• Exhaust emissions category:  EU Stage 5/US EPA Tier 4f
• Number of crawler tracks: 4
• Paving width: 12’-32’
• Paving height: 0-18”
• Paving width with crown: 12’-32’
• Paving width without crown: 6’-32’
• Paving speed: B1: 0-39 ft/min, B4: 0-23 ft/min
• Travel speed: 0 – 72 ft / min
• Displacement: 543 in³
• Machine weight: 52,910-143,300 lbs
• Height adjustment, mechanical: 18 in
• Rated power: 231 kW / 310 hp

Standard equipment

• Basic Machine
  • Hydraulic system including an adequately sized hydraulic oil tank and a pump transfer gearbox with four output shafts and the pumps required for the machine’s basic equipment package
  • Cooling system with temperature-controlled fan speed
  • Electrical system (24 V)
  • Fuel tank 132 gal (500 l)
• Main Frame and Height Adjustment
  • Heavy-duty steel frame, telescoping in stages by total 9 ft (2.75 m) on both sides, can be optionally extended by fixed extension pieces
  • The machine frame is pre-fitted with multiple mounting points for the modular addition of a variety of equipment features
  • Four hydraulic leveling cylinders with a stroke of 3 ft 3 in (1.00 m)
• Machine Control, Leveling, and Steering
  • WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
  • Error messages are displayed on the machine’s control screen
  • The existing CAN bus system can be expanded to customer specifications
  • ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
  • Proportional electrohydraulic leveling and steering by means of a PLC system including four leveling sensors and two steering sensors
  • Sensor mounting brackets, adjustable in height and range
• Operator’s Platform
  • Ergonomically designed operator’s platform providing a perfect view of the paving process
  • Three control panels with clear, language-independent labeling for ergonomic operation
  • Control panel 1 for machine setup according to site requirements
  • Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu
  • The control panel can be adjusted to all directions of travel and paving configurations
  • Control panel 3 for controlling the concrete equipment
  • Two control panels can be stored in the engine compartment; the third control panel can be protected against vandalism and weather by means of a lockable cover
  • Automatic recognition of each machine configuration provides easy orientation for the machine operator
• Miscellaneous
  • Paving Plus package: pivot angle display, speed indicator, and fully digital Ackermann steering
  • Comprehensive toolkit in lockable toolbox
  • Comprehensive safety package with EMERGENCY STOP switches
  • Filling of the machine’s hydraulic system with mineral hydraulic oil
  • Pre-fitting for installing the WITOS FleetView control unit

Standard equipment, can be replaced with optional equipment if desired

• Main Frame and Height Adjustment
  • Frame elements for mechanical telescoping in increments to working widths of up to 20 ft 6 in (6.25 m)
• Crawler Units and Chassis Linkage
  • Four height-adjustable B4 track units, 14 in (350 mm) wide, including cylinder drives
• Vibration
  • Hydraulic vibrator drive for max. 12 vibrators
  • Ten curved vibrators D66, hydraulically driven
• Concrete Equipment for Slab Paving
  • Paving mold series 1300 wi, without crown – basic width 12 ft
  • One-piece side header for mold series 1300 wi/1310 wi
  • Flat inserts for the outer edges of the mold series 1300 wi
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Lighting system including four halogen working lights, 24 V

• Main Frame and Height Adjustment
  • Frame elements or mechanical telescoping in increments to working widths of up to 26 ft 3 in (8.00 m)
  • Frame elements for mechanical telescoping in increments to working widths of up to 32 ft (9.50 m)
  • Frame elements for continuous hydraulic telescoping to working widths of up to 20.5 ft (6.25 m), including extension elements
  • Frame elements for continuous hydraulic telescoping to working widths of up to 26 ft 3 in (8.00 m)
  • Frame elements for continuous hydraulic telescoping to working widths of up to 32 ft (3.66 m)
• Crawler units and Chassis Linkage
  • Four height-adjustable B4 track units, 14 in (350 mm) wide, including hydraulic rotational drives
• Machine Control, Leveling, and Steering
  • Cross-slope sensor for machine
  • Automatic crown adjustment
  • Two slab tracers
  • Four slab tracers
  • Control console for manual track unit steering
  • Preliminary equipment for 3-D leveling with Leica Topcon or Trimble
  • Additional slope sensors for 3-D leveling
• Concrete Spreading Equipment for Slab Paving
  • Spreading auger without crown – basic width 12 ft
  • Split spreader auger with/without crown – basic width 12 ft
  • Spreading plow – basic width 12 ft
  • Spreading auger – extension element 1.00 ft, right-hand pitch
  • Spreading auger – extension element 1.50 ft, right-hand pitch
  • Spreading auger – extension element 2.00 ft, right-hand pitch
  • Spreading auger – extension element 4.00 ft, right-hand pitch
  • Spreading auger – extension element 1.00 ft, left-hand pitch
  • Spreading auger – extension element 1.50 ft, left-hand pitch
  • Spreading auger – extension element 2.00 ft, left-hand pitch
  • Spreading auger – extension element 4.00 ft, left-hand pitch
  • Spreading auger – extension element 1.00 ft
  • Spreading auger – extension element 1.50 ft
  • Spreading auger – extension element 2.00 ft
  • Spreading auger – extension element 4.00 ft
• Vibration
  • Hydraulic vibrator drive for max. 18 vibrators
  • Hydraulic vibrator drive for max. 24 vibrators
  • Electric vibrator drive with 60 kVA generator for max. 12 vibrators
  • Electric vibrator drive with 60 kVA generator for max. 20 vibrators
  • Electric vibrator drive with 60 kVA generator for max. 28 vibrators
  • Ten curved vibrators D76, electrically driven
  • Tamper bar without crown – basic width 12 ft
  • Tamper bar with/without crown – basic width 12 ft
  • Curved vibrator D66, hydraulically driven
  • Curved vibrator D76, electrically driven
  • Tamper bar – extension element 1.00 ft
  • Tamper bar – extension element 1.50 ft
  • Tamper bar – extension element 2.00 ft
  • Tamper bar – extension element 4.00 ft
• Concrete Equipment for Slab Paving
  • Metering gate for molds without crown – basic width 12 ft
  • Split metering gate for molds with/without crown – basic width 12 ft
  • Automatic metering gate control for concrete paving mold
  • Paving mold series 1300 wi, with crown – basic width 12 ft – including hydraulic middle suspension
  • Two-piece side header for start of shift with mold series 1300 wi/1310 wi
  • Paving mold series 1300 wi – extension element 1.00 ft
  • Paving mold series 1300 wi – extension element 1.50 ft
  • Paving mold series 1300 wi – extension element 2.00 ft
  • Paving mold series 1300 wi – extension element 4.00 ft
  • ESC “Edge Slump Control” inserts for the outer edges of the mold series 1300 wi
  • Profile insert for series 1300 wi/1310 wi
  • Automatic dowel bar inserter (DBI) for use without crown – basic width 12 – mechanically telescoping
  • Automatic dowel bar inserter (DBI) for use with crown – basic width 14 ft – mechanically telescoping
  • Base group for dowel bar inserter (DBI) for paving width up to 12 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 14 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 18 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 22 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 26 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 30 ft
  • Frame extension + electrical control for dowel bar inserter (DBI)
  • Dowel bar inserter (DBI) – extension element 1.00 ft
  • Dowel bar inserter (DBI) – extension element 1.50 ft
  • Dowel bar inserter (DBI) – extension element 2.00 ft
  • Dowel bar inserter (DBI) – extension element 4.00 ft
  • Load brackets as modification aid for altering the width of the dowel inserter (DBI)
  • DBI self-loading device including diesel-powered hydraulic unit
  • Oscillating beam without crown – basic width 12 ft
  • Oscillating beam with/without crown – basic width 12 ft
  • Oscillating beam – extension element 1.00 ft
  • Oscillating beam – extension element 1.50 ft
  • Oscillating beam – extension element 2.00 ft
  • Oscillating beam – extension element 4.00 ft
  • Super smoother – basic width 12 ft
  • Super smoother – extension element 1.00 ft
  • Super smoother – extension element 1.50 ft
  • Super smoother – extension element 2.00 ft
  • Super smoother – extension element 4.00 ft
  • One side tie bar drive-in device for straight tie bars, max. Ø ¾”, length 2.50 ft
  • Two side tie bar drive-in devices for straight tie bars, max. Ø ¾”, length 2.50 ft
  • Transport frame for oscillating beam and super smoother as transport unit
• Operator’s Platform
  • Weather canopy for operator’s platform, hydraulically telescoping in height
  • Weather canopy for operator’s platform, hydraulically telescoping in height, with LED lighting
  • Extension of walkway allowing the operator to pass from one side of the machine to the other
• Miscellaneous
  • Painting in one special color (RAL)
  • Painting in two special colors (RAL)
  • Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
  • Model without WITOS FleetView
  • High-performance lighting system including eight LED working lights, 24 V
  • Hydraulic high-pressure water cleaning system with 145 gal (550 L) plastic tank
  • Two hydraulic high-pressure water cleaning systems with two 145 gal (550 L) plastic tanks
  • Additional electrical water pump, 24 V, with 32 ft 10 in (10.00 m) hose and spray gun with handle
  • Additional plastic water tank, 145 gal (550 l)
  • Self-leveling feature for transport mode
  • Rotating beacon, halogen 24 V, with magnetic base
  • Two flashing beacons, 24 V, with magnetic base
  • Two LED floodlights including power generator (230 V)
  • Two LED floodlights including power generator (110 V)
  • Stringline tensioning system, complete with 3,280 ft (1,000 m) steel wire rope
  • Additional tensioning winch for stringline tensioning system
  • Stringline tensioning system, complete with 4 x 984 ft (4 x 300 m) nylon rope
  • Machine commissioning (day rate)
  • Export packaging

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.