Wirtgen WPS 102i

New Wirtgen WPS 102i Placer/Spreader for Sale

If reinforcement needs to be laid in advance during the construction of concrete roadways, the concrete can be fed in laterally using a placer/spreader. The placer/spreader travels in front of the slipform paver over the pre-placed reinforcement, while a truck mixer feeds the belt conveyor with concrete from the side. The concrete is poured evenly over the pre-placed reinforcement, in front of the slipform paver, and distributed across the entire working width. Once the truck mixer is empty, the belt conveyor can be folded away in a very short time to clear the path for the next mixer.

High-performance side feeding and homogeneous spreading of concrete.

  • The cost-effective two-track placer/spreader is designed for high-performance concrete feeding at widths of 12 ft to 40 ft and thicknesses of 20 in (500 mm).
  • The machine concept with a hydraulically telescoping machine frame and concrete strike-off unit makes the machine highly adaptable to any job site situation.
  • The powerful, fast folding feeder conveyor features an intelligent control concept and guarantees maximum concrete availability for the slipform paver following behind it.
  • The fully modular machine design comes standard-equipped with hydraulic quick-change couplings for easy conversion, rapid transport, and maximum machine availability.
  • The machine can be precisely controlled via stringline scanning, via 3D applications without a stringline, or via WIRTGEN Autopilot 2.0.
Specs
Strike Off Wall: Modularly extendable up to 40'
Dimensions
Length 23’3”
Width 25’4”
Height 13’9”
Weight 92.065 lbs.-103.088 lbs.
Height Adjustment 3’3”
Crawler Track 2
Engine
Engine Type US EPA Tier 4f
Fuel Tank Capacity 132 Gallons
Engine/Drivetrain
Engine Make Cummins
Engine Model L9 C-310
Cylinders 6
Horsepower 310 HP
Cooling Water
Displacement 543 in³
Operational
Paving Speed 0-16 ft/min
Travel Speed - Forward 0-59 ft/min
Center Crown ±3%
Belt Conveyor Width 5’3”
Belt Conveyor Speed 0 to 9.8 ft/s
Position Units Type B4: 11’1” x 20” x 2’5”
Belt Conveyor Folding Process 6 sec.
Electrical
Power Supply 24 V DC
Paving
Paving Width 12’-40’
Spreader/Auger Two-piece, modularly extendable up to 40’
Slab Paving Application Paving Height: 0-20"

STANDARD FEATURES

Exhaust emissions category: US EPA Tier 4f

Rated power: 310 HP

Number of crawlers: 2

Paving width: 12’-40’

Paving height: 0-20”

Operating weight, CE (at paving width of 12’): 92.065 lbs.-103.088 lbs.

Paving speed: 0-16 ft/min

Travel speed: 0-59 ft/min

Displacement: 543 in³

 

Standard Equipment

  • Basic machine
    • Fuel tank 106 gal
    • Electrical system (24 V)
    • Cooling system with temperature-controlled fan speed
    • Hydraulic system including an generously dimensioned hydraulic oil tank and a pump transfer gearbox with four output shafts and the pumps required for the machine’s basic equipment package
  • Main Frame and Height Adjustment
    • Heavy-duty steel frame which can be telescoped hydraulically to either side by 4 ft 8 in (1.42 m), enabling a total telescoping range of 9 ft 4 in (2.84 m); optional expansion using fixed extension pieces
    • The machine frame is pre-fitted with multiple mounting points for the modular addition of a variety of equipment features
    • A concrete equipment for 12 ft can be connected to the frame, optionally extendable to 40 ft
  • Crawler Units and Chassis Linkage
    • Paving speed of B4 track unit: 0 to 16 fpm (5 m/min)
    • Transport speed of B4 track unit: 0 to 65 fpm (20 m/min)
  • Machine Control, Leveling and Steering
    • WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
    • Error messages are displayed on the machine’s control screen
    • The existing CAN-bus system can be expanded to customer specifications
    • ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
    • Proportional electrohydraulic leveling and steering by means of a PLC system including four leveling sensors and two steering sensors
    • Sensor mounting brackets, adjustable in height and range
    • An electronic slope sensor enables paving with a working with of 13 ft (4.00 m) with a stringline on only one side
    • Four leveling hydraulic cylinders with 3 ft 6 in (1.10 m) stroke
  • Operator’s Platform
    • Ergonomically designed operator’s platform providing a perfect view of the paving process
    • Three control panels with clear, language-independent labeling for ergonomic operation
    • Control panel 1 for machine setup according to site requirements
    • Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu; the control panel can be adjusted to all directions of travel and paving configurations
    • Control panel 3 for controlling concrete feeding and spreading
    • Two control panels can be stored in the engine compartment; the third control panel can be protected against vandalism and weather by means of a lockable cover

 

Standard equipment, can be replaced with optional equipment if desired

  • Main Frame and Height Adjustment
    • Frame sections for continuous hydraulic telescoping in increments to working widths of up to 22 ft 4 in (6.80 m)
  • Concrete Spreading Equipment for Slab Paving
    • Concrete placing unit, consisting of a two-part spreading auger and a height-adjustable strike-off unit, basic width 12 ft
  • Crawler Units and Chassis Linkage
    • Model with two B4 track units (8 rollers), fitted with triple-grouser steel track pads, width 20 in (500 mm)
  • Concrete Feeding System
    • Powerful conveyor belt used to feed concrete from the side, length 22 ft (6,70 m)
  • Miscellaneous
    • Standard painting in RAL 9001 (cream)
    • WITOS – professional telematics solution for machine operation and service optimization
    • Lighting system including 4 halogen working lights, ,24 V
  • Main Frame and Height Adjustment
    • Frame sections for continuous hydraulic telescoping to either side by 4 ft 8 in (1.42 m), enabling a total telescoping range of 9 ft 4 in (2.84 m) for working widths up to 31 ft 2 in (9.50 m)
    • Frame sections for continuous hydraulic telescoping to either side by 4 ft 8 in (1.42 m), enabling a total telescoping range of 9 ft 4 in (2.84 m) for working widths up to 40 ft 4 in (12.30 m)
    • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 31 ft 2 in (9.50 m)
    • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 40 ft 4 in (12.30 m)
  • Concrete Spreading Equipment for Slab Paving
    • Extension for concrete placing unit 1 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 1.5 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 2 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 4 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 6 ft on the left – spreading auger and strike-off wall
    • Extension for concrete placing unit 1 ft on the right – spreading auger and strike-off wall
    • Extension for concrete placing unit 1.5 ft on the right – spreading auger and strike-off wall
    • Extension for concrete placing unit 2 ft on the right – spreading auger and strike-off wall
    • Extension for concrete placing unit 4 ft on the right – spreading auger and strike-off wall
    • Extension for concrete placing unit 6 ft on the right – spreading auger and strike-off wall
    • Model without concrete spreading
  • Crawler Units and Chassis Linkage
    • Model with two B4 track units (8 rollers), fitted with polyurethane track pads, width 20 in (500 mm)
  • Machine Control, Leveling and Steering
    • Cross-slope sensor
    • Self-leveling feature for transport mode
    • Two slab tracers
    • Four slab tracers
    • Control unit for manual track unit steering
    • Pre-fitting for 3D leveling
    • Additional slope sensors for 3D leveling
    • AutoPilot 2.0 (902 – 928 MHz) with Field Rover
    • Amplifier to extend the range of the AutoPilot signal, radio frequency: 902 -928 MHz
    • Laser transmitter for AutoPilot 2.0 including stand
    • Laser receiver for AutoPilot 2.0
    • Ultrasonic sensor for AutoPilot 2.0
    • Additional tablet computer with case for AutoPilot 2.0
    • Total station Leica iCON iCR80s for AutoPilot 2.0, 902 – 928 MHz
  • Concrete Feeding System
    • Powerful conveyor belt used to feed concrete from the side, 25 ft (7,60 m)
    • Powerful conveyor belt used to feed concrete from the side, 28 ft (8,50 m)
  • Operator’s Platform
    • Weather canopy for operator’s platform, hydraulically telescoping in height
    • Weather canopy for operator’s platform, hydraulically telescoping in height, with LED lighting
  • Miscellaneous
    • Painting in one special color (RAL)
    • Painting in two special colors (RAL)
    • Model without WITOS
    • High-performance lighting system including 8 LED working lights, 24 V
    • Hydraulic high-pressure water cleaning systems with 145 gal (550 l) plastic tank
    • Two hydraulic high-pressure water cleaning systems with 145 gal (550 l) plastic tanks
    • Additional plastic water tank, 145 gal (550 l)
    • Additional electrical water pump, 24 V, with 32 ft 10 in (10.00 m) hose and spray gun with handle
    • Rotating beacon, halogen 24 V, with magnetic base
    • Two flashing beacons, 24 V, with magnetic base
    • Ramps for loading machines with two crawler tracks units
    • 2 integrated supports underneath the chassis to enable the width of the machine frame to be easily adjusted
    • Radio remote control used to adjust the height of the strike-off wall
    • Camera system consisting of 1 camera and 1 screen, expandable to up to 6 cameras
    • Additional camera as an extension to an existing camera system
    • Two LED floodlights including power generator (230 V)
    • Two LED floodlights including power generator (110 V)
    • Two LED floodlights (24 V)
    • High-performance lighting system including 4 LED working lights, 24 V, for illuminating the compaction compartment
    • 230 volt power generator, hydraulically driven, rated power of 4 kW
    • 110 volt power generator, hydraulically driven, rated power of 4 kW
    • Stringline tensioning system, complete with 3,280 ft (1,000 m) steel wire rope
    • Additional tensioning winch for stringline tensioning system
    • Stringline tensioning system, complete with 4 x 984 ft (4 x 300 m) nylon rope
    • Export packaging

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE Wirtgen
MODEL WPS 102i

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

Wirtgen WPS 102i

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Wirtgen WPS 102i Placer/Spreader for Sale

If reinforcement needs to be laid in advance during the construction of concrete roadways, the concrete can be fed in laterally using a placer/spreader. The placer/spreader travels in front of the slipform paver over the pre-placed reinforcement, while a truck mixer feeds the belt conveyor with concrete from the side. The concrete is poured evenly over the pre-placed reinforcement, in front of the slipform paver, and distributed across the entire working width. Once the truck mixer is empty, the belt conveyor can be folded away in a very short time to clear the path for the next mixer.

High-performance side feeding and homogeneous spreading of concrete.

  • The cost-effective two-track placer/spreader is designed for high-performance concrete feeding at widths of 12 ft to 40 ft and thicknesses of 20 in (500 mm).
  • The machine concept with a hydraulically telescoping machine frame and concrete strike-off unit makes the machine highly adaptable to any job site situation.
  • The powerful, fast folding feeder conveyor features an intelligent control concept and guarantees maximum concrete availability for the slipform paver following behind it.
  • The fully modular machine design comes standard-equipped with hydraulic quick-change couplings for easy conversion, rapid transport, and maximum machine availability.
  • The machine can be precisely controlled via stringline scanning, via 3D applications without a stringline, or via WIRTGEN Autopilot 2.0.
GENERAL INFORMATION
Manufacturer
Wirtgen
Model Year
Model
WPS 102i
Condition
NEW
Specs
Strike Off
Wall: Modularly extendable up to 40'
Dimensions
Length
23’3”
Width
25’4”
Height
13’9”
Weight
92.065 lbs.-103.088 lbs.
Height Adjustment
3’3”
Crawler Track
2
Engine
Engine Type
US EPA Tier 4f
Fuel Tank Capacity
132 Gallons
Engine/Drivetrain
Engine Make
Cummins
Engine Model
L9 C-310
Cylinders
6
Horsepower
310 HP
Cooling
Water
Displacement
543 in³
Operational
Paving Speed
0-16 ft/min
Travel Speed - Forward
0-59 ft/min
Center Crown
±3%
Belt Conveyor Width
5’3”
Belt Conveyor Speed
0 to 9.8 ft/s
Position Units
Type B4: 11’1” x 20” x 2’5”
Belt Conveyor Folding Process
6 sec.
Electrical
Power Supply
24 V DC
Paving
Paving Width
12’-40’
Spreader/Auger
Two-piece, modularly extendable up to 40’
Slab Paving Application
Paving Height: 0-20"

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT