Want to rent it?
Do you want to know if renting makes more economical sense?
Call us and find out today.
|
Hitachi ZW50 Loader Offering exceptional levels of performance without compromising on efficiency, Hitachi ZW-5b wheel loaders are designed to satisfy the requirements of the North American construction industry. Designed to be reliable, durable and versatile for a variety of job sites, and to operate with low levels of fuel consumption, they incorporate the high quality engineering for which Hitachi is renowned. RELIABILITY
VERSATILITY
QUALITY
TECHNOLOGY
|
| Dimensions | |
|---|---|
| Length | 16’ |
| Width | 5’5” |
| Height | 8’5” |
| Weight | 9,350 lbs. |
| Wheelbase | 6.1’ |
| Ground Clearance | 12’ |
| Turning Radius | 20.6’ |
| Steering Angle | Each direction 41°; total 82° |
| Engine | |
|---|---|
| Engine Make | Kubota |
| Engine Model | D1803-CR-TIE4 |
| Engine Type | Diesel engine, direct injection w/turbocharger and air cooled intercooler |
| Gross Horsepower | 44 HP |
| Net Horsepower | 42 HP |
| Cooling | Water-cooled Module type: Forced circulation type |
| Bore x Stroke | 3.4” x 4.0” |
| Displacement | 112 in³ |
| Gears | Reduction & differential: Limited slip differential (LSD) Final Reduction: Inboard mounted, heavy duty planetary gear |
| Air Cleaner | Dry type (double element) with restriction indicator |
| Fuel Type | #2 Diesel (Requires ultra-low sulfur fuel) |
| Fuel Tank Capacity | 11.9 Gallons |
| Starter | DC 12V-2.7 HP |
| Battery | 12V-800 CCA, 2 units |
| Alternator | DC 12V-70A |
| Governor | All speed electrical type |
| Rated RPM | 400 RPM |
| Aspiration | Turbocharger and intercooled |
| Cycles | 4 |
| Drivetrain | |
|---|---|
| Axles | Semi-floating type, fixed to the front frame, trunnion support |
| Transmission Type | Hydrostatic transmission (HST) automatically controls power and 2-speed |
| Drive System | Four-wheel drive system |
| Brakes | Service: Wet disc in reduction gear box Parking/Emergency: Spring-applied, hydraulically-released wet disc |
| Tires | 15.5/60-18 8PR (L-2) |
| Transmission Control Method | Hydrostatic transmission (HST) automatically controls power and 2-speed |
| Hydraulic | |
|---|---|
| Pump | Electronically controlled, common rail type (Fuel Injection Pump) |
| Hydraulic Tank Capacity | 11.1 Gallons |
| Hydraulic System | Arm and bucket are controlled by mechanical single control lever Arm controls: Four position valve; Raise, hold, lower, float Bucket controls: Four position valve; Dump, hold, tilt, detent |
| Hydraulic Cylinders | Lift (Boom): Two (2) double-acting piston type: 2.8” x 20.9” Tilt (Bucket): Two (2) double-acting piston type: 2.8” x 17.7” Steering: Two (2) double-acting piston type: 2.4” x 9” |
| Number of Cylinders | 3 |
| Bucket | Standard arm with quick-coupler General purpose with bolt-on cutting edges |
| Hydraulic Cycle Time | Front end loading, Z bar linkage system Lifting time (at full load): 5.0 seconds Lowering time (empty): 3.0 seconds Bucket dumping time: 1.0 seconds Total: 9.0 seconds |
| Hydraulic Pressure | 20.6 MPa |
| Relief Valve Setting | 2,987 PSI |
| Hydraulic Pump | Main oil: 1000 PSI HST Charging: 3260 PSI |
| Hydraulic Filter | Full-flow 10 micron return filter |
| Operational | |
|---|---|
| Bucket Width | 5.5’ |
| Dig Depth | 2.0” |
| Tipping Load | Straight: 5,840 lbs. Full Turn: 4,760 lbs. |
| Bucket Capacity | 0.8 yd³ (heaped) 0.7 yd³ (struck) |
| Height to Bucket Pin | 14.5’ (fully raised) |
| Dump Reach | 3’3” |
| Steering | Articulated frame steering. Full hydraulic power steering unit, pilot operation Mechanism: Double-acting piston type |
| Travel Speed - Forward | 5.0-10.6 MPH |
| Travel Speed - Reverse | 7.5-21.1 MPH |
| Rollback @ Ground | 55° |
| Max. Reach | 3.3’ |
| Breakout Force | 5,530 lbs. |
| Oscillation | Angle: Total 16 (+8,-8)° |
| Rollback Angle | 50 deg (Max at carry position) 61 deg (at full height) |
| Dump Clearance | 7’10” |
| Hinge Pin Height | 10’4” |
| Clearance Circle | 10’3” (outside of bucket) 12’8” (outside of tire) |
| Bucket Tilt | 44 deg (at ground position) |
| Static Tipping Load | 5,510 lbs. |
ENGINE
POWERTRAIN
HYDRAULIC SYSTEM
ELECTRICAL
CAB
OTHERS
ALARMS, GAUGES, INDICATORS
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
*Price, if shown, is Manufacturer's Suggested Retail Price (MSRP) and does not include government fees, taxes, dealer freight/preparation, dealer document preparation charges or any finance charges (if applicable). MSRP and/or final actual sales price will vary depending on options or accessories selected.
New Equipment Sales only available in assigned territories where Kirby-Smith Machinery, Inc. is a licensed distributor. Not all manufacturer's brands available at each location. Please contact your local Kirby-Smith branch if you have questions regarding availability.
| Main Technical Specifications | |
|---|---|
| MAKE | Hitachi |
| MODEL | ZW50 |
Do you want to know if renting makes more economical sense?
Call us and find out today.
