22bolt single row (XT4305/XT445L5)
• Swing bearing HD 37bolt double row (XT465L5)
• Swing motor, 56cc
• Track adjusters, hydraulic
• Track chain, grease sealed Komatsu 8.5" pitch
• Track drive, closed loop
• Track motors, 2-speed VDPP auto-shift with variable speed control
• Track rollers
• Track shoes, 24" single grouser
• Track sliders
• Travel alarm
• Travel pedals
• Windows, polycarbonate
  • Front & skylight windows,1.25"
  • Left, right & rear windows, 0.5"
• Work lights, 13LED type

Tracked Feller Buncher

• Arms
  • Tracker feller buncher: 13' straight with tree deflector
• Booms
  • Feller buncher: 14' 10"
• Carrier rollers
  • Counterweight (rear): XT430-5: 2,645 lbs.
• Fire suppression system, automatic liquid chemical
• Heater, fuel-fired jacket water and hydraulic oil pre-heater
• Hydraulic systems
  • Bar saw, intermittent disc saw, combination disc/bar saw
  • Disc saw
  • Harvesting saw (XT430/XT445L-5)
  • Mulcher
• Oil cooler, pump drive
• Side camera (right)
• Track shoes
  • 28-inch single grouser
  • 28-inch double grouser (XT430-5/XT445L-5)
• Uptime spare parts kits
  • Base machine
  • Engine filters

Tracked Harvester

• Arms
  • Tracked harvester: 12'
  • Tracked harvester: 17' 7"
• Booms
  • Tracked harvester: 21 ft'
• Carrier rollers
  • Counterweight (rear): XT430-5: 2,645 lbs.
• Fire suppression system, automatic liquid chemical
• Heater, fuel-fired jacket water and hydraulic oil pre-heater
• Hydraulic systems
  • Bar saw, intermittent disc saw, combination disc/bar saw
  • Disc saw
  • Harvesting saw (XT430/XT445L-5)
  • Mulcher
• Oil cooler, pump drive
• Side camera (right)
• Track shoes
  • 28-inch single grouser
  • 28-inch double grouser (XT430-5/XT445L-5)
• Uptime spare parts kits
  • Base machine
  • Engine filters