• Exhaust emissions category:  EU Stage 5/US EPA Tier 4f
• Number of crawler tracks: 4
• Paving width: 6’6”-24’
• Paving height: 0-18”
• Paving width with crown: 12’-24’
• Paving width without crown: 6’6”-24’
• Paving speed: B0: 0-20 ft/min B1: 0-23 ft/min
• Travel speed: B0: 0 – 69 ft / min B1 0-77 ft/min
• Displacement: 369.5 Imp.gal
• Machine weight: 37,500-99,200 lbs.
• Height adjustment, mechanical: 17 in
• Rated power: 180 kW / 241 hp
•  

Standard Equipment

• Basic Machine
  • Basic machine consisting of engine station and machine frame telescoping mechanically to the left and right for accommodating slab paving molds between the track units, including pre-fitting for four track units
  • Fuel tank 106 gal (400 l)
  • Electrical system (24 V)
  • Cooling system with temperature-controlled fan speed
  • Hydraulic system including an adequately sized hydraulic oil tank and a pump transfer gearbox with two output shafts and the pumps required for the machine’s basic equipment package
• Main Frame and Height Adjustment
  • Heavy-duty steel frame which can be telescoped to either side by 2 ft 6 in (750 mm), enabling a total telescoping range of 5 ft 4 in (1.63 m).  Optional expansion using fixed extension pieces.
  • The machine frame is pre-fitted with multiple mounting points for the modular addition for a variety of equipment features
  • Concrete equipment between 6 ft 6 in and 13 ft 1 in can be connected to the frame, optionally extendable to 24 ft (depends on equipment, up to 20 ft with DBI)
• Crawler Units and Chassis Linkage
  • Paving speed of B0 track unit: 0-20 ft/min (0-6 m/min)
  • Transport speed of B0 track unit: 0-69 ft/min (0-21 m/min)
• Machine Control, Leveling, and Steering
  • WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
  • Error messages are displayed on the machine’s control screen
  • The existing CAN bus system can be expanded to customer specifications
  • ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
  • Proportional electrohydraulic leveling and steering by means of a PLC system including four leveling sensors and two steering sensors
  • Sensor mounting brackets, adjustable in height and range
  • Four leveling hydraulic cylinders with a stroke of 3 ft 6 in (1.10 m)
• Operator’s Platform
  • Ergonomically designed operator’s platform providing a perfect view of the paving process
  • Three control panels with clear, language-independent labeling for ergonomic operation
  • Control panel 1 for machine setup according to site requirements
  • Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu; the control panel can be adjusted to all directions of travel and paving configurations
  • Control panel 3 for controlling the concrete equipment
  • Two control panels can be stored in the engine compartment; the third control panel can be protected against vandalism and weather by means of a lockable cover
  • Automatic recognition of each machine configuration provides easy orientation for the machine operator
• Miscellaneous
  • Paving Plus package: pivot angle display, speed indicator, and fully digital Ackermann steering
  • Comprehensive toolkit in lockable toolbox
  • Comprehensive safety package with EMERGENCY STOP switches
  • Pre-fitting for installing the WITOS FleetView control unit
  • Filling of the machine’s hydraulic system with mineral hydraulic oil

Standard Equipment, can be replaced with optional equipment if desired

• Main Frame and Height Adjustment
  • Frame elements for mechanical telescoping in increments to working widths of up to 13 ft 1 in
• Crawler Units and Chassis Linkage
  • Model with four B0 track units (four rollers), fitted with triple-grouser steel track pads
  • Model with two manually pivoting track unit connections each, front and rear
• Machine Control, Leveling, and Steering
  • Cylinder drives for model with four B0 track unit
• Vibration
  • Hydraulic vibrator drive for max. 12 vibrators
  • Ten curved vibrators D66, hydraulically driven
• Concrete Equipment for Slab Paving
  • Paving mold series 1300 wi, without crown – basic width 12 ft
  • One-piece side header for mold series 1300 wi/1310 wi
  • Flat inserts for the outer edges of the mold series 1300 wi
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Lighting system including four halogen working lights, 24 V

• Main Frame and Height Adjustment
  • Frame elements for continuous hydraulic telescoping to working widths of up to 20 ft
  • Frame elements for continuous hydraulic telescoping to working widths of up to 24 ft, including extension elements
• Crawler Units and Chassis Linkage
  • Model with four B0 track units (four rollers), fitted with polyurethan track pads
  • Model with four B1 track units (six rollers), with triple grouser steel track pads
  • Model with four B1 track units (six rollers), fitted with polyurethan track pads
  • Model with two hydraulically pivoting track unit connections each, front and rear
  • Additional control console for track unit adjustment
• Machine Control, Leveling, and Steering
  • Cylinder drives for model with four B1 track units
  • Cross-slope sensor
  • Two slab tracers
  • Four slab tracers
  • Control console for manual track unit steering
  • Pre-fitting for 3-D leveling
  • Additional slope sensors for 3-D leveling
• Concrete Spreading Equipment for Slab Paving
  • Spreading auger without crown – basic width 12 ft
  • Split spreader auger with/without crown – basic width 12 ft
  • Spreading plow – basic width 12 ft
  • Spreading auger – extension element 1.00 ft, right-hand pitch
  • Spreading auger – extension element 1.50 ft, right-hand pitch
  • Spreading auger – extension element 2.00 ft, right-hand pitch
  • Spreading auger – extension element 4.00 ft, right-hand pitch
  • Spreading auger – extension element 1.00 ft, left-hand pitch
  • Spreading auger – extension element 1.50 ft, left-hand pitch
  • Spreading auger – extension element 2.00 ft, left-hand pitch
  • Spreading auger – extension element 4.00 ft, left-hand pitch
  • Spreading plow – extension element 1.00 ft
  • Spreading plow – extension element 1.50 ft
  • Spreading plow – extension element 2.00 ft
  • Spreading plow – extension element 4.00 ft
• Vibration
  • Straight vibrator D66, electrically driven
  • Curved vibrator D66, hydraulically driven
  • Curved vibrator D76, electrically driven
• Concrete Equipment for Slab Paving
  • Metering gate for molds without crown – basic width 12 ft
  • Split metering gate for molds with/without crown – basic width 12 ft
  • Automatic metering gate control for concrete paving mold
  • Metering gate – extension element 1.00 ft
  • Metering gate – extension element 1.50 ft
  • Metering gate – extension element 2.00 ft
  • Metering gate – extension element 4.00 ft
  • Paving mold series 1300 wi, with crown – basic width 12 ft
  • Two-piece side header for start of shift with mold series 1300 wi/1310 wi
  • Version without side header
  • ESC “Edge Slump Control” inserts for the outer edges of the mold series 1300 wi
  • Paving mold series 1300 wi – extension element 1.00 ft
  • Paving mold series 1300 wi – extension element 1.50 ft
  • Paving mold series 1300 wi – extension element 2.00 ft
  • Paving mold series 1300 wi – extension element 4.00 ft
  • Profile insert for series 1300 wi/1310 wi
  • Automatic dowl bar inserter (DBI) for use without crown – basic width 12 ft
  • Automatic dowl bar inserter (DBI) for use with crown – basic width 12 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 12 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 14 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 18 ft
  • Base group for dowel bar inserter (DBI) for paving width up to 20 ft
  • Electrical control for dowel bar inserter (DBI) and/or longitudinal tie bar inserter (TBI) + chassis extension for dowel bar inserter (DBI) and/or longitudinal tie bar inserter (TBI)
  • Dowel bar inserter (DBI) – extension element 1.00 ft
  • Dowel bar inserter (DBI) – extension element 1.50 ft
  • Dowel bar inserter (DBI) – extension element 2.00 ft
  • Dowel bar inserter (DBI) – extension element 4.00 ft
  • Load brackets as modification aid for altering the width of the dowel bar inserter (DBI)
  • DBI self-loading device including diesel-powered hydraulic unit
  • Oscillating beam without crown – basic width 12 ft
  • Oscillating beam with/without crown – basic width 12 ft
  • Oscillating beam – extension element 1.00 ft
  • Oscillating beam – extension element 1.50 ft
  • Oscillating beam – extension element 2.00 ft
  • Oscillating beam – extension element 4.00 ft
  • Super smoother – basic width 12 ft
  • Super smoother – extension element 1.00 ft
  • Super smoother – extension element 1.50 ft
  • Super smoother – extension element 2.00 ft
  • Super smoother – extension element 4.00 ft
  • Grout box auger without crown – basic width 12 ft
  • Split grout box auger with/without crown – basic width 12 ft
  • Grout box auger – extension element 1.00 ft
  • Grout box auger – extension element 1.50 ft
  • Grout box auger – extension element 2.00 ft
  • Grout box auger – extension element 4.00 ft
  • Tamper bar without crown – basic width 12 ft
  • Tamper bar with/without crown – basic width 12 ft
  • Tamper bar – extension element 1.00 ft
  • Tamper bar – extension element 1.50 ft
  • Tamper bar – extension element 2.00 ft
  • Tamper bar – extension element 4.00 ft
  • One side tie bar drive-in device for straight tie bars, max Ø ¾ in (20 mm), length 2.50 ft (760 mm)
  • Two side tie bar drive-in devices for straight tie bars, max Ø ¾ in, length 2.50 ft (760 mm)
  • Transport frame for oscillating beam and super smoother as transport unit
• Concrete Equipment for Offset Paving
  • Offset paving mold up to 2 ft (0.60 m) wide, max. height of 16 in (0.40 m)
  • Offset paving mold from 2 ft-3 ft 11 in (0.60-1.20 m) wide (max. height of 16 in (0.40 m))
  • Offset paving mold from 3 ft 11 in-5 ft 11 in (1.20 m-1.80 m) wide (max height of 16 in (0.40))
  • Offset paving mold up to 2 ft 11 in (0.90 m) high, max. base width of 2 ft, including hopper
  • Offset paving mold up to 4 ft 3 in high, max. base width of 2 ft (0.60 m), including hopper
  • Split offset paving mold up to 2 ft (0.60 m) wide, max. height of 16 in (0.40 m)
  • Split offset paving mold from 2 ft to 3 ft 11 in (0.60 m-1.20 m) wide, max. height of 16 in (0.40 m)
  • Bottom part for split offset paving mold (AV) up to 2 ft (0.60 m) wide (max. height of 16 in (0.40 m))
  • Bottom part for split offset paving mold (AV) from 2 ft to 3 ft 11 in (0.60-1.20 m) (max. height of 16 in (0.40 m))
  • Rigid mount for offset paving mold
  • Set of hydraulic components for adjusting the side plate of an EV offset paving mold
  • Set of hydraulic components for adjusting the side header of an AV offset mold
• Concrete Feeding System
  • Belt conveyor 19 ft 8 in x 2 ft (6.00 m x 0.60 m), in folding design, with reversible hydraulic drive, hydraulically adjustable
  • Charging auger 15 ft 1 in x 16 in (4.60 m x 0.40 m) with reversible hydraulic drive, hydraulically adjustable
  • Auger conveyor 18 ft 8 in x 16 in (5.70 m x 0.40 m) with reversible hydraulic drive, hydraulically adjustable
  • Steel chute
  • Steel-rubber chute
• Offset Trimmer
  • Trimmer, basic width 2 ft (0.60 m), for mounting on the left side
  • Trimmer – extension 8 in (0.20 m) wide, for mounting on the left side
  • Trimmer – extension 16 in (0.40 m) wide, for mounting on the left side
  • Trimmer, basic width 2 ft (0.60 m), for mounting on the right side
  • Trimmer – extension 8 in (0.20 m) wide, for mounting on the right side
  • Trimmer – extension 16 in (0.40 m) wide, for mounting on the right side
• Operator’s Platform
  • Weather canopy for operator’s platform with manual fold-down feature
  • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 19 ft 7 in (6.00 m)
  • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 24 ft 6 in (7.50 m)
• Miscellaneous
  • Painting in one special color (RAL)
  • Painting in two special colors (RAL)
  • Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
  • Model without WITOS FleetView
  • High-performance lighting system including eight LED working lights, 24 V
  • Hydraulic high-pressure water cleaning system with 145 gal (550 l) lastic tank
  • Additional plastic water tank, 145 gal (550 l)
  • Additional electrical water pump, 24 V, with 32 ft 10 in (10.00 m) hose and spray gun with handle
  • Self-leveling feature for transport mode
  • Rotating beacon, halogen 24 V, with magnetic base
  • Two flashing beacons, 24 V, with magnetic base
  • Automatic crown adjustment
  • Two LED floodlights including power generator (230 V)
  • Two LED floodlights including power generator (110 V)
  • High-performance lighting system including four LED working lights, 24 V, for illuminating the compaction compartment
  • Crane system for dowl bar packs, driven by means of a chain hoist
  • Hydraulically driven crane system
  • Stringline tensioning system, complete with 3,280 ft (1,000 m) steel wire rope
  • Additional tensioning winch for stringline tensioning system
  • Stringline tensioning system, complete with 4 x 984 ft (4 x 30 m) nylon rope
  • Radius kit, fiberglass rod as stringline replacement for paving in corners with different radii
  • Machine commissioning (day rate)
  • Export packaging

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.