Main Technical Specifications
MAKE Broderson
MODEL IC-100

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

New Broderson IC-100 Carry Deck Crane for Sale

Broderson’s longest reach and highest capacity carry deck crane, the IC-100 provides heavy duty capacity to take care of all your long reach light and heavy duty lifting needs.

Body
Chassis CARGO DECK: 53 square feet (5 m 2) of deck area. A maximum of 14,000 lb. (6,350 kg) capacity on deck when load is centered over or between axles. A storage box is located in front cargo deck. Steps located on front corners. Heavy deck loads allowed at creep speed below 2 MPH (3.2 km/h) and less than 200 feet (61 m) in 30 minutes.
OUTRIGGERS: Four hydraulic outriggers of box beam construction. Independent controls for each outrigger. Each cylinder equipped with direct connected holding valves. Outrigger pad dimension: 9 inches (23 cm.) x 12 inches (30 cm.)
LIFTING RINGS: Lifting rings at each corner of cargo deck so sling can be attached for lifting crane.
Dimensions
Length 12'10"
Width 6'6"
Height 7'5"
Weight 17,520 lbs.
Turning Radius 11’2” (C/L of outside steering wheel)
9’7” (Aisle width for 90° Turn)
Capacity 11,200 lbs. (Pick and Carry)
14,000 lbs. (Carry Deck)
Horizontal Reach 43’ (w/boom extension)
Max Tip Height 49’4”
59’4” (w/10’ boom extension)
Sheave Height Up to 49’4”
Engine
Engine Make GM and Kubota
Engine Model 3.0 EFI (GM) & V3307 (Tier 4f) (Kubota)
Engine Type Gas/Fuel Dual (3.0 EFI)
Diesel (V3307 (Tier 4F))
Cylinders 4
Horsepower 59 HP (3.0 EFI)
74 HP (V3307 (Tier 4F))
Displacement 181 CID (3.0 EFI)
199 CID (V3307 (Tier 4F))
Torque Torque Converter: Stall ratio of 2.2: 1
Max Travel Speed First: Forward/Reverse-5.72: 1; Speed-4 MPH
Second: Forward/Reverse-3.23: 1; Speed-7 MPH
Third: Forward/Reverse-1.77: 1; Speed-12 MPH
Fourth: Forward/Reverse-1.00: 1; Speed-19 MPH
Fuel Tank Capacity 17.6 Gallons
Drivetrain
Axles FRONT: Planetary drive/steer axle with 11.625 : 1 axle ratio. Differential is “No-Spin.” Axle mounted rigidly to frame.
REAR: 2-Wheel Drive: Axle with 1-1/2° oscillation in either direction.
Transmission POWERSHIFT TRANSMISSION with 4-speeds in forward & reverse. Provides powershifts at any engine speed in any gear. All shifting is done with a single lever electrical control mounted on the steering column. Multiple-disc clutch packs operated by solenoid valve provide forward, neutral, reverse and speed selection. Equipped with oil cooler and filter. Torque converter has stall ratio of 2.2 : 1.
First: 5.72 (Forward): 1 (Reverse)
Second: 3.23 (Forward): 1 (Reverse)
Third: 1.77 (Forward): 1 (Reverse)
Fourth: 1.00 (Forward): 1 (Reverse)
Transmission Speeds First: 4 MPH
Second: 7 MPH
Third: 13 MPH
Fourth: 22 MPH
Hydraulic
Hydraulic Capacity 25 Gallons
Hydraulic System TANDEM PUMP, direct-driven by engine crankshaft, rated at 16 & 32 GPM at rated RPM (61 L/min & 121 L/min).
Hydraulic Pump TANDEM PUMP, direct-driven by engine crankshaft, rated at 16 & 32 GPM at rated RPM (61 L/min & 121 L/min). Hydraulic oil tank capacity of 25 gallons (95 L).
Operational
Brakes Four-wheel hydraulic.
Wet disc brakes are on the front and rear axles.
Parking brake is disc type
Tires 2-WHEEL DRIVE: 10.00 x 15, 16-ply rating, Highway Type Tread.
Steering Hydraulic steering unit with cylinders attached to each axle. Rear axle is the primary steer. An electric switch in the operator’s compartment is used to select rear-wheel steering, four-wheel round steering or crab steering. Electronic sensors and control box automatically align the steering when a new mode is selected
Gradeability 57%
Rated Operating Capacity Rated Capacity Limiter: Standard
Lift Capacity 20,000 lbs.
Drawbar Pull First: 9,500 lbs.
Second: 5,500 lbs.
Third: 3,000 lbs.
Fourth: 1,800 lbs.
Outriggers Up Lift Capacity 20,000 lbs.
Max. Carrying Capacity Pick and Carry Capacity: 11,200 lbs.
Carry Deck Capacity: 14,000 lbs.
Operators Control Provides one-position access to all operating functions. Includes adjustable operator’s seat, retracting seat belt, fire extinguisher and bubble level.
Boom
Boom Extensions 20’
Boom Rotation 360° Continuous
Heavy-duty ball bearing rotation gear with external teeth. Rotation is powered by hydraulic motor and worm gear drive
Hoist Turret mounted planetary gear hoist hydraulically powered with a bare-drum line pull of 11,500 lbs (5,200 kg) at a speed of 100 FPM (30.5` m/min). Includes down-haul weight, swivel hook & sheave block for 2-part line and 140 ft (43 m) of 9/16” (14 mm) hoist rope.
Boom Elevation 0˚ to 70˚
Boom Speed 2 RPM (Rotation)
12 secs. (Elevation)
30 secs. (Extension)
Boom Hoist Turret mounted planetary gear hoist hydraulically powered with a bare-drum line pull of 11,500 lbs (5,200 kg) at a speed of 100 FPM (30.5` m/min). Includes down-haul weight, swivel hook & sheave block for 2-part line and 140 ft (43 m) of 9/16” (14 mm) hoist rope.
Electrical
Electrical System INSTRUMENT PACKAGE: Includes fuel gauge and hourmeter. Also included are warning lights for low oil and transmission pressure, turn signal, high beams, hazard lights, parking brake, hydraulic oil temperature, battery, check engine, stop engine, coolant temperature, outriggers.
LIGHTING PACKAGE: Headlights with Hi and Low beams, back-up lights, integral tail, brake, front and rear turn signals and emergency flasher switch at operator’s station. 12V horn actuated by button on shifting control.
BACK-UP ALARM: Provides pulsating sound from 102 dB alarm when transmission is in reverse. Conforms to SAE J994b.
OUTRIGGER ALARM SYSTEM: Two-tone alarm is activated when “outrigger down” controls are operated.
Lighting Headlights with Hi and Low beams, back-up lights, integral tail, brake, front and rear turn signals and emergency flasher switch at operator’s station. 12V horn actuated by button on shifting control.

Major Standard Features

  • Sequentially Extending/Retracting 3-Section Boom with continuous 360 degree swing rotation. Simplicity of the worm drive gear box results in greater reliability.
  • Hoisting turret mounted planetary gear hoist hydraulically powered with a bare-drum line pull of 11,500 lbs (5,200 kg) at a speed of 100 FPM (30.5` m/min). Includes down-haul weight, swivel hook & sheave block for 2-part line and 140 ft (43 m) of 9/16” (14 mm) hoist rope.
  • Hydraulic Power is provided by a triple-vane pump delivering 13, 25 & 40 gal/min flow.
  • Rated Capacity Limiter warns the operator of impending overload with audible and visual signals, and stopping boom functions in the event of overloads. Electronic level sensor is also integrated to controls.
  • 4-Wheel Steer, where the front and rear wheels steer in opposite directions, permits a very tight turning radius to quickly and optimally position the IC-100 in constrained spaces. Operator can quickly switch between rear-wheel steering, 4-wheel steering or crab steering, aided by electronic sensors and a control box that automatically align the steering after a new mode is selected. Rear wheels steer in two-wheel drive mode.
  • Rugged Heavy Duty Chassis Frame provides a front deck carrying capacity of 14,000 lbs.
  • EPA Tier-4(i) Turbocharged Diesel Engine delivers efficient performance, plus all of the low-end torque you need.
  • Powershift Transmission with 4-speeds in forward & reverse.  Provides powershifts at any engine speed in any gear.  All shifting is done with a single lever electrical control mounted on the steering column.  Multiple-disc clutch packs operated by solenoid valve provide forward, neutral, reverse and speed selection.  Equipped with oil cooler and filter.  Torque converter has stall ratio of 2.2 : 1.
  • Four Hydraulic Independently Controlled Outriggers partitioned from boom functions ensures safer and more precise operations.
  • Drum Rotation Indicator improves operator productivity.
  • Outrigger Sensing on all jacks indicate outrigger position change, warnings when Jacks are not touching the ground. Each outrigger’s down and out position can be independently controlled and adjusted.
  • All Weather Cab with heater and defroster. Includes tilt wheel and extended shoulder, leg and headroom to provide great comfort for big and tall operators.
  • Operator's Control Station provides one-position access to all operating functions. Includes adjustable operator’s seat, retracting seat belt,fire extinguisher and bubble level.
  • Easy Access to engine compartment and hydraulic equipment components simplifies maintenance and repair.

Available Features

  • Boom Work Lights—one to light the boom tip, one mounted to turret, and to light the ground under boom tip—to keep working during the dusk to dawn operating hours.
  • 4-Wheel Drive improves accessibility when encountering severe conditions at off-road sites.
  • Front-Mounted Auxiliary Winch with a capacity of 10,000 lbs.
  • Two Strobe Lights mounted on opposite sides of counterweight box.
  • Boom Extension 10' offsetable to three positions (0 degree, 15 degree, 30 degree)

  • ENGINE OPTIONS
    • Spark Arrester Muffler: Installed in addition to standard muffler
    • Catalytic Converter: Reduces engine emissions
    • Engine Heater: Coolant heater installed to circulate warm water through engine. Plugs into 120 volt AC, 1,500 watts
  • TIRE OPTIONS
    • Mining & Industrial: 11 x 15 , 120 lbs. (57 kg.)
    • Mining & Industrial Non-Marking: 10 x 15 , 120 lbs. (57 kg.)
    • Solid Rubber Tires: 8.25 x 15
    • Foam Filled Tires: All four 400 lbs. (181 kg.)
    • Spare Tire & Wheel: Mounted
  • CHASSIS
    • Auxiliary Winch: Mounted behind front bumper, hydraulically driven with controls.
    • Pintle Hook:
      • Pintle Hook, Rear
      • Pintle Hook, Front
    • Rearview Mirrors: One mounted on right & left-hand deck stake
  • OPERATOR COMPARTMENT
    • Operator Guard: Tubular steel weldment with heavy expanded steel mesh top section.
    • All-Weather Cab:  Rigid-mounted canopy section & removable hinged door. Includes heater, electric windshield wiper, one sliding glass window in the door & one in the right side of canopy. Defroster fan & dome light included.:
    • Cab Heater: Heater with two-speed fan for units without All  Weather Cab.
    • Windshield Washer: Includes reservoir pump and nozzle.
    • Floor Mat: Vinyl mat with foam backing.
    • Deluxe Seat: Provides additional operator comfort.
    • Noise Reduction Kit: Includes floor mat, control valve and side panels of foam backed vinyl for noise reduction.
    • Air Conditioning: Air Conditioner with R134 coolant.
  • ELECTRICAL
    • Strobe Lights: Yellow strobe light mounted on each side of turret weight box.
    • Boom Work Lights: One work light mounted to boom to light boom tip and one work light mounted to turret to light ground under boom tip.
    • Work Lights-Rear: Two work lights recessed in rear bumper.
    • RCL Light Bar: 3 color light bar for external indication of load status
  • BOOM ATTACHMENTS
    • Boom Extension: 10ft. (3m), Boom stowable.
    • Boom Extension: 10ft. (3m), Offsettable.  Same as above item, except boom extension is offsettable to 3 different positions; 0° (inline), 15° and 30° offset.
    • Searcher Hook: Nose Mount

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.