Broderson IC-250

New Broderson IC-250 Carry Deck Crane for Sale

Ideal for lifting materials that requires a compact low-profile crane that can clear overhead obstacles and maneuver in tight spaces, the versatile Broderson IC 250 is ideal for many industrial and maintenance applications. Precise control and a heavy duty design to pick and carry large or massive loads, coupled with the steering flexibility to maneuver in tight spaces, will provide you with years of versatile operating performance.

Major Standard Features

• Self-Loading Carry Deck provides practical load-carrying ability.
• Sequentially Extending/Retracting 4-Section Boom with continuous 360 degree swing rotation turret. Simplicity of the worm drive gear box results in greater reliability.
• Hoisting with a hydraulically-powered turret-mounted planetary gear system provides all the low speed power to lift heavy loads, yet also a high speed setting for faster cycle times when lifting lighter loads.
• Hydraulic Power is provided by a direct driven tandem pump delivering 29 gpm.
• Rated Capacity Limiter warns the operator of impending overload with audible and visual signals, and stops boom functions in the event of overloads.
• Multiple Steering Configurations, including 4-Wheel Steer, where the front and rear wheels steer in opposite directions, permits a very tight turning radius for quick positioning in constrained spaces. Operator can quickly switch between rear-wheel steering, 4-wheel, or crab steering, aided by electronic sensors and a control box that automatically align the steering after a new mode is selected. Rear wheels steer in two-wheel drive mode.
• EPA Tier 2 Woodward LPG Fuel Engine delivers efficient performance.
• Powershift Transmission, with 4 speeds forward and reverse, minimizes bumps and jolts during shifting that is possible at any engine speed in any gear.
• Heavy Duty Chassis Frame provides a front deck carrying capacity of 17,000 lbs.
• Four Hydraulic Independently Controlled Outriggers
• Rubber Mounted Rear Axle/Suspension eliminates sudden load swings inherent in pivot mounted axles; thus, axle oscillation lockouts are not required.
• Drum Rotation Indicator improves operator productivity.
• Outrigger Sensing on all jacks indicates outrigger position change, warnings when Jacks are not touching the ground. Each outrigger’s down and out position can be independently controlled and adjusted.
• Easy Access to engine compartment and hydraulic equipment components simplifies maintenance and repair.
• Low Profile Design ideal for tight work spaces and simplifies transportation by flatbed truck.

Available Features

• Tier-4 Interim or Tier-4 Final Turbocharged Engine available.
• All-Weather Cab with heater & defroster. Adjustable seat, provides one-position access to all operating functions.
• 4-Wheel Drive improves accessibility when encountering severe conditions at off-road sites.
• Noise Reduction Kit
• Air Conditioning
• Auxiliary Winch

Boom Attachments

• Boom Extension 20' (6.1m) offsetable to three positions (0 degree, 15 degree, 30 degree)
• Boom Work Lights—one to light the boom tip, one mounted to turret, and to light the ground under boom tip—to keep working during the dusk to dawn operating hours.
• Searcher Hook - Nose Mounted

• ENGINE
  • Spark Arrester Muffler: Installed in addition to standard muffler. (LPG only.)
  • Engine Heater: Engine coolant heater installed to circulate warm water through engine, plugs into 120 volt AC.
• AXLE & STEERING
  • 4-Wheel Steer & 2-Wheel Drive
  • 4-Wheel Steer & 4-Wheel Drive

• TIRE
  • Non Marking Pneumatic Tires
  • Foam Filling of Tires
  • Spare Tire & Wheel
• CHASSIS
  • Auxiliary Winch: Mounted on front outrigger bumper, hydraulically driven with control in operator’s console.
  • Pintle Hook: Rear and Front
  • Rearview Mirrors: One mounted on right-hand deck stake and one mounted on left-hand deck stake.
  • Outrigger Shoes: Steel outrigger shoes, 18” (46 cm) x 18” (46 cm) octagonal shape with storage posts on rear bumper.

• OPERATOR COMPARTMENT
  • Operator Guard: Tubular steel weldment with heavy expanded steel mesh top section.
  • All Weather Cab: Rigid-mounted canopy section and removable hinged door. Includes heater, electric windshield wiper, one sliding glass window in the door & one in the right side of canopy. Defroster fan & dome light included.
  • Cab Heater Only: Heater with two-speed fan for units without All Weather Cab.
  • Windshield Washer:  Includes reservoir, pump and nozzle.
  • Floor Mat: Vinyl mat with foam backing.
  • Operator Suspension Seat: Small suspension built in to provide additional operator comfort. Deluxe seat upholstery springs provide additional operator comfort.
  • Noise Reduction Kit: Includes floor mat, control valve cover and side panels of foam backed vinyl for noise reduction.
  • Air Conditioning: Air Conditioner w/134: coolant.

• ELECTRICAL
  • Strobe Lights: Yellow strobe light mounted on each side of turret weight box.
  • Boom Work Lights: One worklight mounted to boom to light boom tip, and one work light mounted to turret to light ground under boom tip.
  • Work Lights - Rear:  Two work lights recessed in rear bumper
  • RCL Light Bar: 3 color light bar for external indication of load status
• BOOM ATTACHMENTS
  • Boom Extension: 20 ft. (6.1 m) Offset. Boom stowable. Boom extension is offsettable to 3 different positions; 0 degree (in line), 15 degree and 30 degree offset.
  • Sheave Block: Two-Part Line
  • Searcher Hook: Nose Mount 5,000 lb (2,270 kg)