Wirtgen SP 15i

New Wirtgen SP 15i Offset Slipform Paver for Sale

With offset slipform pavers, the concrete is transported into the offset mold via a loading conveyor or a conveyor auger. The offset mold can be mounted on the left or right-hand side of the machine. A number of molds in a wide range of different shapes and sizes are available for individual applications. The offset profiles are continually produced monolithically, with or without reinforcements. Machine features include a top-quality machine control system, a practical steering and drive system and stringline-free concrete paving.

• The compact slipform paver paves a wide range of monolithic profiles up to 4 ft 3 in thick.
• It can be used to easily pave concrete surfaces up to 7 ft wide (cannot be combined with all options).
• The slipform paver is perfect for job sites that require a high degree of maneuverability, tight turning angles, and maximum flexibility.
• Two crawler units with parallelogram swing arms at the front and a movable crawler unit at the rear offer maximum flexibility and make zero clearance paving possible.
• The machine can be precisely controlled via stringline scanning, without a stringline using WIRTGEN AutoPilot 2.0, or via 3D applications.

• Exhaust emissions category:  EU Stage 5/US EPA Tier 4f
• Number of crawler tracks: 3
• Operating weight, CE: 22,818 lbs
• Displacement: 247 in³
• Height adjustment, hydraulic: 3 ft 3 in
• Max. working speed: 0 – 49 ft / min
• Max. travel speed: 0 – 115 ft / min
• Max. mold width: 5 ft 11 in
• Max. mold height: 4 ft 3 in
• Height adjustment, mechanical: 11 in
• Rated power: 95 kW / 127 hp
• Lateral adjustment of mold: 2 ft 4 in

Standard Equipment

• Basic Machine
  • 58 gal (220 l) fuel tank
  • 58 gal (220 l) hydraulic oil tank
  • Electrical system (24 V)
  • Pressure and flow-controlled hydraulic pump (open circuit) to power the crawler units
  • Pressure and flow-controlled hydraulic pump (open circuit) to power the hydraulic or electric vibrators
  • Pressure-controlled hydraulic pump (open circuit) to power all of the cylinder functions
  • Proportionally controlled hydraulic pump (closed circuit) to power the auger conveyor or belt conveyor
• Main Frame and Height Adjustment
  • Heavy-duty machine frame for accommodating two track units at the front and one track unit at the rear
• Track Units and Chassis Linkage
  • Three hydraulically powered track units, 4 ft 5 in (1.34 m) long; gear ratio 1:42; including towing device
  • Continuously adjustable paving speed from 0 to 49 ft/min (0 to 15 m/min)
  • Continuously adjustable transport speed from 0 to 115 ft/min (0 to 35 m/min)
  • Three hydraulic leveling cylinders with a stroke of 3 ft 3 in (1.00 m)
  • The rear track unit can be moved along the rear suspension in order to select the most favorable position for the particular application
• Machine Control, Leveling, and Steering
  • Digital control system with LCD display that provides the operator with all of the relevant information and allows parameters such as the free choice of language (D/GB/F/E/NL) to be adjusted via a menu
  • Proportional electrohydraulic leveling and steering by means of a PLC system including two leveling sensors, two steering sensors, and one slope sensor
  • Sensor mounting brackets, adjustable in height and range
• Concrete Equipment for Offset Paving
  • The offset paving molds can be mounted on the left or right side of the machine
  • The mold mount can be telescoped outwards by 2 ft 3 in (0.70 m) on each side
• Miscellaneous
  • Water tank with 42 gal (160 l) capacity and additional water tank with 96 gal (290 l) capacity
  • Pre-fitting for installing the WITOS FleetView control unit
  • European design type certification, EuroTest mark and CE conformity

Standard Equipment, can be replaced with optional equipment if desired

• Track Units and Chassis Linkage
  • Model with one rigid and one pivoting front track unit connection (parallelogram swing arm)
  • Three track units fitted with triple-grouser steel track pads
• Vibration
  • Hydraulic vibrator drive for up to 6 vibrators
  • Two straight D66 vibrators, hydraulically powered
• Concrete Feeding System
  • Belt conveyor (16 ft 1 in x 2 ft (4.90 m x 0.60 m)) with reversible hydraulic drive, hydraulically adjustable
  • Steel chute
• Concrete Equipment for Offset Paving
  • Offset paving mold up to 2 ft (0.60) wide, max. height of 15.7 in (1.40 m)
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Lighting system including 3 halogen working lights, 24 V

• Track Units and Chassis Linkage
  • Model with one rigid (spacer) and one pivoting front track unit connection (parallelogram swing arm)
  • Two pivoting front track units (parallelogram swing arms)
  • Three track units fitted with polyurethane track pads
  • Hydraulic positioning feature for the rear track unit
• Machine Control, Leveling, and Steering
  • Two slab tracers
  • Third height and steering sensor for paving in corners with tight radii
  • Pre-fitting for 3D leveling
  • AutoPilot 2.0 (868-870 MHz) with Field Rover
  • AutoPilot 2.0 (902-928 MHz) with Field Rover
  • Training for AutoPilot 2.0
  • Laser transmitter for AutoPilot 2.0 including stand
  • Laser receiver for AutoPilot 2.0
  • Ultrasonic sensor for AutoPilot 2.0
  • Total station Leica iCON robot 50 for AutoPilot 2.0
  • Additional tablet computer with case for AutoPilot 2.0
• Vibration
  • Electric vibrator drive with 10-kVA generator for up to 6 vibrators
  • Two curved D66 vibrators, hydraulically powered
  • Two straight D66 vibrators, electrically powered
  • Two curved D66 vibrators, electrically powered
  • Straight D66 vibrator, hydraulically powered
  • Curved D66 vibrator, hydraulically powered
  • Straight D66 vibrator, electrically powered
  • Curved D66 vibrator, electrically powered
• Concrete Feeding System
  • Belt conveyor (18 ft 1 in x 2 ft in (5.50 m x 0.60 m)) folding design with reversible hydraulic drive, fully hydraulically adjustable
  • Auger conveyor (15 ft 1 in x 15.7 in (4.60 m x 0.40 m)) with reversible hydraulic drive, hydraulically adjustable
  • Steel-rubber chute
• Concrete Equipment for Offset Paving
  • Offset paving mold from 2 ft-3 ft 11 in (0.60 m-1.20 m) wide (max. height of 15.7 in (0.40 m))
  • Offset paving mold from 3 ft 11 in – 5 ft 11 in (1.20 m-1.80 m) wide (max. height of 15.7 in (0.40 m))
  • Offset paving mold up to 2 ft 11 in (0.90 m) high, max. base width of 2 ft (0.60 m), including hopper
  • Offset paving mold up to 4 ft 3 in (1.30 m) high, max. base width of 2 ft (0.60 m), including hopper
  • Split offset paving mold up to 2 ft (0.60 m) wide, max. height of 15.7 in (0.40 m)
  • Split offset paving mold from 2 ft to 3 ft 11 in (0.60 m-1.20 m) wide, max. height of 15.7 in (0.40 m)
  • Split combined offset mold up to 2 ft 6 in (0.75 m) in width and a maximum of 15.7 in (0.40 in height)
  • Split combined offset mold up to 3 ft 7 in (1.10 m) in width and a maximum of 15.7 in (0.40 in height)
• Concrete Unit
  • Offset paving mold up to 2 ft 11 in (0.90 m) high, max. base width of 2 ft (0.60 m), including hopper
  • Offset paving mold up to 4 ft 3 in (1.30 m) high, max. base width of 2 ft (0.60 m), including hopper
  • Split offset paving mold up to 2 ft (0.60 m) wide, max. height of 15.7 in (0.40 m)
  • Split offset paving mold from 2 ft to 3 ft 11 in (0.60 m – 1.20) wide, max. height of 15.7 in (0.40 m)
  • Bottom part for split offset paving mold (AV) 2 ft wide (max. height of 15.7 in (0.40 m))
  • Bottom part for split offset paving mold (AV) 2 ft to 3 ft 11 in  (0.60 m-1.20 m) wide (max. height of 15.7 in (0.40 m))
  • Split combined offset mold up to 2 ft 6 in (0.75 m) in width and a maximum of 15.7 in (0.40 m) in height
  • Split combined offset mold up to 3 ft 7 in (1.10 m) in width and a maximum of 15.7 in (0.40 m) in height
  • Profile insert for split combined offset mold up to 2 ft 6 in (0.75 in) in width
  • Profile insert for split combined offset mold up to 3 ft 7 in (1.10 m) in width
  • Set of hydraulic components for telescoping the offset mold mount
  • Height adapter for split offset paving molds
  • Height-adjustable mold mount with 15.7 in (0.40 m) lift for offset mold
  • Hydraulic quick-change system for offset paving mold (one-piece mold)
  • Additional adapter plate for quick-change system
  • Hydraulic quick-change system for offset paving mold (two-piece mold)
  • Set of hydraulic components for adjusting the sideplate of an EV offset paving mold
  • Set of hydraulic components for adjusting the side header of an AV offset mold
• Offset Trimmer
  • Trimmer, basic width, 2 ft (0.60 m), for left-side mounting
  • Trimmer, basic width, 2 ft (0.60 m), for right-side mounting
  • Trimmer – extension 8 in (0.20 m) wide, for left-side mounting
  • Trimmer – extension 15.7 in (0.40 m) wide, for left-side mounting
  • Trimmer – extension 8 in (0.20 in) wide, for right-side mounting
  • Trimmer – extension 15.7 in (0.40 m) wide, for right-side mounting
• Operator’s Platform
  • Weather canopy for operator’s platform
• Miscellaneous
  • Painting in one special color (RAL)
  • Painting in two special colors (RAL)
  • Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
  • Model without WITOS FleetView
  • High-performance lighting system including 3 LED working lights, 24 V
  • High-pressure cleaner
  • Large storage compartment at the rear of the machine
  • Stringline tensioning system, complete, with 3,281 ft (1,000 m) steel wire rope
  • Additional tensioning winch for stringline tensioning system
  • Stringline tensioning system, complete with 4 x 984 ft (4 x 300 m) nylon rope
  • Radius kit, fiberglass rod as stringline replacement for paving in corners with different radii
  • Machine startup (day rate)