Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
New Broderson IC-400 Carry Deck Crane for Sale Broderson’s longest reach and highest capacity carry deck crane, the IC-400 provides heavy duty capacity to take care of all your long reach light and heavy duty lifting needs. |
Body | |
---|---|
Chassis | CARGO DECK: Total Deck Area: 74 sq. ft.(6.94 m²) of deck area. 25,000 lbs. (11,340 kg) capacity on deck when load is centered over or between axles. Five deck stakes are provided along edge of deck for 1” (25mm) pipe stakes. Stakes furnished. Cargo decks have skid resistant coating. HEADLIGHT AND TAILLIGHT GRILLES: Steel protective grilles for headlights and taillights. Easily removable for replacing bulbs. OUTRIGGERS: Four hydraulic out and down outriggers of box beam construction. Hydraulic cylinders are equipped with direct-connected holding valves. Outrigger pad dimensions: 11.5” (29 cm) x 11.5” (29 cm). ACCESSORY STORAGE BOX: One side deck compartment and one front deck compartment. LIFTING RINGS: Lifting rings at each corner of cargo deck so sling can be attached for lifting crane. Rings hang below surface when not in use. |
Cab | Consists of rigid mounted canopy section and removable hinged door with safety glass. Rugged canopy structure with laminated glass front and top. Door is equipped with a keyed lock to protect operator’s station. Includes defroster fan, dome light, heater with 2- speed fan and 12V electric windshield wiper and windshield washer, 12 volt power outlet. Emergency exit through rear window. |
Dimensions | |
---|---|
Length | 15’6” |
Width | 8 ft. 6 in. |
Height | 11’3” |
Weight | 54,900 lbs. 29,400 lbs. (Front Axle) 25,500 lbs. (Rear Axle) |
Turning Radius | 15’10” |
Capacity | 20,000 lbs. (Carry Deck) 25,000 lbs. (Pick and Carry) |
Horizontal Reach | 90’ (w/boom extension) |
Max Tip Height | 99’ |
Engine | |
---|---|
Engine Make | Cummins |
Engine Model | QSB4.5 (US EPA Tier 4F) |
Engine Type | Turbocharged-Diesel, charge air cooled |
Cylinders | 4 |
Horsepower | 163 HP |
Displacement | 4.5 l |
Fuel Tank Capacity | 80 Gallons |
Drivetrain | |
---|---|
Axles | FRONT: Planetary drive/steer front axle with 19:333 to 1.0 ratio. Differential equipped with “limited slip” feature. Front axle mounted rigidly to frame. REAR Planetary drive/steer axle with 19.333 to 1.0 ratio. Rear axle is rigid mounted. Axle has a 30% limited slip-differential. |
Transmission | POWERSHIFT TRANSMISSION with 6-speeds (2 range, 3 speeds/range) forward and reverse. Oil cooler and filter. Operator interface to shift and disconnect front axle for 2-wheel drive operation. 1st: 8.93 Forward/Reverse 2nd: 4.63 Forward/Reverse 3rd: 1.70 Forward/Reverse 4th: 3.75 Forward/Reverse 5th: 1.94 Forward/Reverse 6th: 0.71 Forward/Reverse |
Transmission Speeds | Forward- 1st: 2.1 MPH 2nd: 4.0 MPH 3rd: 10.5 MPH 4th: 4.9 MPH 5th: 9.2 MPH 6th: 23.6 MPH Reverse- 1st: 8.93 MPH 2nd: 4.63 MPH 3rd: 1.70 MPH 4th: 3.75 MPH 5th: 1.94 MPH 6th: 0.71 MPH |
Hydraulic | |
---|---|
Hydraulic Pump | TWO PISTON PUMPS mounted on and driven by the main transmission, delivers a combine flow of 103 GPM (390L / min) at 4,000 psi (275.8 bar) and 2600 engine rpm speed. System protected by relief valves, suction-line strainers, and a 150 gpm, 10-micron return-line filter. |
Operational | |
---|---|
Brakes | Service: 4-wheel hydraulic internal wet-disc brakes. Parking: Internal wet disc, spring applied and hydraulically released and integral to the rear axle. |
Tires | Standard: 17.5 x 25, 20-ply rating, mud lug. |
Steering | Hydraulic steering unit with one cylinder attached to each axle. Allows limited steering when engine is not running. A switch on the control panel is used to select rear-wheel steering, 4-wheel steering or crab steering. Electronic sensors and control box automatically align the steering after a new mode is selected. |
Gradeability | 70% |
Lift Capacity | 50,000 lbs. |
Outriggers Up Lift Capacity | 50,000 lbs. |
Boom | |
---|---|
Boom Extensions | 46’6” |
Max Boom Length | 68’ |
Max Tip Height-Boom | 64'6" |
Boom Rotation | 360° Continuous Heavy-duty ball bearing rotation gear with external teeth. Rotation is powered by hydraulic motor and worm gear drive. |
Boom Elevation | 0°-75° |
Boom Hoist | Turret Mounted/Hydraulic Powered Bare Drum Line Pull: 13,800 lbs. (6,520 kg) Wire Rope: 425 ft. (130 m) of 5/8” (16 mm) dia. Line Speed: sheave block for four-part line requirement. Downhaul weight and hook included — standard. |
Electrical | |
---|---|
Electrical System | LIGHTING PACKAGE: One pair headlights with high and low beams; tail, brake and turn signal lights and back-up lights in rear; turn signals and emergency flasher switch at operator’s station. INSTRUMENT PACKAGE: Located on the dashboard at the operator’s station is the key pad for outrigger operation, an engine display unit, rocker switches for various functions, and indicator lights. Included with the engine display are simulated gages displaying real-time values for engine RPM, battery voltage, engine hours, fuel level, oil pressure, and coolant temperature. Additional warning lamps monitor vitals like engine status, low fuel, low battery, low oil pressure, and high hydraulic fluid temperature. BACK-UP ALARM: Provides pulsating sound from 102 dB alarm when transmission is in reverse. OUTRIGGER ALARM SYSTEM: Two-tone alarm is activated when “jack down” or “beam out” controls are operated. EMERGENCY STOP SWITCH: A two-position push button switch located on the top left-hand of the dash panel. Designed to stop the engine and shut down the hydraulic system. |
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
Main Technical Specifications | |
---|---|
MAKE | Broderson |
MODEL | IC-400 |
Do you want to know if renting makes more economical sense?
Call us and find out today.