• Exhaust emissions category:  US EPA Tier 4f
• Number of crawler tracks: 2
• Paving width: 16’-40’
• Paving height: 0-18”
• Pacing width with & without crown: 16’-40’
• Paving speed: 0-16 ft/min
• Travel speed: 0-65 ft/min
• Displacement: 543 in³
• Machine weight: 55,000-110,000 lbs
• Rated power: 231 kW / 310 hp

Standard Equipment

• Basic Machine
  • Hydraulic system including an generously dimensioned hydraulic oil tank and a pump transfer gearbox with four output shafts and the pumps required for the machine’s basic equipment package
  • Cooling system with temperature-controlled fan speed
  • Electrical system (24 V)
  • Fuel tank 132 gal (500 l)
• Main Frame and Height Adjustment
  • Robust steel frame, incremental hydraulic telescoping on both sides by up to 9.00 ft, can also be optionally extended using fixed extension pieces
  • The machine frame is pre-fitted with multiple mounting points for the modular addition of a variety of equipment features
  • Four hydraulic leveling cylinders with a stroke of 3 ft 3 in (1.00 m)
• Crawler Units and Chassis Linkage
  • Model with two B4 track units (8 rollers), fitted with polyurethane track pads
• Machine control, leveling and steering
  • WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
  • Error messages are displayed on the machine’s control screen
  • The existing CAN-bus system can be expanded to customer specifications
  • ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
  • Proportional electrohydraulic leveling and steering by means of a PLC system including four leveling sensors and two steering sensors
  • Sensor mounting brackets, adjustable in height and range
• Operator’s Platform
  • Ergonomically designed operator’s platform providing a perfect view of the paving process
  • Three controls panels with clear, language-independent labeling for ergonomic operation
  • Control panel 1 for machine setup according to site requirements
  • Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu
  • The control panel can be adjusted to all directions of travel and paving configurations
  • Control panel 3 for controlling the concrete equipment
  • Two control panels can be stored in the engine compartment; the third control panel can be protected against vandalism and weather by means of a lockable cover
  • Automatic recognition of each machine configuration provides easy orientation for the machine operator
• Miscellaneous
  • Electrically switchable pendulum axle (left/right/off) for paving with 3 height sensors/slope control sensors
  • Large tool kit in lockable tool box
  • Comprehensive safety package with EMERGENCY STOP switches
  • Pre-fitting for installing the WITOS FleetView control unit
  • Filling of the machine’s hydraulic system with mineral hydraulic oil

Standard Equipment, can be replaced with optional equipment if desired

• Main Frame and Height Adjustment
  • Frame sections for continuous hydraulic telescoping to working widths of up to 22 ft 4 in (6.80 m), including extension elements
• Vibration
  • Hydraulic vibrator drive for max. 18 vibrators
  • 10 curved vibrators D66, hydraulically driven
• Concrete equipment for Slab Paving
  • Paving mold series 1310 wi, without crown – basic width 16 ft
  • One-piece sideplates for paving molds series 1300 wi/1310 wi
  • Flat inserts for the outer edges of the mold series 1310 wi
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Lighting system including 4 halogen working lights, 24 V

• Main Frame and Height Adjustment
  • Frame sections for continuous hydraulic telescoping to working widths up to 31 ft 2 in (9.50 m)
  • Frame sections for continuous hydraulic telescoping to working widths up to 40 ft (12.30 m)
• Machine control, leveling and steering
  • Cross-slope sensor for machine
  • Automatic crown adjustment
  • Two slab tracers
  • Four slab tracers
  • Control unit for manual track unit steering
  • Preliminary equipment for 3D leveling with Leica Topcon or Trimble
  • Additional slope sensors for 3D leveling
• Concrete Spreading Equipment for Slab Paving
  • Spreading plow – basic width 16 ft
  • Spreading plow – extension element 1.00 ft
  • Spreading plow – extension element 1.50 ft
  • Spreading plow – extension element 2.00 ft
  • Spreading plow – extension element 4.00 ft
  • Spreading plow – extension element 6.00 ft
• Vibration
  • Hydraulic vibrator drive for max. 24 vibrators
  • Hydraulic vibrator drive for max. 30 vibrators
  • Version without vibrators
  • Tamper bar with/without crown – basic width 16 ft
  • Curved vibrator D66, hydraulically driven
  • Tamper bar – extension element 1.00 ft
  • Tamper bar – extension element 1.50 ft
  • Tamper bar – extension element 2.00 ft
  • Tamper bar – extension element 4.00 ft
  • Tamper bar – extension element 6.00 ft
• Concrete equipment for slab paving
  • Split metering gate for paving molds with/without crown – basic width 16 ft
  • Automatic metering gate control for concrete paving mold
  • Split grout box auger with/without crown – basic width 16 ft
  • Paving mold series 1310 wi, with crown – basic width 16 ft
  • Split side plates for start of shift with paving molds series 1300 wi/1310 wi
  • ESC “Edge Slump Control” inserts for the outer edges of the mold series 1310 wi
  • Super smoother – basic width 16 ft
  • 1 side tie bar inserters for straight tie bars, max. Ø ¾”, length 2.50 ft
  • 2 side tie bar inserters for straight tie bars, max. Ø ¾”, length 2.50 ft
  • Metering gate – extension element 1.00 ft
  • Metering gate – extension element 1.50 ft
  • Metering gate – extension element 2.00 ft
  • Metering gate – extension element 4.00 ft
  • Metering gate – extension element 6.00 ft
  • Grout box auger – extension element 1.00 ft
  • Grout box auger – extension element 1.50 ft
  • Grout box auger – extension element 2.00 ft
  • Grout box auger – extension element 4.00 ft
  • Grout box auger – extension element 6.00 ft
  • Paving mold series 1310 wi – extension element 1.00 ft
  • Paving mold series 1310 wi – extension element 1.50 ft
  • Paving mold series 1310 wi – extension element 2.00 ft
  • Paving mold series 1310 wi – extension element 4.00 ft
  • Paving mold series 1310 wi – extension element 6.00 ft
  • Profile insert for series 1300 wi/1310 wi
  • Super smoother – extension element 1.00 ft
  • Super smoother – extension element 1.50 ft
  • Super smoother – extension element 2.00 ft
  • Super smoother – extension element 4.00 ft
  • Super smoother – extension element 6.00 ft
• Operator’s Platform
  • Weather canopy for operator’s platform, hydraulically telescoping in height
  • Weather canopy for operator’s platform, hydraulically telescoping in height, with LED lighting
  • Extension of walkway allowing the operator to pass from one side of the machine to the other, 31 ft (9.50 m)
  • Extension of walkway allowing the operator to pass from one side of the machine to the other, 40 ft (12.30 m)
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • Painting in one special color (RAL)
  • Painting in two special colors (RAL)
  • Model without WITOS FleetView
  • Lighting system including 4 halogen working lights, 24 V
  • High-performance lighting system including 8 LED working lights, 24 V
  • Hydraulic high-pressure water cleaning system with 145 gal (549 l) plastic tank
  • Two hydraulic high-pressure water cleaning systems with two 145 gal (549 l) plastic tanks
  • Additional electrical water pump, 24 V, with 32 ft 10 in (10 m) hose and spray gun with handle
  • Self-leveling feature for transport mode
  • Rotating beacon, halogen24 V, with magnetic base
  • Two flashing beacons, 24 V, with magnetic base
  • Two LED floodlights including power generator (230 V)
  • Two LED floodlights including power generator (110 V)
  • High-performance lighting system including 4 LED working lights, 24 V, for illuminating the compaction compartment
  • Two LED floodlights 24 V
  • Stringline tensioning system, complete with 3,280 ft (1,000 m) steel wire rope
  • Additional tensioning winch for stringline tensioning system
  • Stringline tensioning system, complete with 4 x 984 ft (4 x 300 m) nylon rope
  • Machine commissioning (day rate)
  • Export packaging