| Main Technical Specifications | |
|---|---|
| MAKE | LeeBoy |
| MODEL | 4130B |
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
New LeeBoy 4130B Road Widener for Sale
The 4130B road widener is a versatile machine that meets your road widening needs. The narrow width design allows for shipping without a permit while shiftable conveyor and foldable hopper wings allow precise placement of material to either side of the machine. Operator console easily shifts from side-to-side and allows a clear view into the front hopper and of the material flow to the strike-off. A vertical lifting hopper improves trailer loading angle. Extendable push rollers insure a variety of trucks can be used to feed the hopper.
| Specs | |
|---|---|
| Strike Off | Contoured strike off for controlled spread of material width, depth and slope with minimum side draft and minimum segregation of materials Basic strike off consist of one 1’ and one 2’ - 3’ sections, extendable Basic strike off is mounted on the right, can be moved to the left if desired Raised, lowered, extended and retracted hydraulically with manual stops for fine adjustment of elevation and slope Outer edger plate assembly included 12” above and below grade On board storage for strike offs and strike off supports |
| Operators Control | Single pivoting control station with supporting rollers: Control station swings outside of frame left or right when working, or centered for transport. Tilting and telescoping steering wheel. Control functions on the operator’s console include: main power, Ignition/key switch, horn, conveyor speed, shuttle and discharge direction, strike off grade, slope and extension, hopper wing, steering, parking brake, hopper lift, lights DM430 Color graphic control screen with digital readouts including engine oil pressure, water temperature, voltmeter and hydraulic oil temperature, tachometer, hour meter, fuel level, and hydraulic pressures screen |
| Body | |
|---|---|
| Brakes | Hydrostatic traction drive primary braking Parking brake controlled by button on operator’s console Failsafe parking brake Foot pedal hydraulic service brake |
| Tires | Rear: Two 385/65 R 22.5 radial, tubeless Front: Two 425/65 R 22.5 radial, tubeless |
| Dimensions | |
|---|---|
| Length | 22’4” |
| Width | 8’6” shipping w/dual strike-offs 10’8” working |
| Height | 10’ |
| Weight | 28,000 lbs. |
| Wheelbase | 9’9” |
| Engine | |
|---|---|
| Engine Make | Cummins |
| Engine Type | Tier 4 Final Engine |
| Horsepower | 130 HP |
| Cooling | Water-cooled |
| Fuel Tank Capacity | 51 Gallons |
| Speed | 1.6 MPH-11.9 MPH |
| Starting System | Electric start |
| Traction Drive | Front-wheel drive axle with transfer case and electric hydraulic controlled 2-speed motor Infinitely variable throughout both operating ranges Full reverse in both speed ranges |
| Hydraulic | |
|---|---|
| Hydraulic Reservoir Capacity | 61 Gallons |
| Operational | |
|---|---|
| Conveyor Belt Width | 24” wide, heavy duty chain over belt w/high temperature service nitrile |
| Hopper Capacity | 3.0 cubic yards |
| Spreader Width | Up to 8’ |
| Hopper Width | 10’ inside receiving |
| Load Angle | 17° |
| Conveyor Speed | 5.09 MPH (0 to 448’ per minute) |
| Push Rollers | Two bearing equipped Compensates for minor directional misalignment of truck with widener Rollers adjustable up and down Roller scrapers to remove material build up |
| Conveyor System | Independent, variable speed, hydrostatic, dual end drive system Two high torque, direct drive hydraulic motors Discharge speed controlled with conveyor speed control knob on operator’s console On/off function controlled with foot switch located on control station Equipped with adjustable wipers to prevent material build up Conveyor assembly able to shift up to 18” either side hydraulically Control the direction of conveyor discharge of material to either side of machine from operator’s console |
| Hopper Wings | Folding |
| Hopper Lift | 6” to 28” |
| Conveyor Shiftable | Up to 18” side-to-side |
| Push Roller Frame Width | 8’4” oscillating |
| Push Roller Length | Extends out 14” |
| Battery | |
|---|---|
| Voltage | 12 Volt |
| Amps | 120 AMP alternator |
Texas, Oklahoma, Kansas, Missouri and Illinois
sales@kirby-smith.com
888-861-0219
