Hitachi ZW310-7

New Hitachi Wheel Loader

New Hitachi ZW310-7 Loader for Sale

LOWER OWNERSHIP COSTS. RAISE COMFORT.

Cabin comfort and the ability to easily adjust machine settings to match the application keep you productive through the entire work shift. Unobstructed visibility and technology built into the ZW310-7 take safety to the next level.
Dimensions
Wheelbase 11’7”
Ground Clearance 1’7”
Turning Radius 21’ (centerline of outside tire)
12’8” (inside of tires)
Overall Length 29’7”-31’
Wo/bucket: 24’5”-25’11”
Overall Height 11’6”
Operating Weight 54,190-54,851 lbs.
Steering Angle Each direction 37°; total 74°
Rear Axle Trunnion support
Final Drive Heavy-duty planetary, mounted inboard
Reach 4’3”-4’10”
Width over Tires 9’7”
Tire Size 26.5R25 (L3)
Tread 7’3”
Loader Clearance Radius 24’5”-25’1” (bucket in carry position)
Steering Type Articulated frame steering
Height of Bucket Pin 1’5” at carry position
Engine
Engine Make Cummins
Engine Model L9 (Stage V)
Engine Type Air-cooled, Direct injection
Cylinders Double-acting piston type
Net Horsepower 312 HP
Bore x Stroke 5.4” x 5.7”
Air Cleaner Two element dry type with restriction indicator
Battery 2 x 12 V
Aspiration Waste-gate turbocharger and intercooled
Cycles 4
Piston Displacement 543.1 cu. in.
Torque Converter Three element, single stage, single phase with lock-up clutch
After-Treatment DPF+SCR system
Travel Speed (Forward/Reverse)
1st: Standard Mode-4.2/3.7 MPH; Power Mode-4.2/4.2 MPH; Power+ Mode-4.3/4.3 MPH
2nd: Standard Mode-7.1/6.4 MPH; Power Mode-7.1/7.1 MPH; Power+ Mode-7.4/7.4 MPH
2nd w/LU Conv. ON: Standard Mode-7.1/6.5 MPH; Power Mode-7.1/7.1 MPH; Power+ Mode-7.4/7.4 MPH
3rd: Standard Mode-13.7/13.7 MPH; Power Mode-13.7/13.7 MPH; Power+ Mode-13.7/13.7 MPH
3rd w/LU Conv. ON: Standard Mode-14.0/14.0 MPH; Power Mode-14/14 MPH; Power+ Mode-14/14 MPH
4th: Standard Mode-22.4/22.4 MPH; Power Mode-22.4/22.4 MPH; Power+ Mode-22.4/22.4 MPH
Cooling Method Forced circulation type
Drivetrain
Axles Semi-floating
Transmission Torque converter, countershaft type powershift with computer-controlled automatic shift and manual shift features
Torque 1636 Nm
Drive System Four-wheel drive system
Brakes Service: Inboard mounted fully hydraulic 4 wheel wet disc brake. Front & rear independent brake circuit
Parking: Spring applied, hydraulically released, located in transmission
Hydraulic
Hydraulic System Arm & bucket are controlled by multifunction lever
Arm controls: Four position valve; Raise, hold, lower, float
Bucket Controls w/automatic bucket return-to-dig control
Three position valve; Roll back, hold, dump
Hydraulic Cylinders Double acting type
Number of Cylinders 6
Hydraulic Cycle Time Lift arm raise: 5.6 seconds
Lift arm lower: 4.1 seconds
Bucket Dump: 1.2 seconds
Total: 10.9 seconds
Hydraulic Filter Full-flow 15 micron return filter in reservoir
Hydraulic Bore x Stroke Arm: 2 x 5.7 x 34.8”
Bucket: 1 x 7.1 x 20.7”
Operational
Bucket Width 10’2”
Dig Depth 0.4”
Bucket Capacity Heaped: 5.1-6.1 yd³
Struck: 4.4-5.4 yd³
Height to Bucket Pin 14’6”-15’11” (hinge fully raised)
Front Axle Fixed to the front frame
Flow Main Pump: 79.3 gallons
Brake and fan and pilot oil Pump: 22.5 gallons
Breakout Force 44,776 lbf
Articulation Angle 37°
Oscillation Angle Total 24° (+12°, -12°)
Pump Type Main Pump: Variable piston type
Fan Pump: Gear type
Rollback Angle Carry Position: 45°
Ground Level: 41°
Full Height: 61°
Dump Clearance 9’1”-11’7”
Static Tipping Load Straight: 33,841-40,675 lbs.
Full Turn: 29,432-35,384 lbs.
Operating Height 19’1”-20’8”
Steering Bore x Stroke 2 x 3.3” x 19.6” (No. Bore x Stroke)
Pressure Main Pump: 4554 PSI
Brake and fan and pilot oil Pump: 2393 PSI
Lift Arm Clearance 12’8”
Departure Angle 30°
Reduction and Differential Gear Two stage reduction with torque proportional differential

ENGINE

  • Aftertreatment device
  • Aftertreatment manual regeneration inhibit switch
  • Aftertreatment manual regeneration switch
  • Air filter double elements
  • Air intake
    • Pre-cleaner (sy-klone type)
  • Anti-clogging radiator (Wide fin pitch radiator)
  • Automatic reversible cooling fan with heat sensing
  • Cartridge-type engine oil filter
  • Cartridge-type fuel main filter
  • Cartridge-type fuel pre-filter
  • Coolant reservoir sight gauge
  • DEF/AdBlue® tank extension filler
  • DEF/AdBlue® tank with ISO magnet adapter
  • Engine auto shut-down control system
  • Engine oil remote drain
  • Fan guard

 

BRAKE SYSTEM

  • Front and rear independent brake circuit
  • Inboard mounted fully hydraulic 4 wheel wet disc
  • Spring-applied/Hydraulic-released parking brake

 

HYDRAULIC SYSTEM

  • Bucket auto leveler (automatic return to dig control)
  • Electric control lever
    • for 3 spools control valve
      • 2 levers and AUX lever for 3rd function
        • Inside layout pattern (3rd - bucket - liftarm)
  • Control lever lock switch
  • Dual lift arm auto leveler
  • Hydraulic filters
  • Lift arm float system
  • Reservoir sight gauge
  • Ride control system (OFF-AUTO type)
  • Work mode selector

 

CAB

  • Adjustable steering column with POP-UP
  • Auto control air conditioner
    • with double intake filter
  • Bluetooth® integrated FM/AM+radio , hands-free calling
  • Camera and monitor
    • Rear view camera and monitor
  • Coat hook
  • Evacuation hammer
  • Front/Rear defroster
  • Glove compartment
  • LED room light
  • Payload checker with tip-off function
  • Rear view mirrors
    • Rear view mirrors
  • Retractable seat belt, 3.0 in (76 mm)
  • ROPS (ISO 3471: 2008), FOPS (ISO 3449: 2008 LEVEL ll): multi-plane isolation mounted for noise
  • Rubber floor mat
  • Seat
    • Heavy duty air suspension seat equipped with horizontal suspension headrest and heater: fabric, high back, adjustable for damper, inclination of the seat, seat depth, weight-height, fore-aft position, reclining angle, armrest angle, headrest height and angle, lumbar support
  • Seat belt reminder
  • Steering system
    • Joystick steering (with wheel steering)
    • Wheel steering
  • Storage
    • Cup holder
    • Document holder
    • Hot and cool box
    • Seatback pocket
    • Smartphone and Tablet device holder
  • Sunscreen roller type
  • Tinted safety glass
    • Front windshield: laminated
    • Others: tempered
  • USB power supply
  • Windshield washer front and rear
  • 2 speakers
  • 8 inch sub monitor

 

MONITORING SYSTEM

  • Gauge: coolant temperature, fuel level, transmission oil temperature
  • Indicator lights: clearance lights, control lever lock, fuel level, high beam, parking brake, preheat, turn signals, work lights, fan reverse indicator, seat belt indicator
    • Indicator on multifunction monitor: F-N-R shift position, gear shift position, clock, DEF alarm indicator, DEF level gauge, ECO indicator, forward/reverse selector switch indicator, hold display, hour meter, joystick steering indicator (optional), odometer, battery volt, speedometer, tachometer, transmission autoshifting indicator, Warning lights: air filter restriction, brake oil low pressure, communication system error, discharge warning, engine oil low pressure, engine warning, hydraulic oil level, low steering oil pressure, overheat, transmission warning
  • Indicator on sub monitor: payload checker, dual auto-leveler indicator rear obstacle detection and warning system (optional) 38 languages selection

 

ELECTRICAL SYSTEM

  • Alternator (95 A)
  • Backup alarm
  • Battery disconnect switch
  • Large capacity batteries
  • Power outlet 12 V and 24 V

 

LIGHTS

  • Clearance lights
  • LED brake and tail lights
  • LED headlights
  • Turn signals with hazard switch
  • Work lights
    • 4 front, 2 rear on cab and 2 rear LED working lights

 

POWER TRAIN

  • Approach speed control
  • Automatic transmission with load sensing system
  • Clutch cut position switch
  • Differential
    • LSD (limited slip differential, front and rear)
  • DSS (Down Shift Switch)
  • Forward/Reverse lever
  • Forward/Reverse selector switch
  • Lock-up clutch (torque converter)
  • Power mode switch
  • Quick power switch
  • Travel mode selector (Auto1-Auto2)

 

TIRES

  • 26.5R25(L3) Bridgestone (VJT)

 

MISCELLANEOUS

  • Articulation lock bar
  • Cab top rail
    • Front rail on the cab top
    • Rear rail on the cab top
  • Cab window cleaning foot plate
  • Counterweight, built-in
  • Drawbar with locking plate
  • Emergency steering
  • Fenders
    • for 26.5R25 (Front and full covered rear fenders with mud flaps)
  • Global e-Service
  • Lift arm
    • Standard lift arm
  • Lift & tie down hooks
  • On board information controller
  • Pilfer proof
    • Battery cover with locking bracket
    • Lockable engine cover
    • Lockable fuel refilling cap
  • Standard tool kit
  • Tool box

HYDRAULIC SYSTEM

  • Electric control lever
    • for 3 spools control valve
      • MF lever and AUX lever for 3rd function

CAB

  • Auto control air conditioner
    • Pre-cleaner for air conditioner
  • Camera and monitor
    • AERIAL ANGLE (Side and rear view camera)
  • Rear obstacle detection system
  • Rear view mirrors
    • Outside (Heated, 2) electrical adjustment retractable mirror stay
  • Retractable seat belt, 3.0 in (76 mm)

MISCELLANEOUS

  • Belly guard (bolt on type) (front/rear)
  • Bucket cylinder guard
  • Front windshield guard
  • Lift arm
    • High lift arm

*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.

View Brochure

Main Technical Specifications
MAKE Hitachi
MODEL ZW310-7

Want to rent it?

Do you want to know if renting makes more economical sense?
Call us and find out today.

Hitachi ZW310-7

print
6715 W. Reno
Oklahoma City, OK 73127 Phone: 888.861.0219
www.kirby-smith.com
CUSTOMER
DATE
PRICE
SALESPERSON

New Hitachi ZW310-7 Loader for Sale

LOWER OWNERSHIP COSTS. RAISE COMFORT.

Cabin comfort and the ability to easily adjust machine settings to match the application keep you productive through the entire work shift. Unobstructed visibility and technology built into the ZW310-7 take safety to the next level.
GENERAL INFORMATION
Manufacturer
Hitachi
Model Year
Model
ZW310-7
Condition
NEW
Dimensions
Wheelbase
11’7”
Ground Clearance
1’7”
Turning Radius
21’ (centerline of outside tire) 12’8” (inside of tires)
Overall Length
29’7”-31’ Wo/bucket: 24’5”-25’11”
Overall Height
11’6”
Operating Weight
54,190-54,851 lbs.
Steering Angle
Each direction 37°; total 74°
Rear Axle
Trunnion support
Final Drive
Heavy-duty planetary, mounted inboard
Reach
4’3”-4’10”
Width over Tires
9’7”
Tire Size
26.5R25 (L3)
Tread
7’3”
Loader Clearance Radius
24’5”-25’1” (bucket in carry position)
Steering Type
Articulated frame steering
Height of Bucket Pin
1’5” at carry position
Engine
Engine Make
Cummins
Engine Model
L9 (Stage V)
Engine Type
Air-cooled, Direct injection
Cylinders
Double-acting piston type
Net Horsepower
312 HP
Bore x Stroke
5.4” x 5.7”
Air Cleaner
Two element dry type with restriction indicator
Battery
2 x 12 V
Aspiration
Waste-gate turbocharger and intercooled
Cycles
4
Piston Displacement
543.1 cu. in.
Torque Converter
Three element, single stage, single phase with lock-up clutch
After-Treatment
DPF+SCR system
Travel Speed
(Forward/Reverse) 1st: Standard Mode-4.2/3.7 MPH; Power Mode-4.2/4.2 MPH; Power+ Mode-4.3/4.3 MPH 2nd: Standard Mode-7.1/6.4 MPH; Power Mode-7.1/7.1 MPH; Power+ Mode-7.4/7.4 MPH 2nd w/LU Conv. ON: Standard Mode-7.1/6.5 MPH; Power Mode-7.1/7.1 MPH; Power+ Mode-7.4/7.4 MPH 3rd: Standard Mode-13.7/13.7 MPH; Power Mode-13.7/13.7 MPH; Power+ Mode-13.7/13.7 MPH 3rd w/LU Conv. ON: Standard Mode-14.0/14.0 MPH; Power Mode-14/14 MPH; Power+ Mode-14/14 MPH 4th: Standard Mode-22.4/22.4 MPH; Power Mode-22.4/22.4 MPH; Power+ Mode-22.4/22.4 MPH
Cooling Method
Forced circulation type
Drivetrain
Axles
Semi-floating
Transmission
Torque converter, countershaft type powershift with computer-controlled automatic shift and manual shift features
Torque
1636 Nm
Drive System
Four-wheel drive system
Brakes
Service: Inboard mounted fully hydraulic 4 wheel wet disc brake. Front & rear independent brake circuit Parking: Spring applied, hydraulically released, located in transmission
Hydraulic
Hydraulic System
Arm & bucket are controlled by multifunction lever Arm controls: Four position valve; Raise, hold, lower, float Bucket Controls w/automatic bucket return-to-dig control Three position valve; Roll back, hold, dump
Hydraulic Cylinders
Double acting type
Number of Cylinders
6
Hydraulic Cycle Time
Lift arm raise: 5.6 seconds Lift arm lower: 4.1 seconds Bucket Dump: 1.2 seconds Total: 10.9 seconds
Hydraulic Filter
Full-flow 15 micron return filter in reservoir
Hydraulic Bore x Stroke
Arm: 2 x 5.7 x 34.8” Bucket: 1 x 7.1 x 20.7”
Operational
Bucket Width
10’2”
Dig Depth
0.4”
Bucket Capacity
Heaped: 5.1-6.1 yd³ Struck: 4.4-5.4 yd³
Height to Bucket Pin
14’6”-15’11” (hinge fully raised)
Front Axle
Fixed to the front frame
Flow
Main Pump: 79.3 gallons Brake and fan and pilot oil Pump: 22.5 gallons
Breakout Force
44,776 lbf
Articulation Angle
37°
Oscillation Angle
Total 24° (+12°, -12°)
Pump Type
Main Pump: Variable piston type Fan Pump: Gear type
Rollback Angle
Carry Position: 45° Ground Level: 41° Full Height: 61°
Dump Clearance
9’1”-11’7”
Static Tipping Load
Straight: 33,841-40,675 lbs. Full Turn: 29,432-35,384 lbs.
Operating Height
19’1”-20’8”
Steering Bore x Stroke
2 x 3.3” x 19.6” (No. Bore x Stroke)
Pressure
Main Pump: 4554 PSI Brake and fan and pilot oil Pump: 2393 PSI
Lift Arm Clearance
12’8”
Departure Angle
30°
Reduction and Differential Gear
Two stage reduction with torque proportional differential

Legal Notice: Manufacturer Name, Logo and Model Information are Registered Trademarks of the Manufacturer.
Specifications and other information are subject to change without notice. No representation of accuracy is made.
Image is believed to be in the public domain or used with permission.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.

New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
LOCATIONS
CAREERS
CONTACT