Fecon Stumpex 2 Speed

New Fecon Stumpex 2 Speed for Sale

The Fecon STUMPEX stump grinder mounts to skid steers and backhoes with as little as 20 gpm hydraulic output. The STUMPEX’s low RPM and 33,600 ft. per lb. of torque enables it to draw itself down into any species of stump. Low maintenance costs, high production, and less clean-up make the STUMPEX excellent for stump grinding contractors in land clearing, tree care, and municipal applications.

THE STUMPEX DIFFERENCE

• The STUMPEX can draw into stumps 8” – 28” in diameter and up to 20” deep in a single pass
• Larger diameter stumps are processed by making additional passes
• A threaded replaceable cone and staggered AR500 cutting blades grind out stump and root material with minimal discharge

LESS IS MORE

• Fraction of work time compared to conventional stumpers
• No carbide tools to replace
• Low maintenance (greasing and sharpening only)
• Low RPM auger bit (7-16 RPM) leads to easy clean-up and has no high-speed flying debris for a safer work zone
• Mount on skid steers and backhoes with 20-42 GPM / 2,500 to 4,000 psi
• Various models mount on excavators with a 8-20 ton rating

HOW IT WORKS

• Two speed hydraulic motor
• Universal SSL/CTL quick attach built into the body (SHX33 only)
• High-torque, low RPM stump grinding bit

Models

• SHX33SX
• SHX34EXC

• High torque, low RPM stump grinding bit
• Two-speed hydraulic motor
• Durable 3/4” AR500 steel cutting blades
• Bore 28” stumps in single pass
• Replaceable hardened steel cone
• Safer work zone due to no fl ying debris
• Universal SSL/CTL quick built into body (SHX33 only)
• Carrier specifi c hydraulic hoses and couplers (SHX33SX only)
• Fecon Standard Warranty - 6 months / 500 hours
• LESS IS MORE
  • No carbide tools to replace
  • Low maintenance (grease & sharpen every 1,000 stumps)
  • Low RPM auger bit (7-16 rpm) leads to easy clean-up and has no high speed flying debris for a safer work zone
  • Fraction of work time compared to conventional stumpers Replaceable Hardened Steel Cone
• HOW IT WORKS
  • Align Stumpex® vertically over the center of a stump
  • Engage hydraulics and follow Stumpex without pushing or pulling - float function may be used
  • Two-Speed motor will quickly thread cone into stump and then shift automatically into high torque
  • Follow Stumpex® down, ensuring not to push or pull
  • Two-Speed motor will shift back to high speed once through the bottom of the stump
  • Lift Stumpex® vertically from hole and repeat process for stumps larger than 28”