• Exhaust emissions category:  EU Stage 5/US EPA Tier 4f
• Number of crawler tracks: 3
• Operating weight, CE: 38,360 lbs
• Paving speed: 0-6 m/min
• Travel speed: 0 – 21 m / min
• Displacement: 369.6³
• Max. mold width: 13 ft 1 in
• Max. mold height: 9 ft 10 in
• Height adjustment, mechanical: 1 ft 4 in
• Rated power: 180 kW / 241 hp

Standard Equipment

• Basic Machine
  • Basic machine consisting of engine station and mechanically telescoping front and rear frame sections, including pre-fitting for three or four track units
  • Fuel tank 106 gals (400 l)
  • Electrical system (24 V)
  • Cooling system with temperature-controlled fan speed
  • Hydraulic system including an adequately sized hydraulic oil tank and a pump transfer gearbox with two output shafters and the pumps required for the machine’s basic equipment package
• Main Frame and Height Adjustment
  • Heavy-duty steel frame telescoping in increments of 2 ft 6 in (750 mm) on both sides, front and rear
  • The machine frame is pre-fitted with multiple mounting points for the modular addition of a variety of equipment features
  • Offset paving molds can be connected to the frame on the left or right side of the machine
• Crawler Units and Chassis Linkage
  • Paving speed with B0 track units: 0 – 20 ft/min (0-6 m/min)
  • Transport speed with B0 track units: 0 - 69 ft/min (0-21 m/min)
• Machine Control, Leveling, and Steering
  • WI-CONTROL – high-quality control system ensuring perfect interaction between all machine features
  • Error messages are displayed on the machine’s control screen
  • The existing CAN bus system can be expanded to customer specifications
  • ECO mode: performance-optimized engine management system for reduced diesel consumption and low noise emissions
  • Proportional electrohydraulic leveling and steering by means of a PLC system including two leveling sensors and two steering sensors
  • Sensor mounting brackets, adjustable in height and range
  • Three hydraulic leveling cylinders with a  stroke of 43.3 in (1.10 m)
• Operator’s Platform
  • Ergonomically designed operator’s platform providing a perfect view of the paving process
  • Two control panels with clear, language-independent labeling for ergonomic operation
  • Control panel 1 for machine setup according to site requirements
  • Control panel 2 with multifunctional control screen providing the operator with all relevant machine parameters and allowing settings to be made via a menu; the control panel can be adjusted to all directions of travel and paving configurations
  • One control panel can be stored in the engine compartment; the second control panel can be protected against vandalism and weather by means of a lockable cover
  • Automatic recognition of each machine configuration provides easy orientation for the machine operator
• Miscellaneous
  • Paving Plus package: pivot angle display, speed indicator, and fully digital Ackermann steering
  • Comprehensive toolkit in lockable toolbox
  • Comprehensive safety package with EMERGENCY STOP switches
  • Pre-fitting for installing the WITOS FleetView control unit
  • Filling of the machine’s hydraulic system with mineral hydraulic oil

Standard Equipment, can be replaced with optional equipment if desired

• Main Frame and Height Adjustment
  • Frame elements for mechanical telescoping in increments of 2 ft 6 in (750 mm)
• Crawler Units and Chassis Linkage
  • Model with three B0 track units (four rollers), fitted with triple-grouser steel track pads
  • Model with one manually pivoting track unit connection, front
• Machine Control, Leveling, and Steering
  • Cylinder drives for model with three B0 track units
• Vibration
  • Hydraulic vibrator drive for max. six vibrators
  • Two straight vibrators D66, hydraulically driven
• Concrete Feeding System
  • Belt conveyor 19 ft 8 in (6.00 m) x 2 ft (0.60 m), in folding design, with reversible hydraulic drive, hydraulically adjustable
  • Steel chute
• Concrete Equipment for Offset Paving
  • Offset paving mold up to 2 ft (0.60 m) wide, max. height of 16 in (0.40 m)
  • Version without suspension for offset molds
• Miscellaneous
  • Standard painting in RAL 9001 (cream)
  • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Lighting system including three halogen working lights, 24 V

• Main Frame and Height Adjustment
  • Frame elements for continuous hydraulic telescoping by 5 ft 9 in (1.75 m) on both sides, resulting in a total telescoping capability of 11 ft 6 in (3.50 m)
• Crawler units and Chassis Linkage
  • Model with three B0 track units (four rollers), fitted with polyurethane track pads
  • Model with four B0 track units (four rollers), fitted with triple-grouser steel track pads
  • Model with four B0 track units (four rollers), fitted with polyurethane track pads
  • Model with two manually pivoting track connections, front
  • Model with one hydraulically pivoting track connections, front
  • Model with two hydraulically pivoting track connections, front
• Machine Control, Leveling, and Steering
  • Cylinder drives for model with four B0 track units
  • Cross-slope sensor
  • Additional control console for track unit adjustment
• Vibration
  • Hydraulic vibrator drive for max. 12 vibrators
  • Electric vibrator drive with 40 kVA generator for max. 18 vibrators
  • Two straight vibrators D66, electrically driven
  • Straight vibrator D66, hydraulically driven
  • Straight vibrator D66, electrically driven
  • Curved vibrator D66, hydraulically driven
  • Curved vibrator D76, electrically driven
• Concrete Feeding System
  • Auger conveyor 15 ft 1 in x 16 in (4.60 m x 0.40 m) with reversible hydraulic drive, hydraulically adjustable
  • Auger conveyor 18 ft 8 in x 16 in (5.70 m x 0.40 m) with reversible hydraulic drive, hydraulically adjustable
  • Steel/rubber chute
• Concrete Equipment for Offset Paving
  • Offset paving mold from 2 ft-3 ft 11 in (0.60 m-1.20 m) wide (max. height of 16 in (0.40 m))
  • Offset paving mold from 3 ft 11 in-5 ft 11 in (1.20 m-1.80 m) wide (max. height of 16 in (0.40 m))
  • Offset paving mold up to 2 ft 11 in (0.90 m) high, max. base width of 2 ft (0.60 m), including hopper
  • Offset paving mold up to 4 ft 3 in (1.30 m) high, max. base width of 2 ft (0.60 m), including hopper
  • Split offset paving mold up to 2 ft (0.60 m), max. height of 16 in (0.40 m)
  • Split offset paving mold from 2 ft to 3 ft 11 in (0.60 to 1.20 m) wide, max. height of 16 in (0.40)
• Offset Trimmer
  • Trimmer, basic width, 2 ft (0.60 m), for mounting on the left side
  • Trimmer – extension 8 in (0.20 m) wide, for mounting on the left side
  • Trimmer – extension 16 in (0.40 m) wide, for mounting on the left side
  • Trimmer, basic width, 2 ft (0.60 m), for mounting on the right side
  • Trimmer – extension 8 in (0.20 m) wide, for mounting on the right side
  • Trimmer – extension 16 in (0.40 m) wide, for mounting on the right side
• Operator’s Platform
  • Weather canopy for operator’s platform with manual fold-down feature
• Miscellaneous
  • Painting in one special color (RAL)
  • Painting in two special colors (RAL)
  • Painting in maximum two special colors with the lower part of the machine painted in special color (RAL)
  • WITOS FleetView – professional telematics solution for machine operation and service optimization
  • Model without WITOS FleetView
  • Lighting system including four halogen working lights, 24 V
  • High-performance lighting system including six LED working lights, 24 V
  • High-performance lighting system including eight LED working lights, 24 V
  • Hydraulic high-pressure water cleaning system with 145 gal (550 l) plastic tank
  • Additional plastic water tank, 145 gal (550 l)
  • Additional electrical water pump, 24 V, with 32 ft 10 in (10.00 m) hose and spray gun with handle
  • Rotating beacon, halogen 24 V, with magnetic base
  • Two flashing beacons, 24 V, with magnetic base
  • Two slab tracers
  • Four slab tracers
  • Control console for manual track unit steering
  • Pre-fitting for 3-D leveling
  • Additional slope sensors for 3-D leveling
  • Stringline tensioning system, complete with 3,280 ft (1,000 m) steel wire rope
  • Additional tensioning winch for stringline tensioning system
  • Stringline tensioning system, complete with 4 x 984 ft (4 x 300 m) nylon rope
  • Radius kit, fiberglass rod as stringline replacement for paving in corners with different radii
  • Machine commissioning (day rate)
  • Export packaging

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.