Wirtgen W 200 Fi

New Wirtgen W 200 Fi Large Milling Machine for Sale

Large milling machines have a milling drum positioned centrally beneath the machine and a two-part front-loading system. Trucks can be loaded quickly and flexibly via the slewing and height-adjustable discharge conveyor. A variety of different milling drums and milling drum assemblies are available to cater to the wide array of milling tasks. They can be exchanged quickly and easily to suit the application. The range of applications extends from wide-scale complete removal down to a depth of 35 cm in a single pass to the rehabilitation of concrete pavements and airport runways as well as fine milling to improve pavement skid resistance.

• The easy-to-operate, compact cold milling machine caters to a wide range of applications from surface course rehabilitation to the removal of pavements at full depth.
• The innovative MILL ASSIST machine control system permits efficient operation of the machine in automatic mode paired with high performance and user friendliness
• The machine completes milling jobs with the utmost precision thanks to the advanced LEVEL PRO ACTIVE leveling system.
• Reliable WIRTGEN cutting technology using the innovative HT22 PLUS upper toolholder part minimizes both pick wear and operating costs.
• The high-capacity, hydraulically operated folding conveyor offers conveyor slewing angles of up to 65° to the left and right for flexibility in operation.

• Exhaust emissions category: US EPA Tier 4f
• Operating weight, CE: 62,000 lbs
• Milling width: 7 ft 3 in
• Milling depth max.: 13 in
• Displacement: 4 Imp.gal
• Net weight of the machine without operating agents: 58,600 lbs
• Max. travel and milling speed: 0 t- 330 ft / min (3.7 mph)
• Maximum power: 455 kW / 610 hp
• Shipping weight, US standard (full fuel tanks, without water): 60,800 lbs

Standard Equipment

• Basic Machine
  • Machine frame featuring a single wasp waist at the rear right, and a dual wasp waist at the front
  • Hydraulically opening, soundproof engine cowling
  • Air compressor system
  • Two cooling fans to minimize power consumption of the cooling system
• Milling Drum Unit
  • Adjustment of material depressor contact pressure via the control panel or automatically via the MILL ASSIST feature to reduce chunk formation
  • Electrical adjustment of scraper contact pressure via the control panel
  • Automatically controlled locking feature of scraper
  • Automatic control of the water quantity via the MILL ASSIST feature
  • Height adjustment stroke increased by 5.9 in (150 mm) to facilitate pick replacement and the exchange of milling drum units
  • Pre-fitting to allow the quick exchange of milling drum units
  • Hydraulically lifting side plates, clearance right 17.7 in (450 mm), clearance left 11.8 in (330 mm)
• Loading of the Milled Material
  • Increased conveyor slewing angles of 65° each to the left and right
  • Discharge conveyor with adjustable conveying speed
  • Boost feature for a temporary increase of the belt speed and conveying performance of the discharge conveyor by 20%
  • Larger conveyor pump for a constant belt speed even at a low engine speed of 1,300 rpm
  • Discharge conveyor, 25 ft 11 in (7,900 mm) long, 2 ft 9 in (850 mm) wide, with hydraulic folding device
• Machine and Leveling Control
  • User-friendly control panel including 7” color screen
  • LEVEL PRO ACTIVE leveling leveling system with numerous automated and complementary features relieving the operator of a part of his workload
  • LEVEL PRO ACTIVE – automatic height control in transport mode
  • LEVEL PRO ACTIVE – ramp milling and auto-start feature for the second milling cut
  • RAPID SLOPE cross slope sensor for the LEVEL PRO ACTIVE leveling system
  • MILL ASSIST assistance system for automatic adjustment of the milling drum speed in accordance with the main area of application and the parameters selected in terms of engine load, advance rate, milling volume and quality of the milling pattern
  • Comprehensive machine diagnostics integrated into the control panel including, for example, a diagnostic system for the CAN bus
  • Voltmeter integrated into the control panel for voltage measurement in the event of a malfunction
  • Two control panels for operating functions performed by ground crew
• Operator’s Stand
  • Anti-vibration mounted operator’s platform across the full width of the machine including fold-out railing, right
  • Two mirrors at the front, one mirror at the rear of the machine
  • Operator’s platform with simple stand-up
• Crawler Unit and Height Adjustment
  • PTS – automatic alignment of the machine parallel to the pavement surface
  • ISC – intelligent track speed control including hydraulic four-track drive
  • High travel speed of up to 328.1 ft/min (100 m/min) at low engine speeds (1,350 rpm), reduced diesel consumption and low noise emissions
  • Lifting speed of the height adjustment feature increased by 60%
  • Four track units type B1 with EPS polyurethane track pads
• Miscellaneous
  • “Welcome” and “Go home” lights feature in the area of the operator’s platform and access
  • High-pressure water system with automatic on/off function, 261 psi (18 bar), 17 gal/min (67 l/min)
  • Pneumatic hammer with pick extractor/inserter
  • A total of six EMERGENCY STOP switches in appropriate positions on the machine
  • European design type certification, EuroTest mark and CE conformity
  • Water tank filing from rear of machine
  • WITOS FleetView – professional telematics solution to optimize machine use and servicing
  • Standard LED lighting system with 20,600 lumens

Extended Equipment

• Milling Drum Unit
  • Milling drum housing FB2200 (7 ft 3 in)
• Milling Drums
  • Milling drum FB2200 (7 ft 3 in) HT22 LA18 with 159 picks
• Loading of the Milled Material
  • VCS extraction system
  • Support device for discharge conveyor
• Machine and Leveling Control
  • 5” control panel for controlling the leveling system
  • Extension of LEVEL PRO ACTIVE with one hydraulic sensor mounted on the right
  • 2-fold camera system
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • Extended electro-hydraulic unit
  • Storage compartment close to the rear track units for 8 pick containers
  • Milling drum rotation device

• Milling Drum Unit
  • Milling drum housing FB2000 (6 ft 7 in)
  • Wear protection rollers for side plates
• Milling Drums
  • Milling drum FB2000 (6 ft 7 in) HT22 LA15 with 162 picks
  • Milling drum FB2000 (6 ft 7 in) HT22 LA18 with 148 picks
  • Milling drum FB2200 (7 ft 3 in) HT22 LA15 with 175 picks
• Machine and Leveling Control
  • Extension of LEVEL PRO ACTIVE with two hydraulic sensors mounted on the right and left
  • Extension of LEVEL PRO ACTIVE with two ultrasonic sensors for multiplex scanning
  • Extension of LEVEL PRO ACTIVE with four ultrasonic sensors for multiplex scanning
  • Extension of LEVEL PRO ACTIVE with pre-fitting for 3D leveling for machines without canopy
• Miscellaneous
  • Painting in one special color (RAL)
  • Two-piece additional weight totaling 3,500 kbs, *1,600 kg)
  • Electrical diesel suction and pressure pump including 24 ft 7 in (7.50 m) suction hose