Home > Rentals Home > Excavators > Komatsu

Komatsu PC210LC-11

Komatsu PC210LC-11

Request A Quote
View Brochure

Komatsu’s Comparison Tools

Main Technical Specifications
MAKE Komatsu
MODEL PC210LC-11

All machines are not available at all locations.

New Komatsu PC210LC-11 Excavator for Sale

Performance & Fuel Economy

New engine with up to 4% more horsepower and up to 6% better fuel consumption than the PC210LC-10.

  • KOMATSU AUTO IDLE SHUTDOWN: Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The countdown to engine shutdown can be easily programmed from 5 to 60 minutes.
  • FUEL CONSUMPTION: The Eco-gauge and new fuel consumption gauge are viewed on the right side of the color monitor and assist the operator in maintaining low fuel consumption and environment friendly operation.
    • Fuel Consumption: Reduced by up to 6% (vs PC210LC-10 Based on typical work pattern Collected via KOMTRAX)
    • This fuel consumption data is the result of using a prototype machine. 
  • HIGH RIGIDITY WORK EQUIPMENT: Booms and arms are constructed with thick plates of high tensile strength steel. In addition, these structures are designed with large cross sectional areas and large one piece castings in the boom foot, the boom tip, and the arm tip. The result is work equipment that exhibits long term durability and high resistance to bending and torsional stress. A standard HD boom design provides increased strength and reliability.
  • SWITCHABLE DISPLAY MODES: The main screen display mode can be changed by pressing the F3 key.
  • CENTRALIZED ENGINE CHECK POINTS: Locations of the engine oil check and filters are integrated into one side to allow easy maintenance and service.
  • REAR VIEW MONITORING SYSTEM: A new rear view monitoring system display has a rear view camera image that is continuously displayed together with the gauges and important vehicle information. This enables the operator to carry out work while easily checking the surrounding area.

 

  • This is available with a Super Long Front

Body
Frame Center: X-Frame
Track: Box-section
Steering Two levers with pedals
Dimensions
Length 31 ft. 10 in. (9,705 mm)
Width 10 ft. 1 in. (3,080 mm)
Height 10 ft. (3,045 mm) top of cab
10 ft. 3 in. (3,135 mm) top of handrail
Weight 51,397 - 53,882 lbs. (24,160 - 24,440 kg) operating
55,029-55,646 lbs. (Super Long Front Operating)
Ground Clearance 3 ft. 7 in. ( 1,085 mm) counterweight
1 ft. 5 in. (440 mm) minimum
Fuel Tank Capacity 105.7 gal. (400 l)
Engine
Engine Make Komatsu
Engine Model SAA6D107E-3
Engine Type Water-cooled, 4-cycle, direct injection
Cylinders 6
Horsepower 165 @ 2000 rpm
Net Horsepower 164.6 hp (122.8 kW) @ 2,000 rpm
Cooling Water-cooled
Bore x Stroke 4.21 x 4.88 in. (107 x 124 mm)
Displacement 408 cu. in. (6.69 l)
Fuel Type Diesel
Rated Speed 3.4 mph (5.5 km/h) high
2.5 mph (4.1 km/h) mid
1.9 mph (3 km/h) low
Governor All-speed control, electronic
Rated RPM 2000
Aspiration Komatsu Variable Geometry Turbocharged, aftercooled, cooled EGR
Piston Displacement 408 in³
DEF Tank Capacity 6.1U.S. gal
Drivetrain
Number of Speeds 3
Track Width 28 in. (700 mm) shoes
Brakes Service brake: Hydraulic lock
Parking brake: Mechanical disc brake
Gradeability 70%, 35°
Track Length 14 ft. 7 in. (4,450 mm)
12’ (on ground)
Drawbar Pull 45,349 lbf
Track Type Sealed track
Track Rollers 9 each side
Ground Pressure 5.9-6.7 PSI
Carrier Rollers 2 each side
Track Adjuster Hydraulic
Hydraulic
Pump Variable displacement piston type
5 Pumps: Boom, arm, bucket swing, travel circuits
Std Pump Flow 125.5 gpm (475 lpm)
Hydraulic Tank Capacity 34.9 gal. (132 l)
Hydraulic Cylinders 2 - 5.1 x 52.5 x 3.5 in. (130 x 1,333 x 89 mm) boom
1 - 5.3 x 58.7 x 3.7 in. (135 x 1,491 x 94 mm) arm
1 - 4.5 x 44.1 x 3.2 in. (114 x 1,120 x 81 mm) bucket
Relief Valve Setting Implement circuits: 5,400 psi
Travel circuit: 5,400 psi
Swing circuits: 4,190 psi
Pilot circuit: 470 psi
Hydraulic Working Modes 6
Hydraulic Motors Travel: 2 x axial piston motor with parking brake
Swing: 1 x axial piston motor with swing holding brake
Hydraulics HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve
Operational
Dig Depth 21 ft. 9 in. (6,620 mm)
Dig Height 32 ft. 9 in. (10,000 mm)
Arm Length 9 ft. 7 in. (2,925 mm)
Bucket Reach 32 ft. 5 in. (9,875 mm) digging
Bucket Digging Force 29,762 lbs. (13,500 kg)
Dump Height 23’4”
Bucket Capacity 0.66 – 1.57 yd³
0.6 yd³ (Super Long Front)
Boom Length 18 ft. 8 in. (5,691 mm)
Tail Swing Radius 9 ft. 11 in. (2,947 mm)
Swing Torque 49,907 ft lbs
Swing Speed 12.4 rpm
Shoes 49 each side
Track Gauge 7’10”
Swing Reduction Planetary gear
Swing Circle Lubrication Grease-bathed
Swing Lock Mechanical disc brake
Drive Method Hydrostatic
Digging Reach 32’5”
31’10” (at ground level)

  • 3 Speed travel with Auto shift
  • Alternator, 60 Ampere, 24V
  • AM/FM radio
  • Automatic engine warm-up system
  • Automatic air conditioner/heater
  • Auto idle
  • Auto Idle Shutdown (programmable)
  • Auxiliary input (3.5 mm jack)
  • Batteries, large capacity
  • Battery disconnect switch
  • Boom and arm holding valves
  • Converter, (2) x 12V
  • Counterweight, 4370 kg 9,634 lb
  • Dry type air cleaner, double element
  • Electric horn
  • EMMS monitoring system
  • Engine, Komatsu SAA6D107E-3
  • Extended work equipment grease interval
  • Fan guard structure
  • Fuel system pre-cleaner 10 micron
  • High back air suspension seat, with heat 
  • Hydraulic track adjusters
  • KOMTRAX® Level 5.0
  • Large LCD color monitor, high resolution
  • Lock lever
  • Mirrors, (LH and RH)
  • Operator Protective Top Guard (OPG), Level 1
  • Operator Identification System
  • Pattern change valve (ISO to BH control)
  • Power maximizing system
  • PPC hydraulic control system
  • Pump/engine room partition cover
  • Radiator and oil cooler dustproof net
  • Rear reflectors
  • Rearview monitoring system (1 camera)
  • Revolving frame deck guard
  • Revolving frame undercovers
  • ROPS cab
  • Seat belt, retractable, 76 mm 3"
  • Seat belt indicator
  • Secondary engine shutoff switch
  • Service valve
  • Shoes, triple grouser, 800 mm 31.5"
  • Skylight
  • Slip resistant foot plates
  • Starter motor, 5.5kW/24V x 1
  • Suction fan
  • Thermal and fan guards
  • Track frame undercover
  • Track frame swivel guard
  • Travel alarm
  • Working lights, 2 (boom and RH front)
  • Working mode selection system

  • Additional front working lights, 2 cab roof lights
  • Arms 
    • ​2925 mm 9'7" HD arm assembly
    • 2925 mm 9'7" HD arm assembly with piping
  • Booms 
    • ​5700 mm 18'8" boom assembly
    • 5700 mm 18'8" HD boom assembly with piping
  • Cab guards 
    • Full front guard, OPG Level 1
    • Full front guard, OPG Level 2
    • Bolt-on top guard, OPG Level 2
  • High pressure in-line hydraulic filters
  • Hydraulic control unit, 1 actuator
  • Komvision
  • Rain visor
  • Revolving frame undercovers, heavy duty
  • Shoes, triple grouser, 700 mm 28"
  • Straight travel pedal
  • Sun visor
  • Track roller guards, full length

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

Komatsu PC210LC-11

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Komatsu PC210LC-11 Excavator for Sale

Performance & Fuel Economy

New engine with up to 4% more horsepower and up to 6% better fuel consumption than the PC210LC-10.

  • KOMATSU AUTO IDLE SHUTDOWN: Komatsu auto idle shutdown automatically shuts the engine down after idling for a set period of time to reduce unnecessary fuel consumption and exhaust emissions. The countdown to engine shutdown can be easily programmed from 5 to 60 minutes.
  • FUEL CONSUMPTION: The Eco-gauge and new fuel consumption gauge are viewed on the right side of the color monitor and assist the operator in maintaining low fuel consumption and environment friendly operation.
    • Fuel Consumption: Reduced by up to 6% (vs PC210LC-10 Based on typical work pattern Collected via KOMTRAX)
    • This fuel consumption data is the result of using a prototype machine. 
  • HIGH RIGIDITY WORK EQUIPMENT: Booms and arms are constructed with thick plates of high tensile strength steel. In addition, these structures are designed with large cross sectional areas and large one piece castings in the boom foot, the boom tip, and the arm tip. The result is work equipment that exhibits long term durability and high resistance to bending and torsional stress. A standard HD boom design provides increased strength and reliability.
  • SWITCHABLE DISPLAY MODES: The main screen display mode can be changed by pressing the F3 key.
  • CENTRALIZED ENGINE CHECK POINTS: Locations of the engine oil check and filters are integrated into one side to allow easy maintenance and service.
  • REAR VIEW MONITORING SYSTEM: A new rear view monitoring system display has a rear view camera image that is continuously displayed together with the gauges and important vehicle information. This enables the operator to carry out work while easily checking the surrounding area.

 

  • This is available with a Super Long Front
GENERAL INFORMATION
Manufacturer
Komatsu
Model Year
Model
PC210LC-11
Condition
NEW
Body
Frame
Center: X-Frame Track: Box-section
Steering
Two levers with pedals
Dimensions
Length
31 ft. 10 in. (9,705 mm)
Width
10 ft. 1 in. (3,080 mm)
Height
10 ft. (3,045 mm) top of cab 10 ft. 3 in. (3,135 mm) top of handrail
Weight
51,397 - 53,882 lbs. (24,160 - 24,440 kg) operating 55,029-55,646 lbs. (Super Long Front Operating)
Ground Clearance
3 ft. 7 in. ( 1,085 mm) counterweight 1 ft. 5 in. (440 mm) minimum
Fuel Tank Capacity
105.7 gal. (400 l)
Engine
Engine Make
Komatsu
Engine Model
SAA6D107E-3
Engine Type
Water-cooled, 4-cycle, direct injection
Cylinders
6
Horsepower
165 @ 2000 rpm
Net Horsepower
164.6 hp (122.8 kW) @ 2,000 rpm
Cooling
Water-cooled
Bore x Stroke
4.21 x 4.88 in. (107 x 124 mm)
Displacement
408 cu. in. (6.69 l)
Fuel Type
Diesel
Rated Speed
3.4 mph (5.5 km/h) high 2.5 mph (4.1 km/h) mid 1.9 mph (3 km/h) low
Governor
All-speed control, electronic
Rated RPM
2000
Aspiration
Komatsu Variable Geometry Turbocharged, aftercooled, cooled EGR
Piston Displacement
408 in³
DEF Tank Capacity
6.1U.S. gal
Drivetrain
Number of Speeds
3
Track Width
28 in. (700 mm) shoes
Brakes
Service brake: Hydraulic lock Parking brake: Mechanical disc brake
Gradeability
70%, 35°
Track Length
14 ft. 7 in. (4,450 mm) 12’ (on ground)
Drawbar Pull
45,349 lbf
Track Type
Sealed track
Track Rollers
9 each side
Ground Pressure
5.9-6.7 PSI
Carrier Rollers
2 each side
Track Adjuster
Hydraulic
Hydraulic
Pump
Variable displacement piston type 5 Pumps: Boom, arm, bucket swing, travel circuits
Std Pump Flow
125.5 gpm (475 lpm)
Hydraulic Tank Capacity
34.9 gal. (132 l)
Hydraulic Cylinders
2 - 5.1 x 52.5 x 3.5 in. (130 x 1,333 x 89 mm) boom 1 - 5.3 x 58.7 x 3.7 in. (135 x 1,491 x 94 mm) arm 1 - 4.5 x 44.1 x 3.2 in. (114 x 1,120 x 81 mm) bucket
Relief Valve Setting
Implement circuits: 5,400 psi Travel circuit: 5,400 psi Swing circuits: 4,190 psi Pilot circuit: 470 psi
Hydraulic Working Modes
6
Hydraulic Motors
Travel: 2 x axial piston motor with parking brake Swing: 1 x axial piston motor with swing holding brake
Hydraulics
HydrauMind (Hydraulic Mechanical Intelligence) system, closed-center system with load sensing valve and pressure compensated valve
Operational
Dig Depth
21 ft. 9 in. (6,620 mm)
Dig Height
32 ft. 9 in. (10,000 mm)
Arm Length
9 ft. 7 in. (2,925 mm)
Bucket Reach
32 ft. 5 in. (9,875 mm) digging
Bucket Digging Force
29,762 lbs. (13,500 kg)
Dump Height
23’4”
Bucket Capacity
0.66 – 1.57 yd³ 0.6 yd³ (Super Long Front)
Boom Length
18 ft. 8 in. (5,691 mm)
Tail Swing Radius
9 ft. 11 in. (2,947 mm)
Swing Torque
49,907 ft lbs
Swing Speed
12.4 rpm
Shoes
49 each side
Track Gauge
7’10”
Swing Reduction
Planetary gear
Swing Circle Lubrication
Grease-bathed
Swing Lock
Mechanical disc brake
Drive Method
Hydrostatic
Digging Reach
32’5” 31’10” (at ground level)

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
All machines are not available at all locations.