• Exhaust emissions category:  EU Stage 5/US EPA Tier 4f
• Number of crawler tracks: 2
• Paving width: 12’-24’
• Paving height: 0-18”
• Paving speed: 0-20 ft/min
• Travel speed: 0 – 18 3/ min
• Displacement: 369.5 in³
• Machine weight: 52,910-74,957 lbs.
• Height adjustment, mechanical: 17 in
• Rated power: 180 kW / 241 hp

Standard Equipment

• Basic Machine
  • Basic machine consisting of engine station and machine frame telescoping mechanically to the left and right for accommodating slab paving molds between the track units, including pre-fitting for two track units
  • Fuel tank 106 gal (400 l)
  • Electrical system (24 V)
  • Cooling system with temperature-controlled fan speed
  • Hydraulic system including an adequately sized hydraulic oil tank and a pump transfer gearbox with two output shafts and the pumps required for the machine’s basic equipment package
• Main Frame and Height Adjustment
  • Heavy-duty steel frame which can be telescoped to either side b y2 ft 8 in (810 mm), enabling a total telescoping range of 5 ft 4 in (1,630 mm).  Optional expansion using fixed extension pieces
  • The machine frame is pre-fitted with multiple mounting points for the modular addition of a variety of equipment features
  • Concrete equipment between 6 ft 6 in and 13 ft 1 in can be connected to the frame, optionally extendable to 24 ft
• Crawler Unit and Crawler Unit Connections
  • Paving speed of B1 track unit: 0-20 ft/min (0-6 m/min)
  • Transport speed of B1 track unit: 0-59 ft/min (0-18 m/min)
• Machine Control, Leveling, and Steering
  • WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
  • Error messages are displayed on the machine’s control screen
  • The existing CAN bus system can be expanded to customer specifications
  • ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
  • Proportional electrohydraulic leveling and steering by means of a PLC system including four leveling sensors and two steering sensors
  • Sensor mounting brackets, adjustable in height and range
  • An electronic slope sensor enables paving width a working with of 13 ft (3.96 m) with a stringline on only one side
  • Four leveling hydraulic cylinders with 3 ft 6 in (1.10 m) stroke
• Operator’s Platform
  • Ergonomically designed operator’s platform providing a perfect view of the paving process
  • Three control panels with clear, language-independent labeling for ergonomic operation
  • Control panel 1 for machine setup according to site requirements
  • Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu; the control panel can be adjusted to all directions of travel and paving configurations
  • Control panel 3 for controlling the concrete equipment
  • Two control panels can be stored in the engine compartment; the third control panel can be protected against vandalism and weather by means of a lockable cover
  • Automatic recognition of each machine configuration provides easy orientation for the machine operator
• Miscellaneous
  • Paving Plus package: pivot angle display, speed indicator, and fully digital Ackermann steering
  • Comprehensive toolkit in lockable toolbox
  • Comprehensive safety package with EMERGENCY STOP switches
  • Pre-fitting for installing the WITOS FleetView control unit
  • Filling of the machine’s hydraulic system with mineral hydraulic oil

Standard Equipment, can be replaced with optional equipment if desired

• Main Frame and Height Adjustment
  • Frame elements for mechanical telescoping in increments of 2 ft 6 in (0.75 m)
• Crawler Unit and Crawler Unit Connections
  • Model with two B1 track units (ten rollers), fitted with triple-grouser steel track pads
• Vibration
  • Hydraulic vibrator drive for max. 12 vibrators
  • Ten curved vibrators D66, hydraulically driven
• Concrete Equipment for Carriageway Paving
  • Paving mold series 1300 wi, without crown – basic width 12 ft
  • One-piece side header for mold series 1300 wi/1310 wi)
  • Flat inserts for the outer edges of the mold series 1300 wi
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Lighting system including four halogen working lights, 24 V

• Main Frame and Height Adjustment
  • Frame elements for continuous hydraulic telescoping to working widths of up to 20 ft
  • Frame elements for continuous hydraulic telescoping to working widths of up to 24 ft, including extension elements
• Concrete Spreading Equipment for Slab Paving
  • Spreading auger without crown – basic width 12 ft
  • Split spreader auger with/without crown – basic width 12 ft
  • Spreading auger – extension element 1.00 ft, right-hand pitch
  • Spreading auger – extension element 1.50 ft, right-hand pitch
  • Spreading auger – extension element 2.00 ft, right-hand pitch
  • Spreading auger – extension element 4.00 ft, right-hand pitch
  • Spreading auger – extension element 1.00 ft, left-hand pitch
  • Spreading auger – extension element 1.50 ft, left-hand pitch
  • Spreading auger – extension element 2.00 ft, left-hand pitch
  • Spreading auger – extension element 4.00 ft, left-hand pitch
  • Spreading plow – basic width 12 ft
  • Spreading plow – extension element 1.00 ft
  • Spreading plow – extension element 1.50 ft
  • Spreading plow – extension element 2.00 ft
  • Spreading plow – extension element 4.00 ft
• Crawler Units and Chassis Linkage
  • Model with two B1 track units (ten rollers), fitted with polyurethane trac kpads
• Machine Control, Leveling, and Steering
  • Cross-slope sensor
  • Two slab tracers
  • Four slab tracers
  • Control console for manual track unit steering
  • Pre-fitting for 3-D leveling
  • Additional slope sensors for 3-D leveling
• Vibration
  • Hydraulic vibrator drive for max. 18 vibrators
  • Electric vibrator drive with 40 kVA generator for max. 18 vibrators
  • Electric vibrator drive with 40 kVA generator for max. 24 vibrators
  • Ten curved vibrators D76, electrically driven
  • Straight vibrator D66, hydraulically driven
  • Straight vibrator D66, electrically driven
  • Curved vibrator D66, hydraulically driven
  • Curved vibrator D76, electrically driven
• Concrete Equipment for Slab Paving
  • Metering gate for molds without crown – basic width 12 ft
  • Split metering gate for molds with/without crown – basic width 12 ft
  • Metering gate – extension element 1.00 ft
  • Metering gate – extension element 1.50 ft
  • Metering gate – extension element 2.00 ft
  • Metering gate – extension element 4.00 ft
  • Paving mold series 1300 wi, with crown – basic width 12 ft
  • Two-piece side header for start of shift with mold series 1300 wi/1310 wi
  • ESC “Edge Slump Control” inserts for the outer edges of the mold series 1300 wi
  • Paving mold series 1300 wi – extension element 1.00 ft
  • Paving mold series 1300 wi – extension element 1.50 ft
  • Paving mold series 1300 wi – extension element 2.00 ft
  • Paving mold series 1300 wi – extension element 4.00 ft
  • Paving mold series 1300 wi – extension element 1.00 ft
  • Paving mold series 1300 wi – extension element 1.50 ft
  • Paving mold series 1300 wi – extension element 2.00 ft
  • Paving mold series 1300 wi – extension element 4.00 ft
  • Grout box auger without crown – basic width 12 ft
  • Split grout box auger with/without crown basic width 12 ft
  • Grout box auger – extension element 1.00 ft
  • Grout box auger – extension element 1.50 ft
  • Grout box auger – extension element 2.00 ft
  • Grout box auger – extension element 4.00 ft
  • Tamper bar without crown – basic width 12 ft
  • Tamper bar with/without crown – basic width 12 ft
  • Tamper bar – extension element 1.00 ft
  • Tamper bar – extension element 1.50 ft
  • Tamper bar – extension element 2.00 ft
  • Tamper bar – extension element 4.00 ft
  • One side tie bar drive-in device for straight tie bars, max. Ø ¾ in (20 mm), length 2 ft 7 in (800 mm)
  • Two side tie bar drive-in devices for straight tie bars, max. Ø ¾ in (20 mm), length 2 ft 7 in (800 mm)
  • Profile insert for series 1300 wi/1310 wi
• Operator’s Platform
  • Weather canopy for operator’s platform with manual fold-down feature
  • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 19 ft 7 in (6.00 m)
  • Extension of walkway allowing the operator to pass from one side of the machine to the other for working widths of up to 24 ft 6 in (7.50 m)
• Miscellaneous
  • Painting in one special color (RAL)
  • Painting in two special colors (RAL)
  • Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
  • Model without WITOS FleetView
  • High-performance lighting system including eight LED working lights, 24 V
  • Additional plastic water tank, 145 gal (550 l)
  • Self-levelling feature for transport mode
  • Rotating beacon, halogen 24 V, with magnetic base
  • Two flashing beacons, 24 V, with magnetic base
  • Automatic crown adjustment
  • Two LED floodlights including power generator (230 V)
  • Two LED floodlights including power generator (110 V)
  • High-performance lighting system including 4 LED working lights, 24 V, for illuminating the compaction compartment
  • Stringline tensioning system, complete with 3,280 ft 10 in (1,000 m) steel wire rope
  • Additional tensioning winch for stringline tensioning system
  • Stringline tensioning system, complete with 4 x 984 ft (4 x 300 m) nylon rope
  • Radius kit, fiberglass rod as stringline replacement for paving in corners with different radii
  • Machine commissioning (day rate)
  • Export packaging

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.