Wirtgen W 150 XFi

Wirtgen W 150 XFi

New Wirtgen W 150 XFi Compact Milling Machine for Sale

The highly flexible compact milling machines combine the advantages of the small and large milling machine classes. The maneuverable front-loaders are easy to transport and are ideal for use on confined job sites. These powerful machines can mill off entire asphalt pavements cost-effectively. A wide range of different milling drums is available, greatly extending the possible range of applications so that the milling of individual layers and fine milling operations are also among the everyday tasks of these machines.

  • The most powerful cold milling machine in the compact class is the ideal candidate especially for use on major construction sites in restricted space conditions such as in city centers.
  • FCS permits the use of different milling drums offering maximum working widths of up to 1.80 m for increased flexibility and machine utilization.
  • The machine’s low weight and milling drum unit mounted in the center of the machine ensure ideal weight distribution.
  • Flexible adjustment of the extra-large slewing angles and speed of the front-loading conveyor ensure efficient material loading.
  • The state-of-the-art machine management system, LEVEL PRO PLUS leveling system and intuitive operating concept enable efficient one-man operation.

Dimensions
Length 45 ft 9 in
Width 7 ft 9 in FB1500 Standard
8 ft 4 in FB1800 Optional
Height 9’10”
Weight 45,966 lbs
Engine
Engine Make Cummins
Engine Model QSL 9
Engine Type US EPA Tier 4f
Cylinders 6
Horsepower 400 HP
Cooling Water
Displacement 2.4 gal
Fuel Consumption 19.8 GPH (at rated power)
7.9 GPH (during a mixture of job site operations)
Fuel Tank Capacity 214 Gallons
Water Tank Capacity 594.4 gal
Drivetrain
Tracks 4’4” x 10” x 22” (track chains front/back)
Working Speed 0-131 ft/min (1.5 mph) (Milling)
Travel Speed - Forward 0-410 ft/min (4.7 mph)
Speeds 0 to 410 ft/min (4.7 mph) (travel)
Hydraulic
Hydraulic Tank Capacity 31.7 gal
Operational
Cutting Width 4’11” (standard)
5’11” (optional)
Cutting Depth 13”
Cutting Diameter 3 ft 3 in
Conveyor Belt Width 2’2” (Primary)
2’ (Discharge)
Electrical
Power Supply 24 V

  • Exhaust emissions category: US EPA Tier 4f
  • Operating weight, CE: 45,966 lbs
  • Milling width: 4 ft 11 in
  • Milling depth max.: 13 in
  • Displacement: 2.4 Imp.gal
  • Max. travel speed: 4.7 mph
  • Max. milling speed: 1.5 mph
  • Maximum power: 298 kW / 400 hp

Standard Equipment

  • Basic Machine
    • Base machine with engine including exhaust gas aftertreatment according to US EPA Tier 4f consisting out of a diesel oxidation catalyst (DOC) and a diesel particulate filter (DPF)
    • Machine chassis with wasp waist on the right side (zero edge)
    • Electrohydraulically opening engine cowling
    • Radiator with temperature-dependent fan speed
    • Additional control switch for scraper blade, bottom right
    • Elastically mounted engine station with low vibration and low noise
    • Three milling drum rotation speeds with electric on/off function 106 r.p.m.-96 r.p.m.-86 r.p.m.
    • Air compressor system
  • Milling Drum Unit
    • The right-hand side of the milling drum housing can be easily opened for maintenance or drum change
    • Hydraulic material depressor with conveyor lifting function
    • Hydraulically opening scraper plate with convenience locking
    • Exchangeable wearing segments on the side plate
  • Loading of the Milled Material
    • Discharge conveyor slewing angle left 60 degrees – right 60 degrees
    • Hydraulically foldable discharge conveyor with two swing speeds, including adjustable conveyor speed for precise loading
  • Machine Control and Leveling System
    • LEVEL PRO PLUS leveling system right and left
    • RAPID SLOPE cross-slope sensor for LEVEL PRO PLUS leveling system
    • Load-dependent advance control
    • 4-track drive with manually activated, electronic anti-slip control
    • 4 selectable steering modes
    • Automatic engine speed control
  • Operator’s Platform
    • Convenient control panel with practical switches
    • Multi-function armrest including color operating display for one-handed operation of most machine functions
    • Digital multi-function display for all important operating conditions
    • Scraper height indicator on control panel
    • Operating panel nighttime lighting
    • Robust anti-vandalism protection for the controls
    • Adjustable steering wheel position
    • Optimally positionable operator’s seat
    • Footstep right and left with conveniently folding ladder
    • Two mirrors front, one mirror middle and one mirror in rear area of the machine
  • Track Unit and Height Adjustment
    • Jog mode for height adjustment
    • Fourfold full-floating axle for high machine stability
    • PTS – automatic alignment of the machine parallel to the pavement surface
    • ISC – intelligent track speed control including hydraulic four-track drive
    • Reversing with the milling drum rotating.  Simple and fast maneuvering
    • Equipped with extremely wear-resistant 2-piece polyurethan track pads
  • Miscellaneous
    • Automatic water management
    • Large tool package
    • Generously sized water and diesel tanks
    • Total of 3 EMERGENCY STOP switches at sensible positions on the machine
    • “Welcome” and “Go home” lights feature including LED lighting in the area of the operator’s platform and access
    • Pre-fitting for installing the WITOS FleetView control unit
    • European type certification, EuroTest mark and CE conformity

Standard Equipment, can be replaced with optional equipment if desired

  • Milling Drum Unit
    • Milling drum house FB1500 (4 ft 11 in)
  • Milling Drums
    • Milling drum FB1500 (4 ft 11 in) HT22 LA15 with 136 picks
  • Loading of the Milled Material
    • Machine with hydraulic standard coupling for the discharge conveyor
    • Discharge conveyor, 26 ft 9 in (8,150 mm) long, 2 ft (600 mm) wide, with hydraulic folding device
    • Operator’s Platform
      • Standard operator’s seat
  • Miscellaneous
    • Standard painting in RAL 9001 (cream)
    • WITOS FleetView – professional telematics solution for machine operation and service optimization
    • Halogen/LED lighting system including rotating beacon
    • Electrohydraulic unit

  • Milling Drum Unit
    • Milling drum housing FB1500 (4 ft 11 in) FCS-L
    • Milling drum housing FB1500 (4 ft 11 in) FCS
    • Milling drum housing FB1800 (5 ft 11 in) FCS-L
    • Milling drum housing FB1200 (3 ft 11 in) FCS
    • Overload sensor on the scraper
    • Active floating position for the side plates, left and right
    • Milling drum rotation device
  • Milling Drums
    • FCS milling drum FB1500 (4 ft 11 in) HT22 LA15 with 136 picks
    • FCS milling drum FB1500 (4 ft 11 in) HT22 LA18 with 118 picks
    • FCS milling drum FB1500 (4 ft 11 in) HT22 LA8 with 210 picks
    • FCS milling drum FB1500 (4 ft 11 in) HT5 LA6X2 with 512 picks
    • FCS milling drum FB1500 (4 ft 11 in) HT22 LA25 with 102 picks
    • FCS milling drum FB1800 (5 ft 11 in) HT22 LA18 with 135 picks
    • FCS milling drum FB1800 (5 ft 11 in) HT22 LA8 with 248 picks
    • FCS milling drum FB1800 (5 ft 11 in) HT5 LA6X2 with 608 picks
    • FCS milling drum FB1800 (5 ft 11 in) HT22 LA25 with 114 picks
    • FCS milling drum FB1200 (3 ft 11 in) HT22 LA15 with 109 picks
    • FCS milling drum FB1200 (3 ft 11 in) HT22 LA8 with 174 picks
    • FCS milling drum FB1200 (3 ft 11 in) HT5 LA6X2 with 410 picks
    • FCS milling drum FB1200 (3 ft 11 in) HT22 LA25 with 87 picks
    • FCS milling drum FB600 (2 ft) HT22 LA12 with 79 picks
    • FCS milling drum FB900 (2 ft 11 in) HT22 LA15 with 102 picks
    • FCS milling drum FB1200 (3 ft 11 in) HT22 LA15 with 109 picks
  • Loading of the Milled Material
    • Machine with hydraulic quick-change coupling for the discharge conveyor
    • Shortened discharge conveyor, 23 ft 9 in (7,250 mm) long, 2 ft (600 mm) wide, with hydraulic folding device
    • VCS extraction system
    • Additional storage compartment on the discharge conveyor
  • Machine Control and Leveling System
    • Additional control unit for operating the machine from the ground, left
    • SONIC SKI sensor for LEVEL PRO PLUS leveling system
    • Scanning in front of the milling drum unit
    • Additional operating display LEVEL PRO PLUS
    • Multiplex pre-fitting comprising 4 sensor sockets and holder
    • 3-way multiplex system, right, including 2 ultrasonic sensors
    • 3-way multiplex system, right and left, including 4 ultrasonic sensors
    • Level control 3D leveling pre-equipment
    • Basic equipment laser leveling without laser transmitter
    • Milling depth measurement and display in the LEVEL PRO PLUS display
    • Job data acquisition in the control display
  • Operator’s Platform
    • Comfort operator’s seat incl. seat heating
    • Weather canopy with electro-hydraulic fold-down feature
    • Operator’s platform heater
  • Track Unit and Height Adjustment
    • Increased traveling speed (up to 4,5 mph (7,5 km/h))
    • Precision steering by pushbuttons
  • Miscellaneous
    • Standard film coating in RAL 9001 (cream)
    • Film coating according to the customer’s wishes
    • High-power lighting system LED including rotating beacon
    • Extended electrohydraulic unit
    • Additional weight 1,984 lbs. (900 kg)
    • Milling drum assembly trolley to FB1500 (4 ft 11 in)
    • Electrical fuel filter preheating
    • Signal lights for visual “stop” and “go” instructions for the truck driver
    • Pre-equipped for LED lighting balloons
    • Hydraulic filling pump for water tank
    • Powerful high-pressure water cleaner, 150 bar (2,175 psi), 15 l/min (4 gpm)
    • Pneumatic hammer with pick extractor/inserter
    • Hydraulically driven pick extractor drift
    • Additional folding seat for pick change with storage compartment
    • Diesel tank filling pump with 16 ft 5 in (5.00 m) suction hose
    • Monitor system with 2 cameras and screen
    • Monitor system with 5 cameras and 2 displays
    • LED lighting balloon, 24 volt
    • License plate holder with LED lighting
    • Large storage compartment at the rear of the machine

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

Request A Quote

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE Wirtgen
MODEL W 150 XFi

Wirtgen W 150 XFi

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Wirtgen W 150 XFi Compact Milling Machine for Sale

The highly flexible compact milling machines combine the advantages of the small and large milling machine classes. The maneuverable front-loaders are easy to transport and are ideal for use on confined job sites. These powerful machines can mill off entire asphalt pavements cost-effectively. A wide range of different milling drums is available, greatly extending the possible range of applications so that the milling of individual layers and fine milling operations are also among the everyday tasks of these machines.

  • The most powerful cold milling machine in the compact class is the ideal candidate especially for use on major construction sites in restricted space conditions such as in city centers.
  • FCS permits the use of different milling drums offering maximum working widths of up to 1.80 m for increased flexibility and machine utilization.
  • The machine’s low weight and milling drum unit mounted in the center of the machine ensure ideal weight distribution.
  • Flexible adjustment of the extra-large slewing angles and speed of the front-loading conveyor ensure efficient material loading.
  • The state-of-the-art machine management system, LEVEL PRO PLUS leveling system and intuitive operating concept enable efficient one-man operation.
GENERAL INFORMATION
Manufacturer
Wirtgen
Model Year
Model
W 150 XFi
Condition
NEW
Dimensions
Length
45 ft 9 in
Width
7 ft 9 in FB1500 Standard 8 ft 4 in FB1800 Optional
Height
9’10”
Weight
45,966 lbs
Engine
Engine Make
Cummins
Engine Model
QSL 9
Engine Type
US EPA Tier 4f
Cylinders
6
Horsepower
400 HP
Cooling
Water
Displacement
2.4 gal
Fuel Consumption
19.8 GPH (at rated power) 7.9 GPH (during a mixture of job site operations)
Fuel Tank Capacity
214 Gallons
Water Tank Capacity
594.4 gal
Drivetrain
Tracks
4’4” x 10” x 22” (track chains front/back)
Working Speed
0-131 ft/min (1.5 mph) (Milling)
Travel Speed - Forward
0-410 ft/min (4.7 mph)
Speeds
0 to 410 ft/min (4.7 mph) (travel)
Hydraulic
Hydraulic Tank Capacity
31.7 gal
Operational
Cutting Width
4’11” (standard) 5’11” (optional)
Cutting Depth
13”
Cutting Diameter
3 ft 3 in
Conveyor Belt Width
2’2” (Primary) 2’ (Discharge)
Electrical
Power Supply
24 V

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.