Wirtgen SP 25i

New Wirtgen SP 25i Offset Slipform Paver for Sale

With offset slipform pavers, the concrete is transported into the offset mold via a loading conveyor or a conveyor auger. The offset mold can be mounted on the left or right-hand side of the machine. A number of molds in a wide range of different shapes and sizes are available for individual applications. The offset profiles are continually produced monolithically, with or without reinforcements. Machine features include a top-quality machine control system, a practical steering and drive system and stringline-free concrete paving.

• The multifunctional slipform paver paves a wide range of monolithic profiles up to 6 ft 7 in thick.
• It can be used to easily pave concrete surfaces up to a paving width of 12 ft using both the inset and offset methods (cannot be combined with all options).
• One or two hydraulic parallelogram swing arms at the front and two hydraulically telescoping crawler units at the rear make it possible to pave concrete in an extremely flexible manner.
• The intelligent, electronic steering and control concept means the machine can be driven through very tight turning angles and is highly adaptable to any job site situation.
• The machine can be precisely controlled via stringline scanning, without a stringline using WIRTGEN AutoPilot 2.0, or via 3D applications.

• Exhaust emissions category:  EU Stage 5/US EPA Tier 4f
• Number of crawler tracks: 4
• Operating weight, CE: 29,982 lbs
• Displacement: 246 in³
• Height adjustment, hydraulic: 4 ft 1 in
• Max. working speed: 0 – 50 ft / min
• Max. travel speed: 0 – 115 ft / min
• Max. mold width: 12 ft
• Max. mold height: 6 ft 7 in
• Height adjustment, mechanical: 1 ft 10 in
• Rated power: 115 kW / 154 hp
• Lateral adjustment of mold: 4 ft 7 in

Standard Equipment

• Basic Machine
  • 99 gal fuel tank
  • 66 gal hydraulic oil tank
  • Electrical system (24 V)
  • Hydraulic pump system
  • Pressure-and-flow-controlled hydraulic pump, open circuit, for driving the hydraulic or electric vibrators or for driving the track units in second gear
  • Pressure-controlled hydraulic pump, open circuit, for all cylinder functions
  • Proportionally controlled hydraulic pump, closed circuit, for driving the auger conveyor or belt conveyor
• Main Frame and Height Adjustment
  • Sturdy machine frame for accommodating two track units at the rear and one or two track units at the front
  • Telescoping in length by 2 ft 3 in to adjust the machine to site conditions or to allow mounting of a trimmer
  • Telescoping in width by 2 ft 4 in hydraulically at the rear by extending one or both rear track units to either improve machine stability in offset application when paving specific profiles, or to enable paving molds with a working width of up to 8 ft 2 in to be mounted between the rear track units
• Crawler Units and Chassis Linkage
  • Hydraulically driven track units, 5 ft 1 in long, gear ratio 1:122, including towing device
  • Continuously adjustable paving speed from 0 to 49 ft/min
  • Continuously adjustable transport speed from 0 to 115 ft/min
  • Hydraulic leveling cylinders with a stroke of 4 ft 1 in
• Machine Control, Leveling and Steering
  • Digital control system with LCD display providing the operator with all pertinent information and allowing parameter settings, e.g. free choice of languages (D/GB/F/E/NL), to be made via a menu
  • Proportional electrohydraulic leveling and steering by means of a PLC system including two leveling sensors, two steering sensors and one slope sensor
• Concrete Equipment for Offset Paving
  • The offset paving molds can be mounted on the left or right side of the machine
• Miscellaneous
  • Pre-fitting for installing the WITOS FleetView control unit
  • European design type certification, EuroTest mark and CE conformity

Standard Equipment, can be replaced with optional equipment if desired

• Crawler Units and Chassis Linkage
  • Model with one rigid front track unit connection
  • Three track units fitted with triple-grouser steel track pads
• Machine Control, Leveling and Steering
  • Sensor mounting brackets, adjustable in height and range
• Vibration
  • Hydraulic vibrator drive for up to 5 vibrators
  • Two straight vibrators D66, hydraulically driven
• Concrete Feeding System
  • Belt conveyor 16 ft 1 in x 2 ft with reversible hydraulic drive, hydraulically adjustable
  • Steel chute
• Concrete Equipment for Offset Paving
  • Offset mold mount telescoping hydraulically to one side; stroke: 3 ft 7 in
  • Offset paving mold up to 2 ft wide, max. height of 15.7 in
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • Lighting system including 3 halogen working lights, 24 V

• Crawler Units and Chassis Linkage
  • Model with one pivoting front track unit connection (parallelogram arms)
  • Fourth track unit and two pivoting front track unit connections (parallelogram arm)
  • Three track units fitted with polyurethane track pads
  • Four track units fitted with triple-grouser steel track pads
  • Four track units fitted with polyurethane track pads
  • Extension element for telescoping device of machine frame, front
  • Frame extension elements, rear, for 8 ft 2 in to 12 ft wide paving molds
  • Frame extension elements at front, for molds from 8 ft 2 in – 12 ft width
  • Frame extension elements, front, for 8 ft 2 in to 12 ft wide paving molds
• Machine Control, Leveling and Steering
  • Two slab tracers
  • Third height and steering sensor for paving in corners with tight radii
  • Pre-fitting for 3D leveling
  • Additional slope sensor for 3D leveling
  • Laser transmitter for AutoPilot 2.0 including stand
  • Laser receiver for AutoPilot 2.0
  • Ultrasonic sensor for AutoPilot 2.0
  • Total station Leica iCON robot 50 for AutoPilot 2.0
  • Additional tablet computer with case for AutoPilot 2.0
• Concrete Spreading Equipment for Slab Paving
  • Cross-spreading auger, 8 ft 2 in long, suitable in particular for use with safety barrier molds and trimmer
  • Spreading auger 6.00 ft for molds
  • Spreading auger – extension element 1.00 ft, right-hand pitch
  • Spreading auger – extension element 1.50 ft, right-hand pitch
  • Spreading auger – extension element 2.00 ft, right-hand pitch
  • Spreading auger – extension element 3.00 ft, right-hand pitch
  • Grout box auger without crown – basic width 6.00 ft
  • Grout box auger – extension element 1.00 ft
  • Grout box auger – extension element 1.50 ft
  • Grout box auger – extension element 2.00 ft
  • Grout box auger – extension element 3.00 ft
• Vibration
  • Electric vibrator drive with 10-kVA generator for up to 5 vibrators
  • Hydraulic and electric vibrator drive for up to 5 vibrators
  • Two curved vibrators D66, hydraulically driven
  • Two straight vibrators D66, electrically driven
  • Two curved vibrators (D66), electrically driven
  • Hydraulic vibration, addition (5x)
  • Electric vibration, addition (5x)
  • Straight vibrator D66, hydraulically driven
  • Curved vibrator D66, hydraulically driven
  • Straight vibrator D66, electrically driven
  • Curved vibrator (D66), electrically driven
  • Tamper bar with/without crown – basic width 6 ft
  • Tamper bar – extension element 1.00 ft
  • Tamper bar – extension element 1.50 ft
  • Tamper bar – extension element 2.00 ft
  • Tamper – extension element 3.00 ft
• Concrete Equipment for Slab Paving
  • Paving mold series 1200i – basic width 3.0 ft with ESC
  • One-piece sideplate for paving mold series 1200i
  • Two-piece sideplate for paving mold series 1200i
  • Paving mold series 1200i – extension element 1.0 ft
  • Paving mold series 1200i – extension element 1.5 ft
  • Paving mold series 1200i – extension element 2.0 ft
  • Paving mold series 1200i – extension element 3.0 ft wide
  • Configuration with suspension for paving mold with a working width of more than 6.0 ft
  • Metering gate for molds 3.00 ft
  • Hydraulic height adjustment for metering gate
  • Metering gate – extension element 1.00 ft
  • Metering gate – extension element 1.50 ft
  • Metering gate – extension element 2.00 ft
  • Metering gate – extension element 3.00 ft
  • Super smoother – basic width 6.0 ft
  • Super smoother – extension element 1.00 ft
  • Super smoother – extension element 2.00 ft
• Concrete Feeding System
  • Belt conveyor 19 ft 4 in x 2 ft with reversible hydraulic drive, hydraulically adjustable
  • Belt conveyor 19 ft 8 in x 2 ft, in folding design, with reversible hydraulic drive, hydraulically adjustable
  • Charging auger 15 ft 1 in x 15.7 in with reversible hydraulic drive, hydraulically adjustable
  • Auger conveyor 18 ft 8 in x 15.7 in with reversible hydraulic drive, hydraulically adjustable
  • Steel-rubber chute
• Concrete Equipment for Offset Paving
  • Offset mold mount telescoping hydraulically to both sides; stroke: 3 ft 7 in
  • Offset paving mold from 2 ft – 3 ft 11 in wide
  • Offset paving mold from 3 ft 11 in – 5 ft 11 in wide (max. height of 15.7 in)
  • Offset paving mold up to 2 ft 11 in high, max. base width of 2 ft, including hopper
  • Offset paving mold up to 4 ft 3 in high, max. base width of 2 ft, including hopper
  • Split offset paving mold up to 2 ft wide, max. height of 15.7 in
  • Split offset paving mold from 2 ft to 3 ft 11 in wide, max. height of 15.7 in
  • Split combined offset mold up to 2 ft 6 in in width and a maximum of 15.7 in in height
  • Split combined offset mold up to 3 ft 7 in in width and a maximum of 15.7 in in height
  • Version without offset molds
  • Split offset paving mold up to 2 ft wide, max. height of 15.7 in
  • Split offset paving mold from 2 ft to 3 ft 11 in wide, max height of 15.7 in
  • Profile insert for split combined offset mold up to 2 ft 6 in in width
  • Profile insert for split combined offset mold up to 3 ft 7 in in width
  • Height adapter for split offset paving molds
  • Height-adjustable mold mount with 15.7 in lift for split offset mold
  • Hydraulic quick-change system for offset paving mold (one-piece mold)
  • Additional adapter plate for quick-change system
  • Hydraulic quick-change system for offset paving mold (two-piece mold)
  • Set of hydraulic components for adjusting the sideplate of an EV offset paving mold
  • Set of hydraulic components for adjusting the side header of an AV offset mold
• Offset Trimer
  • Preliminary equipment for installing a trimmer
  • Trimmer, basic width, 2 ft for mounting on the left side
  • Trimmer – extension 8 in wide, for mounting on the left side
  • Trimmer – extension 15.7 in wide, for mounting on the left side
  • Trimmer, basic width, 2 ft for mounting on the right side
  • Trimmer – extension 8 in wide, for mounting on the right side
  • Trimmer – extension 15.7 in wide, for mounting on the right side
• Operator’s Platform
  • Weather umbrella for operator’s platform
  • Weather canopy for operator’s platform, hydraulically telescoping in height
• Miscellaneous
  • Painting in one special color (RAL)
  • Painting in two special colors (RAL)
  • Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
  • High-performance lighting system including 3 LED working lights, 24 V
  • Lighting system including 4 halogen working lights, 24 V
  • High-performance lighting system including 4 LED working lights, 24 V
  • Hydraulic high-pressure water cleaning system with 145 gal plastic tank
  • Additional water pump, 24 V
  • Additional plastic water tank, 145 gal
  • Truck pushing device
  • Stringline tensioning system, complete with 3,280 ft 10 in steel wire rope
  • Additional tensioning winch for stringline tensioning system
  • Stringline tensioning system, complete with 4 x 984 ft nylon rope
  • Radius kit, fiberglass rod as stringline replacement for paving in corners with different radii
  • Machine commissioning (day rate)
  • Export packaging